1. Features

 8bits micro-controller with Pipe-line structured 8051 compatible instruction set

 Flash ROM: 16K Bytes

 RAM: internal 256 Bytes, external 512 Bytes

 Operation Voltage:

fOSC = 400k - 16MHz, VDD = 3.6V - 5.5V

 Oscillator (code option):

- Crystal oscillator: 400kHz - 16MHz

- Ceramic oscillator: 400kHz - 16MHz

- Internal RC: 12.3MHz

 30 CMOS bi-directional I/O pins

 4 open-drain type I/O available

 8 sink current strong drive ports

 Built-in pull-up resistor for input pin

 Powerful interrupt sources:

- Timer0, 1, 2

- INT0, 1, 2, 3

- INT40-7

- ADC, EUART, SPI, PWM

 EUART

 Three 16-bit timer/counters T0, T1and T2

 One 12-bit PWM

 Two 8-bit PWM

 SPI interface (Master/Slave Mode)

 8 channels 10-bits Analog Digital Converter (ADC), with comparator function built-in

 Buzzer

 Low Voltage Reset (LVR) function (enabled by code option)

- LVR voltage level 1: 4.1V

- LVR voltage level 2: 3.7V

 CPU Machine cycle: 1 oscillator clock

 Watch Dog Timer (WDT)

 Warm-up Timer

 Support Low power operation modes:

- Idle Mode

- Power-Down Mode

 Flash Type

 Package: LQFP32

2. General Description

The SH79F1617 is a high performance 8051 compatible micro-controller, regard to its build-in Pipe-line instruction fetch structure, that helps the SH79F1617 can perform more fast operation speed and higher calculation performance, if compare SH79F1617 with standard 8051 at same clock speed.

The SH79F1617 retains most features of the standard 8051. These features include internal 256 bytes RAM, UART and Int0-3.In addition, the SH79F1617 provides external 512 bytes RAM, It also contains 16K bytes Flash memory block both for program and data. Also the ADC and PWM timer functions are incorporated in SH79F1617.

For high reliability and low cost issues, the SH79F1617 builds in Watchdog Timer, Low Voltage Reset function. And SH79F1617 also supports two power saving modes to reduce power consumption.