AF Power Amplifier (Split Power Supply) (40W 40W min, THD = 0.4)

Features • The STK4102II series (STK4172II) and STK4101V series (high-grade type) are pin-compatible in the out put range of 6W to 50W and enable easy design. • Small-sized package whose pin assignment is the same as that of the STK4101II series • Built-in muting circuit to cut off variou

AF Power Amplifier

♦ Features • the STK4172Ⅱ series and STK4101V series (high-grade type) are pin-campatible in the output range of 6 to 50W and enable easy design • Built-in muting circuit to cut off various kinds of pop noise • Greatly reduced heat sink due to substrate temperature 125℃ guaranteed • Ex

AF Power Amplifier (Split Power Supply) (40W 40W min, THD = 0.4%)

AF Power Amplifier (Split Power Supply) (40W 40W min, THD = 0.4)

Features • The STK4102II series (STK4172II) and STK4101V series (high-grade type) are pin-compatible in the out put range of 6W to 50W and enable easy design. • Small-sized package whose pin assignment is the same as that of the STK4101II series • Built-in muting circuit to cut off variou

Features of the IMST Hybird ICs

Audio Power ICs

Features of the IMST Hybird ICs

Audio Power ICs

Single Air-Core Gauge Driver

Description The CS4172 is a monolithic BiCMOS integrated circuit used to translate a digital 10-bit word from a microprocessor/microcontroller to complementary DC outputs. The DC outputs drive an air-core meter commonly used in vehicle instrument panels. The 10 bits of data are used to linearly c

Low-Cost, Precision, High-Side Current-Sense Amplifier

General Description The MAX4172 is a low-cost, precision, high-side current sense amplifier for portable PCs, telephones, and other systems where battery/DC power-line monitoring is critical. High-side power-line monitoring is especially useful in battery-powered systems, since it does not interf

Low-Cost, Precision, High-Side Current-Sense Amplifier

General Description The MAX4172 is a low-cost, precision, high-side current sense amplifier for portable PCs, telephones, and other systems where battery/DC power-line monitoring is critical. High-side power-line monitoring is especially useful in battery-powered systems, since it does not interf