GENERAL DESCRIPTION

The SGM2578A is a single load switch with reverse

current protection function. The device can operate

from 1V to 5.5V single supply and has the ability to

drive up to 2A continuous current.

The device contains a 30mΩ low RON N-MOSFET

controlled by the ON pin. If the power supply is turned

on for the first time, a smart pull-down resistor is used

to float the ON pin until the system is stable. Once the

ON pin reaches a high voltage (> VIH), the pull-down

resistor is disconnected, then the standby current is very

low and power loss can be reduced. The small package

and low RON make the device very suitable for space

limited, battery powered applications.

The device supports a wide input voltage range, which

is suitable for different voltage rails. The rise time is

used to avoid inrush current. The SGM2578A offers the

quick output discharge function in disable status.

The SGM2578A is available in a Green WLCSP0.9×0.9-4B-A package.

FEATURES

● Input Voltage Range: 1V to 5.5V

● Low On-Resistance

 RON = 29mΩ at VIN = 4.35V

 RON = 30mΩ at VIN = 3.3V

 RON = 36mΩ at VIN = 1.0V

● Low Shutdown Current: 90nA (TYP)

● Maximum Continuous Current: 2A

● Reverse Current Protection When Disabled

● Low Threshold 1.8V GPIO Control Input

● Bidirectional Power Supply for Power Zone

Application

● Rise Time:

 SGM2578AAD: 200μs (TYP)

 SGM2578ABD: 5000μs (TYP)

● Quick Output Discharge

● Available in a Green WLCSP-0.9×0.9-4B-A Package

APPLICATIONS

Mobile Phone

Ultrabook

Tablet PC

Digital Camera

Wearable Technology

Solid State Drive