Features

■ One half bridge for 7.4 A load (Ron = 150 mΩ)

■ Two half bridges for 5 A load (Ron = 200 mΩ)

■ Two highside drivers for 1.25 A load

(Ron = 800 mΩ)

■ Programmable softstart function to drive loads

with higher inrush currents (i.e.current > 7.4A,

>5A, >1.25A)

■ Very low current consumption in standby mode

(IS < 3μA, typ. Tj ≤ 85°C)

■ All outputs short circuit protected

■ Current monitor output for all highside drivers

■ All outputs over temperature protected

■ Open-load diagnostic for all outputs

■ Overload diagnostic for all outputs

■ Programmable PWM control of all outputs

■ Charge pump output for reverse polarity

protection

Applications

■ Rear door actuator driver with bridges for door

lock and safe lock and two 5W or 10W - light

bulbs.