Mounting Capacitors

The MACOM’s Mounting Capacitors are designed for transient protection for MICs and FETs. Since the capacitor substrate is silicon, it provides an optimum match both thermally and mechanically with the device to be mounted. A wide range of sizes and capacitance values are available as standard produc ·High Reliability Silicon, Nitride/Oxide Dielectric\n·Long Term Reliability and Stability\n·Low Loss and Very High Q;

高度集成的数字控制器

SP3400是一款高度集成的数字控制器，适用于符合WPC 1.2.4标准的无线电源发射器。与NU1007一起工作，形成了简单、高性能、低成本的无线发射解决方案，适用于广泛的应用。SP3400集成了所有必备功能，可调节的功率，并与符合WPC标准的接收器保持的通信。集成解调电路去除了外部放大器和比较器。与最小、集成度最高的芯片NU1007搭配，双芯片交钥匙设计提供了最节省空间的解决方案。SP3400在任何瞬态条件下（如接收器负载变化和Rx/Tx耦合变化）可以保持通信和持续充电，提供可靠的充电体验。支持异物检测（FOD），检测金属物体并防止有害加热。还集成了。温、过流保护、输入低电压检测、输入功率限 • 输入电压：4.5V-5.5V \n• 符合WPC 1.2，适用于 A5和A11线圈\n• 可靠、准确的异物检测（FOD）\n• 用于充电状态和故障报告的LED\n• 内置通信解调电路\n• 100KHz至220KHz的脉冲宽度调制输出，100Hz步进\n• 输入低电压检测\n• 限制功率以防止输入源过载\n• 过流保护和通过NTC过温保护 \n• 充电状态蜂鸣器输出\n• 内部振荡器 \n• 与NU1007一起工作，形成高性能的整体解决方案\n• 28 Pin 4mm x 4mm QFN Package•;

1pF, ±30kV Diode Array

Description The SP3400 integrates 2 channels of low capacitance steering diodes and an additional zener diode to provide protection for electronic equipment that may experience destructive electrostatic discharges (ESD). The SP3400 can safely absorb repetitive ESD strikes above the maximum co

1pF, ±30kV Diode Array

Description The SP3400 integrates 2 channels of low capacitance steering diodes and an additional zener diode to provide protection for electronic equipment that may experience destructive electrostatic discharges (ESD). The SP3400 can safely absorb repetitive ESD strikes above the maximum co

低电容ESD保护

• ESD，IEC 61000-4-2，±30kV接触放电，±30kV空气放电 \n• EFT，IEC 61000-4-4，80A（tP=5/50ns） \n• 雷击，IEC61000-4-5第2版，8A（tp=8/20μs） \n• 每次输入/输出的电容为1pF （TYP） \n• 5V电压下的泄漏电流低至0.01μA（典型值） \n• 小型μDFN（JEDEC MO-229）封装提供了直通型设计，可简化PCB布局。 \n• 符合AEC-Q101 \n• 湿度灵敏性等级(MSL -1) \n• 无卤素，无铅，符合RoHS要求;

600mA Buck Converter

DESCRIPTION SP3406 is a high efficiency monolithic synchronous buck regulator using a constant frequency, current mode architecture. The device is available in an adjustable version and fixed output voltages, such as 1.5V,1.8V,etc. Supply current with no load is 30uA and drops to FEATU

1.5A Buck/Boost/Inverting DC-DC Switching Regulator

DESCRIPTION The SP34063A is a monolithic switching regulator control circuit containing the primary functions required for DC-DC converters. This device consists of an internal temperature compensated reference, voltage comparator, controlled duty cycle oscillator with active current limit circ

1.5A Buck/Boost/Inverting DC-DC Switching Regulator

DESCRIPTION The SP34063A is a monolithic switching regulator control circuit containing the primary functions required for DC-DC converters. This device consists of an internal temperature compensated reference, voltage comparator, controlled duty cycle oscillator with active current limit circ

1.5A Buck/Boost/Inverting DC-DC Switching Regulator

DESCRIPTION The SP34063A is a monolithic switching regulator control circuit containing the primary functions required for DC-DC converters. This device consists of an internal temperature compensated reference, voltage comparator, controlled duty cycle oscillator with active current limit circ

