PRODUCT DESCRIPTION

The SST45VF512, SST45VF010 and SST45VF020 are manufactured with SST’s proprietary, high performance CMOS SuperFlash technology. The Serial Flash is organized as 16 sectors of 4096 Bytes for SST45VF512, 32 sectors of 4096 Bytes for the SST45VF010 and 64 sectors of 4096 Bytes for the SST45VF020. The memory is accessed for Read or Erase/Program by the SPI bus compatible serial protocol. The bus signals are: serial data input (SI), serial data output (SO), serial clock (SCK), write protect (WP#), chip enable (CE#), and hardware reset (RESET#).

The SST45VFxxx devices are offered in 8-pin SOIC package. See Figure 1 for the pinout.

FEATURES:

• Single 2.7-3.6V Read and Write Operations

• Serial Interface Architecture

– SPI Compatible: Mode 0 and Mode 3

• Byte Serial Read with Single Command

• Superior Reliability

– Endurance: 100,000 Cycles (typical)

– Greater than 100 years Data Retention

• Low Power Consumption:

– Active Current: 20 mA (typical)

– Standby Current: 10 µA (typical)

• Sector or Chip-Erase Capability

– Uniform 4 KByte sectors

• Fast Erase and Byte-Program:

– Chip-Erase Time: 70 ms (typical)

– Sector-Erase Time: 18 ms (typical)

– Byte-Program Time: 14 µs (typical)

• Automatic Write Timing

– Internal VPP Generation

• End-of-Write Detection

– Software Status

• 10 MHz Max Clock Frequency

• Hardware Reset Pin (RESET#)

– Resets the device to Standby Mode

• CMOS I/O Compatibility

• Hardware Data Protection

– Protects and unprotects the device from Write operation

• Packages Available

– 8-Pin SOIC (4.9mm x 6mm)