Features

 AEC-Q100 qualified

 2 configurable half bridges for 7.5 A load

(RON = 150 mΩ) or 3 A load (RON = 300 mΩ)

 2 half bridges for 0.5 A load (RON = 2000 mΩ)

 1 configurable high-side driver for up to 1.5 A

(RON = 500 mΩ) or 0.35 A (RON = 1600 mΩ)

load

 1 configurable high-side driver for 0.7 A

(RON = 800 mΩ) or 0.35 A (RON = 1600 mΩ)

load

 3 configurable high-side drivers for

0.15 A/0.35 A (RON =2 Ω)

 1 configurable high-side driver for 0.25 A/0.5 A

(RON = 2 Ω) to supply EC Glass MOSFET

 1 configurable P-channel high-side drivers for

0.15 A/0.25 A (RON = 5 Ω)

 Internal 10-bit PWM timer for each stand-alone

high-side driver

 Buffered supply for voltage regulators and 1

high-side driver (OUT15 P-channel) to supply

e.g. external contacts

 Programmable soft-start function to drive loads

with higher inrush currents as current limitation

value for OUT1-6 (i.e. motors) and OUT7,

OUT8 (i.e. bulbs) with thermal expiration

feature

 Flexible HS drivers (OUT7, OUT8 and OUT9)

suitable to drive external LED modules with

high input capacitance

 All the embedded outputs come with protection

and supervision features:

– Current Monitor (high-side only)

– Open-load and Overcurrent

– Thermal warning and Thermal shutdown

 2 fully protected drivers for external MOSFETs in

H-bridge configuration, dual Half bridge

configuration and combined configuration to

drive 3 motors

 Fully protected driver for external high-side

MOSFET

 Control block for electro-chromic element

 One 5 V voltage regulators for microcontroller

supply

 One 5 V voltage tracker for peripheral supply

 Programmable reset generator for power-on

and under voltage

 Configurable window watchdog

 LIN 2.2a compliant (SAEJ2602 compatible and

SAE J2962-1 compliant) transceiver

 Advanced high speed CAN transceiver (ISO

11898-2:2003 /-5:2007 and SAE J2284 & SAE

J2962-2 compliant) with local failure and bus

failure; HS-CAN Transceiver Conformance

Test according to «Interoperability test

specification for high-speed CAN transceiver or

equivalent devices IOPT.CAN v02d00»

 Separated (Isolated) fail-safe block with 2 LS

(RON = 1 Ω) to pull down the gates of the

external HS MOSFETs

 Thermal clusters

 A/D conversion of supply voltages and internal

temperature sensors

 Embedded and programmable VS duty cycle

adjustment for LED driver outputs

 Generator Mode for Power Trunk/Tailgate

applications