1.5A Buck/Boost/Inverting DC-DC Switching Regulator

DESCRIPTION The SP34063A is a monolithic switching regulator control circuit containing the primary functions required for DC-DC converters. This device consists of an internal temperature compensated reference, voltage comparator, controlled duty cycle oscillator with active current limit circ

600mA Buck Converter

DESCRIPTION SP3406 is a high efficiency monolithic synchronous buck regulator using a constant frequency, current mode architecture. The device is available in an adjustable version and fixed output voltages, such as 1.5V,1.8V,etc. Supply current with no load is 30uA and drops to FEATU

SP3423, 0.2pF, /-10kV Diode Array

Description The SP3423 integrates 2 channels of low capacitance steering diodes and and an avalanche breakdown diode to provide protection for electronic equipment that may experience destructive electrostatic discharges (ESD). The SP3423 can safely absorb repetitive ESD strikes above the ma

丝印代码：TKD；SP3423, 0.2pF, /-10kV Diode Array

Description The SP3423 integrates 2 channels of low capacitance steering diodes and and an avalanche breakdown diode to provide protection for electronic equipment that may experience destructive electrostatic discharges (ESD). The SP3423 can safely absorb repetitive ESD strikes above the ma

3.3V Low Power Half-Duplex RS-485 Transceivers with 10Mbps Data Rate

DESCRIPTION The SP3481 and the SP3485 are a family of +3.3V low power half-duplex transceivers that meet the specifications of the RS-485 and RS-422 serial protocols. These devices are pin-to-pin compatible with the Sipex SP481, SP483, and SP485 devices as well as popular industry standards. The

3.3V Low Power Half-Duplex RS-485 Transceivers with 10Mbps Data Rate

DESCRIPTION The SP3481 and the SP3485 are a family of +3.3V low power half-duplex transceivers that meet the specifications of the RS-485 and RS-422 serial protocols. These devices are pin-to-pin compatible with the Sipex SP481, SP483, and SP485 devices as well as popular industry standards. The

3.3V Low Power Half-Duplex RS-485 Transceivers with 10Mbps Data Rate

DESCRIPTION The SP3481 and the SP3485 are a family of +3.3V low power half-duplex transceivers that meet the specifications of the RS-485 and RS-422 serial protocols. These devices are pin-to-pin compatible with the Sipex SP481, SP483, and SP485 devices as well as popular industry standards. The

3.3V Low Power Half-Duplex RS-485 Transceivers with 10Mbps Data Rate

DESCRIPTION The SP3481 and the SP3485 are a family of +3.3V low power half-duplex transceivers that meet the specifications of the RS-485 and RS-422 serial protocols. These devices are pin-to-pin compatible with the Sipex SP481, SP483, and SP485 devices as well as popular industry standards. The

3.3V Low Power Half-Duplex RS-485 Transceivers with 10Mbps Data Rate

DESCRIPTION The SP3481 and the SP3485 are a family of +3.3V low power half-duplex transceivers that meet the specifications of the RS-485 and RS-422 serial protocols. These devices are pin-to-pin compatible with the Sipex SP481, SP483, and SP485 devices as well as popular industry standards. The

3.3V Low Power Slew Rate Limited Half-Duplex RS-485 Transceiver

DESCRIPTION The SP3483 device is part of a family of +3.3V low power half-duplex transceivers that meet the specifications of the RS-485 and RS-422 serial protocols. This device is pin-to-pin compatible with the Exar SP483 device as well as popular industry standards. The SP3483 features Exars Bi

3.3V Low Power Slew Rate Limited Half-Duplex RS-485 Transceiver

DESCRIPTION The SP3483 device is part of a family of +3.3V low power half-duplex transceivers that meet the specifications of the RS-485 and RS-422 serial protocols. This device is pin-to-pin compatible with the Exar SP483 device as well as popular industry standards. The SP3483 features Exars Bi

