Features

 AEC-Q100 qualified

 One full bridge for 6 A load (RON = 150 m)

 Two half bridges for 3 A load (RON = 300 m)

 Two half bridges for 0.5 A load

(RON = 1600 m)

 One high-side driver for 5 A load

(RON = 100 m)

 One configurable high-side driver for up to

1.5 A (RON = 500 m) or 0.35 A

(RON = 1600 m) load

 One configurable high-side driver for 0.7 A

(RON = 800 m) or 0.35 A (RON = 1600 m)

load

 Two high-side drivers for 0.5 A load

(RON = 1600 m)

 Programmable softstart function to drive loads

with higher inrush currents as current limitation

value

 Very low VS current consumption in standby

mode (IS < 6 μA typ; Tj  85 °C)

 Current monitor output for all high-side drivers

 Central two-stage charge pump

 Motor bridge driver with full Rdson down to 6 V

 Device contains temperature warning and

protection

 Open-load detection for all outputs

 Overcurrent protection for all outputs

 Separated half bridges for door lock motor

 Programmable PWM control of all outputs

 STM standard serial peripheral interface (STSPI

3.1)

 Control block for electrochromic element

 Electrochromic element can be negatively

discharged

 Prepared for additional fail-safe path for

H-bridge