140W MONO BASH POWER AMPLIFIER

DESCRIPTION The STA5100 is a fully integrated power module designed to implement a BASH® amplifier when used in conjunction with STABP01 digital processor. ■ MONOCHIP BRIDGE MONO AMPLIFIER FOR BASH® ARCHITECTURE ■ 110W OUTPUT POWER @ RL = 4 Ω, THD = 0.5 ■ 140W OUTPUT POWER @ RL = 4 Ω, THD = 10

44-volt, 5.5-amp, quad power half bridge

Description STA510A is a monolithic quad half bridge stage in Multipower BCD Technology. The device can be used as dual bridge or reconfigured, by connecting pin CONFIG to VDD, as a single bridge with double current capability, or as half bridges (Binary mode) with halfcurrent capability.

44 V, 5.5 A, quad power half-bridge

Features • Multipower BCD technology • Minimum input/output pulse width distortion • 150 mΩ RDS(on) complementary DMOS output stage • CMOS compatible logic inputs • Thermal protection • Thermal warning output • Undervoltage protection • Short-circuit protection

44 V, 5.5 A, quad power half-bridge

Features • Multipower BCD technology • Minimum input/output pulse width distortion • 150 mΩ RDS(on) complementary DMOS output stage • CMOS compatible logic inputs • Thermal protection • Thermal warning output • Undervoltage protection • Short-circuit protection

44 V, 5.5 A, quad power half-bridge

Features • Multipower BCD technology • Minimum input/output pulse width distortion • 150 mΩ RDS(on) complementary DMOS output stage • CMOS compatible logic inputs • Thermal protection • Thermal warning output • Undervoltage protection • Short-circuit protection

44-V, 5.5-A, quad power half bridge

Description The STA510F is a monolithic, quad, half-bridge stage in multipower BCD technology. The device can be used as dual-bridge or reconfigured, by connecting the CONFIG pin to the Vdd pin, as single-bridge with double current capability, and as half-bridge (binary mode) with half current ca

44 V, 5.5 A, quad power half-bridge

Features • Minimum input/output pulse width distortion • 150 mΩ RDS(on) complementary DMOS output stage • CMOS compatible logic inputs • Thermal protection • Thermal warning output • Undervoltage protection • No power-on, power-off sequence required

44 V, 5.5 A, quad power half-bridge

Features • Minimum input/output pulse width distortion • 150 mΩ RDS(on) complementary DMOS output stage • CMOS compatible logic inputs • Thermal protection • Thermal warning output • Undervoltage protection • No power-on, power-off sequence required

44 V, 5.5 A, quad power half-bridge

Features • Minimum input/output pulse width distortion • 150 mΩ RDS(on) complementary DMOS output stage • CMOS compatible logic inputs • Thermal protection • Thermal warning output • Undervoltage protection • No power-on, power-off sequence required

44 V，5.5 A四功率半桥数字音频放大器

44-V、5.5-A四路功率半桥

44-V, 5.5-A, quad power half-bridge

文件：346.4 Kbytes Page：11 Pages

ROUND INSTRUMENTATION HANDLES

[KEYSTONE] ROUND INSTRUMENTATION HANDLES FERRULES HANDLE MOUNTING SCREWS

510/511 All Welded Diaphragm Seal

FEATURES Compact design allows seals to fit in confined areas Sufficient displacement to drive a wide variety of instrumentation Minimal fill volume All stainless steel construction; other materials available Light weight design

PISTON SEALS

DESCRIPTION The BECA 510 profile is a highperforming, double acting compact piston seal composed of two POM wear/back-up rings, a polyurethane friction ring for dynamic applications and a flexible pre-tightened NBR ring. It can be assembled in a groove according to standard ISO 6547. 

Aluminum Capacitors 125 °C, Miniature, Radial Lead

文件：90.81 Kbytes Page：5 Pages

Standard, Soft Seat

文件：532.33 Kbytes Page：4 Pages