3.3V Low Power Half-Duplex RS-485 Transceiver

DESCRIPTION The SP3485 device is a +3.3V low power half-duplex transceiver that meets the specifications of the RS-485 and RS-422 serial protocols. This device is pin-to-pin compatible with the Exar SP481, SP483 and SP485 devices as well as popular industry standards. The SP3485 features the Exar

3.3V Low Power Half-Duplex RS-485 Transceivers with 10Mbps Data Rate

DESCRIPTION The SP3481 and the SP3485 are a family of +3.3V low power half-duplex transceivers that meet the specifications of the RS-485 and RS-422 serial protocols. These devices are pin-to-pin compatible with the Sipex SP481, SP483, and SP485 devices as well as popular industry standards. The

3.3V Low Power Half-Duplex RS-485 Transceivers with 10Mbps Data Rate

DESCRIPTION The SP3481 and the SP3485 are a family of +3.3V low power half-duplex transceivers that meet the specifications of the RS-485 and RS-422 serial protocols. These devices are pin-to-pin compatible with the Sipex SP481, SP483, and SP485 devices as well as popular industry standards. The

3.3V power supply, up to 256 nodes, 12Mbps half-duplex, RS485/RS422 transceiver

Features: 3.3V power supply, half-duplex; 1/8 unit load allows up to 256 devices on the bus; Driver output short-circuit protection function; Over temperature protection function; Low power shutdown function; Receiver open circuit protection function; Strong anti-noise ability; Integrated

3.3V power supply, up to 256 nodes, 12Mbps half-duplex, RS485/RS422 transceiver

Features: 3.3V power supply, half-duplex; 1/8 unit load allows up to 256 devices on the bus; Driver output short-circuit protection function; Over temperature protection function; Low power shutdown function; Receiver open circuit protection function; Strong anti-noise ability; Integrated

丝印代码：3485E；Low-Power,Slew-Rate-Limited RS-485/RS-422 Transceivers

Features Fail-safe Circuitry Low Power Consumption Up to 256 Transceivers can be Attached to The Bus Maximum Transmission Rate: 10Mbps ESD: >+15kV SOP8 Package

3.3V Low Power Half-Duplex RS-485 Transceivers with 10Mbps Data Rate

DESCRIPTION The SP3481 and the SP3485 are a family of +3.3V low power half-duplex transceivers that meet the specifications of the RS-485 and RS-422 serial protocols. These devices are pin-to-pin compatible with the Sipex SP481, SP483, and SP485 devices as well as popular industry standards. The

3.3V Low Power Half-Duplex RS-485 Transceiver with 10Mbps Data Rate

DESCRIPTION The SP3485 device is a +3.3V low power half-duplex transceiver that meets the specifications of the RS-485 and RS-422 serial protocols. This device is pin-to-pin compatible with the Exar SP481, SP483 and SP485 devices as well as popular industry standards. The SP3485 features the Exar

3.3V Low Power Half-Duplex RS-485 Transceivers with 10Mbps Data Rate

DESCRIPTION The SP3481 and the SP3485 are a family of +3.3V low power half-duplex transceivers that meet the specifications of the RS-485 and RS-422 serial protocols. These devices are pin-to-pin compatible with the Sipex SP481, SP483, and SP485 devices as well as popular industry standards. The

3.3V Low Power Quad RS-485/RS-422 Line Drivers

DESCRIPTION The SP3486 and the SP3487 are +3.3V low power quad drivers that meet the specifications of the RS-485 and RS-422 serial protocols. ■ RS-485 or RS-422 Quad Differential Line Drivers ■ Operates from a single +3.3V supply ■ Interoperable with +5.0V logic ■ Tri-state Output

3.3V Low Power Quad RS-485/RS-422 Line Drivers

DESCRIPTION The SP3486 and the SP3487 are +3.3V low power quad drivers that meet the specifications of the RS-485 and RS-422 serial protocols. ■ RS-485 or RS-422 Quad Differential Line Drivers ■ Operates from a single +3.3V supply ■ Interoperable with +5.0V logic ■ Tri-state Output

3.3V Low Power Quad RS-485/RS-422 Line Drivers

DESCRIPTION The SP3486 and the SP3487 are +3.3V low power quad drivers that meet the specifications of the RS-485 and RS-422 serial protocols. ■ RS-485 or RS-422 Quad Differential Line Drivers ■ Operates from a single +3.3V supply ■ Interoperable with +5.0V logic ■ Tri-state Output

