Features

• AEC-Q100 qualified

• Two main 32-bit Power Architecture® VLE

compliant CPU core (e200z4), dual issue,

running in lockstep

– Single-precision floating point operations

– 16 KB local instruction SRAM and 64 KB

local data SRAM

– 4 KB I-Cache and 2 KB D-Cache

• One 32-bit Power Architecture® VLE compliant

I/O processor core (e200z2)

– Single-precision floating point operations

– Lightweight Signal Processing Auxiliary

Processing Unit (LSP APU) instruction

support for digital signal processing (DSP)

– 16 KB local instruction SRAM and 48 KB

local data SRAM

• 2624 KB on-chip flash memory

– Supporting EEPROM emulation (64 KB)

• 64 KB on-chip general-purpose SRAM

(+112 KB data RAM included in the CPUs)

• Multi-channel direct memory access controller

(eDMA) with 32 channels

• Dual interrupt controller (INTC)

• Dual phase-locked loops, including one

Frequency-modulated

• System integration unit lite (SIUL)

• Boot Assist Flash (BAF) supports factory

programming using a serial bootload through

the asynchronous CAN or LIN/UART

• Generic timer module (GTM122)

– Intelligent complex timer module

– 88 channels (24 input and 64 output)

– 3 programmable fine grain multi-threaded

cores

– 26 KB of dedicated SRAM

– Hardware support for engine control, motor

control and safety related applications

• Enhanced analog-to-digital converter system

with:

– 1 supervisor 12-bit SAR analog converter

– 4 separate fast 12-bit SAR analog

converters

– 2 separate 16-bit Sigma-Delta analog

converters

• 5 Deserial Serial Peripheral Interface (DSPI)

modules

• 5 LIN and UART communication interface

(LINFlexD) modules

• 3 MCAN interfaces with advanced shared

memory scheme, two supporting ISO CAN-FD

and one supporting TTCAN

• One Ethernet controller 10/100 Mbps,

compliant IEEE 802.3-2008

• Dual-channel FlexRay controller

• Nexus development interface (NDI) per IEEEISTO

5001-2003 standard, with partial support

for 2010 standard

• Device and board test support per Joint Test

Action Group (JTAG) (IEEE 1149.1)

• Single 5 V +/-10% Power supply supporting

cold start conditions (down to 3.0 V)

• Designed for eTQFP144 and eLQFP176