FC-AL Embedded Controller

[VITESSE] Overview The SSC100 is a Fibre Channel NL_Port integrated circuit tailored for embedded control applications. When used in conjunction with Vitesses SSC050 or VSC055 Backplane Controller, the two devices create a chip set solution, which scales to meet system designers requirements for

FC-AL Embedded Controller

Overview\nThe SSC100 is a Fibre Channel NL_Port integrated circuit tailored for embedded control applications. When used in conjunction with Vitesses SSC050 or VSC055 Backplane Controller, the two devices create a chip set solution, which scales to meet system designers requirements for in-band FC-A • Integrated 1Gb/s Serial Transceiver\n• Three I2C Serial Interface Controllers\n• 32-bit, 53Mhz RISC CPU w/debug port\n• Private Loop Direct Attach Profile\n• IPMI 1.0 Compatible\n• RS-232 Monitor Port\n• Four External 1MB Address Ranges\n• External Flash and/or SRAM (60ns to 250ns)\n• Internal 4KB;

THE GLOBAL EXPERT IN SOLID STATE RELAY TECHNOLOGY

DPA Series • 16 Pin DIP SSR • Ratings to 1A @ 280 VAC • SCR output • Voltage or current-control input • Zero-crossing (resistive loads) output

THE GLOBAL EXPERT IN SOLID STATE RELAY TECHNOLOGY

DPA Series • 16 Pin DIP SSR • Ratings to 1A @ 280 VAC • SCR output • Voltage or current-control input • Zero-crossing (resistive loads) output

THE GLOBAL EXPERT IN SOLID STATE RELAY TECHNOLOGY

DPA Series • 16 Pin DIP SSR • Ratings to 1A @ 280 VAC • SCR output • Voltage or current-control input • Zero-crossing (resistive loads) output

Temperature compensated silicon stainless steel pressure sensors

FEATURES • 0 1 bar gage pressure • For corrosive pressure media • Low temperature drift • All welded stainless steel diaphragm construction • Really flat diaphragm • For hostile environments

SMD POWER INDUCTORS

GENERAL SPECIFICATION : a) Temp. rise : 40°C Typ. at Irms b) ǻL/L0A = 35 Typ. at Isat c) Storage temp. : -40°C to +85°C d) Operating temp. : -40°C to +105°C e) Resistance to solder heat : 260°C.10 secs

SMD POWER INDUCTORS

GENERAL SPECIFICATION : a) Temp. rise : 40°C Typ. at Irms b) ǻL/L0A = 35 Typ. at Isat c) Storage temp. : -40°C to +85°C d) Operating temp. : -40°C to +105°C e) Resistance to solder heat : 260°C.10 secs

SMD POWER INDUCTORS

GENERAL SPECIFICATION : a) Temp. rise : 40°C Typ. at Irms b) ǻL/L0A = 35 Typ. at Isat c) Storage temp. : -40°C to +85°C d) Operating temp. : -40°C to +105°C e) Resistance to solder heat : 260°C.10 secs

SMD POWER INDUCTORS

GENERAL SPECIFICATION : a) Temp. rise : 40°C Typ. at Irms b) ǻL/L0A = 35 Typ. at Isat c) Storage temp. : -40°C to +85°C d) Operating temp. : -40°C to +105°C e) Resistance to solder heat : 260°C.10 secs

SMD POWER INDUCTORS

GENERAL SPECIFICATION : a) Temp. rise : 40°C Typ. at Irms b) ǻL/L0A = 35 Typ. at Isat c) Storage temp. : -40°C to +85°C d) Operating temp. : -40°C to +105°C e) Resistance to solder heat : 260°C.10 secs

SMD POWER INDUCTORS

GENERAL SPECIFICATION : a) Temp. rise : 40°C Typ. at Irms b) ǻL/L0A = 35 Typ. at Isat c) Storage temp. : -40°C to +85°C d) Operating temp. : -40°C to +105°C e) Resistance to solder heat : 260°C.10 secs

SMD POWER INDUCTORS

GENERAL SPECIFICATION : a) Temp. rise : 40°C Typ. at Irms b) ǻL/L0A = 35 Typ. at Isat c) Storage temp. : -40°C to +85°C d) Operating temp. : -40°C to +105°C e) Resistance to solder heat : 260°C.10 secs

SMD POWER INDUCTORS

GENERAL SPECIFICATION : a) Temp. rise : 40°C Typ. at Irms b) ǻL/L0A = 35 Typ. at Isat c) Storage temp. : -40°C to +85°C d) Operating temp. : -40°C to +105°C e) Resistance to solder heat : 260°C.10 secs

SMD POWER INDUCTORS

GENERAL SPECIFICATION : a) Temp. rise : 40°C Typ. at Irms b) ǻL/L0A = 35 Typ. at Isat c) Storage temp. : -40°C to +85°C d) Operating temp. : -40°C to +105°C e) Resistance to solder heat : 260°C.10 secs

SMD POWER INDUCTORS

GENERAL SPECIFICATION : a) Temp. rise : 40°C Typ. at Irms b) ǻL/L0A = 35 Typ. at Isat c) Storage temp. : -40°C to +85°C d) Operating temp. : -40°C to +105°C e) Resistance to solder heat : 260°C.10 secs