3.3V Low Power Quad RS-485/RS-422 Line Drivers

DESCRIPTION The SP3486 and the SP3487 are +3.3V low power quad drivers that meet the specifications of the RS-485 and RS-422 serial protocols. ■ RS-485 or RS-422 Quad Differential Line Drivers ■ Operates from a single +3.3V supply ■ Interoperable with +5.0V logic ■ Tri-state Output

3.3V Low Power Quad RS-485/RS-422 Line Drivers

DESCRIPTION The SP3486 and the SP3487 are +3.3V low power quad drivers that meet the specifications of the RS-485 and RS-422 serial protocols. ■ RS-485 or RS-422 Quad Differential Line Drivers ■ Operates from a single +3.3V supply ■ Interoperable with +5.0V logic ■ Tri-state Output

3.3V Low Power Quad RS-485/RS-422 Line Drivers

DESCRIPTION The SP3486 and the SP3487 are +3.3V low power quad drivers that meet the specifications of the RS-485 and RS-422 serial protocols. ■ RS-485 or RS-422 Quad Differential Line Drivers ■ Operates from a single +3.3V supply ■ Interoperable with +5.0V logic ■ Tri-state Output

3.3V Low Power Quad RS-485/RS-422 Line Drivers

DESCRIPTION The SP3486 and the SP3487 are +3.3V low power quad drivers that meet the specifications of the RS-485 and RS-422 serial protocols. ■ RS-485 or RS-422 Quad Differential Line Drivers ■ Operates from a single +3.3V supply ■ Interoperable with +5.0V logic ■ Tri-state Output

3.3V Low Power Quad RS-485/RS-422 Line Drivers

DESCRIPTION The SP3486 and the SP3487 are +3.3V low power quad drivers that meet the specifications of the RS-485 and RS-422 serial protocols. ■ RS-485 or RS-422 Quad Differential Line Drivers ■ Operates from a single +3.3V supply ■ Interoperable with +5.0V logic ■ Tri-state Output

3.3V Low Power Quad RS-485/RS-422 Line Drivers

DESCRIPTION The SP3486 and the SP3487 are +3.3V low power quad drivers that meet the specifications of the RS-485 and RS-422 serial protocols. ■ RS-485 or RS-422 Quad Differential Line Drivers ■ Operates from a single +3.3V supply ■ Interoperable with +5.0V logic ■ Tri-state Output

3.3V Low Power Quad RS-485/RS-422 Line Receivers

DESCRIPTION… The SP3488 and the SP3489 are +3.3V low power quad line receivers that meet the specifications of the RS-485 and RS-422 serial protocols. These devices are pin-to-pin compatible with Sipexs SP488 and SP489 devices as well as popular industry standards. ■ RS-485 or RS-422 Quad Differ

3.3V Low Power Quad RS-485/RS-422 Line Receivers

DESCRIPTION… The SP3488 and the SP3489 are +3.3V low power quad line receivers that meet the specifications of the RS-485 and RS-422 serial protocols. These devices are pin-to-pin compatible with Sipexs SP488 and SP489 devices as well as popular industry standards. ■ RS-485 or RS-422 Quad Differ

3.3V Low Power Quad RS-485/RS-422 Line Receivers

DESCRIPTION… The SP3488 and the SP3489 are +3.3V low power quad line receivers that meet the specifications of the RS-485 and RS-422 serial protocols. These devices are pin-to-pin compatible with Sipexs SP488 and SP489 devices as well as popular industry standards. ■ RS-485 or RS-422 Quad Differ

3.3V Low Power Quad RS-485/RS-422 Line Receivers

DESCRIPTION… The SP3488 and the SP3489 are +3.3V low power quad line receivers that meet the specifications of the RS-485 and RS-422 serial protocols. These devices are pin-to-pin compatible with Sipexs SP488 and SP489 devices as well as popular industry standards. ■ RS-485 or RS-422 Quad Differ

