快充协议控制器

SW2325是一款高集成度的Type-C口/Type-A口快充协议控制器，内嵌ARMCortex-M0内核，最高工作频率为40MHz，内置64KBeFlash、4KBSRAM，并支持I2C和UART通用外设接口。SW2325集成了Type-C接口逻辑，USBPDPHY，VOOC/SCPPHY以及QC/PE/SFCP/TFCP等快充协议的检测电路，并集成光耦反馈和FB反馈驱动电路、NMOS和PMOS驱动电路以及CV/CC控制环路。SW2325内置多种安全保护功能，配合ACDC或DCDC以及少量的外围元器件，即可组成完整的高性能的Type-C口/Type-A口快速充电解决方案。 • 电源管理\n• BC1.2 模块\n• 快充协议\n• 保护机制\n• Type-C 接口\n• 系统控制\n• QFN-20(4x4mm) 封装\n\n;

Side View LED

文件：233.74 Kbytes Page：6 Pages

包装：散装 描述：SWITCH TOGGLE SPDT 4A 30V 开关 拨动开关

钮子开关

包装：散装 描述：SWITCH TOGGLE SPDT 0.4VA 20V 开关 拨动开关

VERY HIGHSPEED, ULTRA LOWPOWERCONSUMPTION 5V POWERED RS-232 DRIVERS AND RECEIVERS

Description The ST232A is a 2 driver, 2 receiver device following EIA/TIA-232 and V.28 communication standard. It is particularly suitable for applications where ±12V is not available. The ST232A uses a single 5V power supply and only four external capacitors (0.1µF). Typical applications are i

5V POWERED MULTI-CHANNEL RS-232 DRIVERS AND RECEIVERS

DESCRIPTION The ST232 is a 2 driver, 2 receiver device following EIA/TIA-232 and V.28 communication standard. It is particularly suitable for applications where ±12V is not available. The ST232 uses a single 5V power supply and only four external capacitors (0.1µF). Typical applications are in:

5V POWERED MULTI-CHANNEL RS-232 DRIVERS AND RECEIVERS

DESCRIPTION The ST232 is a 2 driver, 2 receiver device following EIA/TIA-232 and V.28 communication standard. It is particularly suitable for applications where ±12V is not available. The ST232 uses a single 5V power supply and only four external capacitors (0.1µF). Typical applications are in:

5V POWERED MULTI-CHANNEL RS-232 DRIVERS AND RECEIVERS

DESCRIPTION The ST232 is a 2 driver, 2 receiver device following EIA/TIA-232 and V.28 communication standard. It is particularly suitable for applications where ±12V is not available. The ST232 uses a single 5V power supply and only four external capacitors (0.1µF). Typical applications are in:

5V POWERED MULTI-CHANNEL RS-232 DRIVERS AND RECEIVERS

DESCRIPTION The ST232 is a 2 driver, 2 receiver device following EIA/TIA-232 and V.28 communication standard. It is particularly suitable for applications where ±12V is not available. The ST232 uses a single 5V power supply and only four external capacitors (0.1µF). Typical applications are in: