Description

The CXP87852/87860 is a CMOS 8-bit microcomputer which consists of A/D converter, serial interface, timer/counter, time base timer, high precision timing pattern generation circuit, PWM output, VISS/VASS circuit, 32kHz timer/counter, remote control reception circuit, HSYNC counter, VSYNC separator and the measurement circuit which measures signals of capstan FG and drum FG/PG and other servo systems, as well as basic configurations like 8-bit CPU, ROM, RAM and I/O port. They are integrated into a single chip.

Also the CXP87852/87860 provides sleep/stop functions which enable to lower power consumption.

Features

• A wide instruction set (213 instructions) which covers various types of data

— 16-bit operation/multiplication and division/Boolean bit operation instructions

• Minimum instruction cycle 250ns at 16MHz operation (4.5V to 5.5V) 122µs at 32kHz operation (2.7V to 5.5V)

• Incorporated ROM capacity 52K bytes (CXP87852), 60K bytes (CXP87860)

• Incorporated RAM capacity 2048 bytes

• Peripheral functions

— A/D converter 8 bits, 12 channels, successive approximation system(Conversion time of 20.0µs at 16MHz)

— Serial Interface Incorporated buffer RAM (Auto transfer for 1 to 32 bytes), 1 channel

Incorporated 8-bit and 8-stage FIFO

(Auto transfer for 1 to 8 bytes), 1 channel

Incorporated two-wire 8-bit and 8-stage FIFO

(Auto transfer for 1 to 8 bytes), 1 channel

— Timer 8-bit timer, 8-bit timer/counter, 19-bit time base timer, 32kHz timer/counter

— High precision timing pattern generator PPG: maximum of 19 pins, 32 stages programmable

RTG: 5 pins, 2 channels

— PWM/DA gate output PWM: 12 bits, 2 channels (Repetitive frequency of 62kHz at 16MHz)

DA gate pulse output: 13 bits, 4 channels

— Servo input control Capstan FG, drum FG/PG, CTL input

— VSYNC separator

— FRC capture unit Incorporated 26-bit and 8-stage FIFO

— PWM output 14 bits

— VISS/VASS circuit Pulse duty auto detection circuit

— Remote control reception circuit 8-bit pulse measurement counter with on-chip 6-stage FIFO

— HSYNC counter 12-bit event counter (Counts SYNC1 input.)

• Interruption 23 factors, 15 vectors, multi-interruption possible

• Standby mode Sleep/stop

• Package 100-pin plastic QFP

• Piggyback/evaluator CXP87800 100-pin ceramic PQFP