Main

Range of Product 9012G

Pressure sensor type Electromechanical pressure switch

Pressure sensor name 9012G

Pressure Rating 75 psi (517.11 kPa)

Maximum pressure 240 psi

Contacts type and

composition

2(NC-NO), DPDT-DB, Form ZZ, snap action, silver

nickel contacts

Controlled fluid Hydraulic oil -40…250 °F (-40…121 °C))

Non-corrosive liquids

Air

Non-corrosive gas

Fluid connection type 0.25 inch 18 NPTF UL 508

Pressure switch type of

operation

Regulation between 2 thresholds

Scale type Adjustable differential

Local display Without

Complementary

Range on decreasing pressure 1.5…75 psi (10.34…517.11 kPa)

Approx adjustable differential at mid range 3.5…15 psi (24.13…103.42 kPa) +/- 2.5 full scale

Cable entry 0.5 inch NPT conduit entrance

Terminal block type 8 screw terminals

Electrical connection Screw-clamp terminals, AWG 22...AWG 12

Electrical circuit type Control circuit

Local signalling Without

Line Rated Current 3 A 240 V AC A600 NEMA rating designation

6 A 120 V AC A600 NEMA rating designation

0.22 A 125 V DC R300 NEMA rating designation

0.11 A 250 V DC R300 NEMA rating designation

Setting Internal

Enclosure Material Die cast aluminium alloy 380

Pressure actuator Diaphragm nitrile (Buna-N)

Height 5.55 in (140.97 mm)

Depth 2.63 in (66.80 mm)

Width 3.5 in (88.90 mm)

Operating position Any position

Materials in contact with fluid Nitrile (Buna-N)

Zinc plated steel

Short-circuit protection 10 A cartridge overload and short-circuit protection gL

Maximum operating rate 120 cyc/mn

Mechanical durability 5000000 cycles

Repeat accuracy 4

Net Weight 3 lb(US) (1.36 kg)