SMD POWER INDUCTORS

GENERAL SPECIFICATION : a) Temp. rise : 40°C Typ. at Irms b) ǻL/L0A = 35 Typ. at Isat c) Storage temp. : -40°C to +85°C d) Operating temp. : -40°C to +105°C e) Resistance to solder heat : 260°C.10 secs

SMD POWER INDUCTORS

GENERAL SPECIFICATION : a) Temp. rise : 40°C Typ. at Irms b) ǻL/L0A = 35 Typ. at Isat c) Storage temp. : -40°C to +85°C d) Operating temp. : -40°C to +105°C e) Resistance to solder heat : 260°C.10 secs

SMD POWER INDUCTORS

GENERAL SPECIFICATION : a) Temp. rise : 40°C Typ. at Irms b) ǻL/L0A = 35 Typ. at Isat c) Storage temp. : -40°C to +85°C d) Operating temp. : -40°C to +105°C e) Resistance to solder heat : 260°C.10 secs

SMD POWER INDUCTORS

GENERAL SPECIFICATION : a) Temp. rise : 40°C Typ. at Irms b) ǻL/L0A = 35 Typ. at Isat c) Storage temp. : -40°C to +85°C d) Operating temp. : -40°C to +105°C e) Resistance to solder heat : 260°C.10 secs

SMD POWER INDUCTORS

GENERAL SPECIFICATION : a) Temp. rise : 40°C Typ. at Irms b) ǻL/L0A = 35 Typ. at Isat c) Storage temp. : -40°C to +85°C d) Operating temp. : -40°C to +105°C e) Resistance to solder heat : 260°C.10 secs

SMD POWER INDUCTORS

GENERAL SPECIFICATION : a) Temp. rise : 40°C Typ. at Irms b) ǻL/L0A = 35 Typ. at Isat c) Storage temp. : -40°C to +85°C d) Operating temp. : -40°C to +105°C e) Resistance to solder heat : 260°C.10 secs

SMD POWER INDUCTORS

GENERAL SPECIFICATION : a) Temp. rise : 40°C Typ. at Irms b) ǻL/L0A = 35 Typ. at Isat c) Storage temp. : -40°C to +85°C d) Operating temp. : -40°C to +105°C e) Resistance to solder heat : 260°C.10 secs

SMD POWER INDUCTORS

GENERAL SPECIFICATION : a) Temp. rise : 40°C Typ. at Irms b) ǻL/L0A = 35 Typ. at Isat c) Storage temp. : -40°C to +85°C d) Operating temp. : -40°C to +105°C e) Resistance to solder heat : 260°C.10 secs

SMD POWER INDUCTORS

GENERAL SPECIFICATION : a) Temp. rise : 40°C Typ. at Irms b) ǻL/L0A = 35 Typ. at Isat c) Storage temp. : -40°C to +85°C d) Operating temp. : -40°C to +105°C e) Resistance to solder heat : 260°C.10 secs

SMD POWER INDUCTORS

GENERAL SPECIFICATION : a) Temp. rise : 40°C Typ. at Irms b) ǻL/L0A = 35 Typ. at Isat c) Storage temp. : -40°C to +85°C d) Operating temp. : -40°C to +105°C e) Resistance to solder heat : 260°C.10 secs

panel mount

文件：536.5 Kbytes Page：4 Pages

封装/外壳：Hockey Puck 包装：散装 描述：RELAY SSR HV DC 1KVDC 25A 12V 继电器 接触器（固态）

封装/外壳：Hockey Puck 包装：散装 描述：RELAY SSR HV DC 1KVDC 25A 24V 继电器 接触器（固态）

固态接触器

SMD Power Inductor

HIGH SPEED SWITCHING USE INSULATED TYPE

HIGH SPEED SWITCHING USE INSULATED TYPE • IDC DC current 100A • VRRM Repetitive peak reverse voltage 600/800/1000/1200V • trr Reverse recovery time 0.8µs • Insulated Type • UL Recognized Yellow Card No. E80276 (N) File No. E80271 APPLICA

HIGH SPEED SWITCHING USE INSULATED TYPE

HIGH SPEED SWITCHING USE INSULATED TYPE • IDC DC current 100A • VRRM Repetitive peak reverse voltage 600/800/1000/1200V • trr Reverse recovery time 0.8µs • Insulated Type • UL Recognized Yellow Card No. E80276 (N) File No. E80271 APPLICA

HIGH POWER GENERAL USE INSULATED TYPE

HIGH POWER GENERAL USE INSULATED TYPE • IF(AV) Average forward current 100A • VRRM Repetitive peak reverse voltage 400/800V • DOUBLE ARMS • Insulated Type • UL Recognized Yellow Card No. E80276 (N) File No. E80271 APPLICATION AC motor controllers, DC motor con

HIGH POWER GENERAL USE INSULATED TYPE

HIGH POWER GENERAL USE INSULATED TYPE • IF(AV) Average forward current 100A • VRRM Repetitive peak reverse voltage 400/800V • DOUBLE ARMS • Insulated Type • UL Recognized Yellow Card No. E80276 (N) File No. E80271 APPLICATION AC motor controllers, DC motor con

MEDIUM POWER GENERAL USE NON-INSULATED TYPE

MEDIUM POWER GENERAL USE NON-INSULATED TYPE •IT (AV) Average on-state current 100A •VRRM Repetitive peak reverse voltage 400V •VDRM Repetitive peak off-state voltage 400V •TRIPLE ARMS •Non-Insulated Type APPLICATION Welders