Features

 32-bit ARM® Cortex®-M0-based microcontroller STM32F072RB with 128 kB Flash and 16 kB SRAM

 Dual ports solution based on Certified USB Type-C™ port controller STUSB1602, featuring:

 Type-C FSM with attach/detach and cable orientation detection

 USB PD PHY and BMC transceiver

 High voltage (20 V) technology

 VBUS voltage monitoring

 600 mA VCONN power switch

 VBUS & VCONN discharge paths

 Dead-battery support

 22 V CC lines protection

 VBUS switch gate drivers

 Power connector to interface with external power supply (not included)

 USB 2.0 full speed data communication interface

 RoHS compliant

Specifications

 USB type-C™ cable and connector spec. (rev 1.2)

 USB Power Delivery spec. (rev 2.0)

Description

The STM32 Nucleo pack is designed for USB Type-C™ and Power Delivery specifications. Used with the embedded X-CUBE-USB-PD certified software, the P-NUCLEO-USB002 represents a development tool enabling fast prototyping of USB PD applications leveraging ready-to-use ST componentry and software.

The P-NUCLEO-USB002 kit is designed to exploit the performance of the STM32F072 32-bit microcontroller based on ARM® Cortex®-M0 and two STUSB1602 USB Type-C™ port controllers, for developing applications that manage up to two USB Type-C™ ports.

The STUSB1602 is a Type-C™ controller designed with 20-V technology that integrates a fully-featured USB type-C state machine and a USB PD PHY + BMC driver. This analog front end features: Type-C™ attach and cable orientation detection; Source / Sink / DRP power role configuration; Integrated VCONN power switch; Integrated VBUS & VCONN discharge path; High voltage protection (including CC pins); VBUS switch gate drivers.

The P-NUCLEO-USB002 is fully configurable and ready to support different power roles like provider, consumer or DRP.

The X-CUBE-USB-PD is compliant with the USB Type-C™ 1.2 and USB Power Delivery 2.0 specifications.