2.6GHz 3-Wire BUS Controlled Synthesiser

2.6GHz 3-Wire BUS Controlled Synthesiser The SP5054 is a single-chip frequency synthesiser designed for satellite TV tuning systems. It is a programming variant of the SP5055, allowing the design of one tuner with either I2C bus or 3-wire bus format, depending on which device is inserted. The SP5

2.6GHz 3-Wire BUS Controlled Synthesiser

2.6GHz 3-Wire BUS Controlled Synthesiser The SP5054 is a single-chip frequency synthesiser designed for satellite TV tuning systems. It is a programming variant of the SP5055, allowing the design of one tuner with either I2C bus or 3-wire bus format, depending on which device is inserted. The SP5

2.6GHz 3-Wire BUS Controlled Synthesiser

2.6GHz 3-Wire BUS Controlled Synthesiser The SP5054 is a single-chip frequency synthesiser designed for satellite TV tuning systems. It is a programming variant of the SP5055, allowing the design of one tuner with either I2C bus or 3-wire bus format, depending on which device is inserted. The SP5

2.6GHz 3-Wire BUS Controlled Synthesiser

SERIAL INTERFACE CODEC/FILTER

DESCRIPTION The ETC5057/ETC5054 family consists of A-law and µ–law monolithic PCM CODEC/filters utilizing the A/D and D/A conversion architecture shown in the block diagram below, and a serial PCM interface. The devices are fabricated using doublepoly CMOS process. The encode portion of each devi

SERIAL INTERFACE CODEC/FILTER

DESCRIPTION The ETC5057/ETC5054 family consists of A-law and µ–law monolithic PCM CODEC/filters utilizing the A/D and D/A conversion architecture shown in the block diagram below, and a serial PCM interface. The devices are fabricated using doublepoly CMOS process. The encode portion of each devi

Programmable Synchronous DC-DC Converter Controller for Low Voltage Microprocessors

Description The RC5054A provides complete control and protection for a DC-DC converter optimized for high-performance microprocessor applications. It is designed to drive two N-Channel MOSFETs in a synchronous-rectified buck topology. The RC5054A integrates all of the control, output adjustmen

Programmable Synchronous DC-DC Converter Controller for Low Voltage Microprocessors

Description The RC5054A provides complete control and protection for a DC-DC converter optimized for high-performance microprocessor applications. It is designed to drive two N-Channel MOSFETs in a synchronous-rectified buck topology. The RC5054A integrates all of the control, output adjustmen

N-channel General purpose

文件：38 Kbytes Page：2 Pages