3.3V Low Power Quad RS-485/RS-422 Line Receivers

DESCRIPTION… The SP3488 and the SP3489 are +3.3V low power quad line receivers that meet the specifications of the RS-485 and RS-422 serial protocols. These devices are pin-to-pin compatible with Sipexs SP488 and SP489 devices as well as popular industry standards. ■ RS-485 or RS-422 Quad Differ

3.3V Low Power Quad RS-485/RS-422 Line Receivers

DESCRIPTION… The SP3488 and the SP3489 are +3.3V low power quad line receivers that meet the specifications of the RS-485 and RS-422 serial protocols. These devices are pin-to-pin compatible with Sipexs SP488 and SP489 devices as well as popular industry standards. ■ RS-485 or RS-422 Quad Differ

3.3V Low Power Quad RS-485/RS-422 Line Receivers

DESCRIPTION… The SP3488 and the SP3489 are +3.3V low power quad line receivers that meet the specifications of the RS-485 and RS-422 serial protocols. These devices are pin-to-pin compatible with Sipexs SP488 and SP489 devices as well as popular industry standards. ■ RS-485 or RS-422 Quad Differ

3.3V Low Power Quad RS-485/RS-422 Line Receivers

DESCRIPTION… The SP3488 and the SP3489 are +3.3V low power quad line receivers that meet the specifications of the RS-485 and RS-422 serial protocols. These devices are pin-to-pin compatible with Sipexs SP488 and SP489 devices as well as popular industry standards. ■ RS-485 or RS-422 Quad Differ

3.3V Low Power Quad RS-485/RS-422 Line Receivers

DESCRIPTION… The SP3488 and the SP3489 are +3.3V low power quad line receivers that meet the specifications of the RS-485 and RS-422 serial protocols. These devices are pin-to-pin compatible with Sipexs SP488 and SP489 devices as well as popular industry standards. ■ RS-485 or RS-422 Quad Differ

3.3V Low Power Full-Duplex RS-485 Transceivers with 10Mbps Data Rate

Description The SP3490 and SP3491 devices are 3.3V low power full-duplex transceivers that meet the specifications of the RS-485 and RS-422 serial protocols. These devices are pin-to-pin compatible with the MaxLinear SP490 and SP491 devices as well as popular industry standards. The SP3490 and SP

3.3V Low Power Full-Duplex RS-485 Transceivers with 10Mbps Data Rate

Description The SP3490 and SP3491 devices are 3.3V low power full-duplex transceivers that meet the specifications of the RS-485 and RS-422 serial protocols. These devices are pin-to-pin compatible with the MaxLinear SP490 and SP491 devices as well as popular industry standards. The SP3490 and SP

3.3V Low Power Full-Duplex RS-485 Transceivers with 10Mbps Data Rate

Description The SP3490 and SP3491 devices are 3.3V low power full-duplex transceivers that meet the specifications of the RS-485 and RS-422 serial protocols. These devices are pin-to-pin compatible with the MaxLinear SP490 and SP491 devices as well as popular industry standards. The SP3490 and SP

3.3V Low Power Full-Duplex RS-485 Transceivers with 10Mbps Data Rate

Description The SP3490 and SP3491 devices are 3.3V low power full-duplex transceivers that meet the specifications of the RS-485 and RS-422 serial protocols. These devices are pin-to-pin compatible with the MaxLinear SP490 and SP491 devices as well as popular industry standards. The SP3490 and SP

3.3V Low Power Full-Duplex RS-485 Transceivers with 10Mbps Data Rate

Description The SP3490 and SP3491 devices are 3.3V low power full-duplex transceivers that meet the specifications of the RS-485 and RS-422 serial protocols. These devices are pin-to-pin compatible with the MaxLinear SP490 and SP491 devices as well as popular industry standards. The SP3490 and SP

3.3V Low Power Full-Duplex RS-485 Transceivers with 10Mbps Data Rate

Description The SP3490 and SP3491 devices are 3.3V low power full-duplex transceivers that meet the specifications of the RS-485 and RS-422 serial protocols. These devices are pin-to-pin compatible with the MaxLinear SP490 and SP491 devices as well as popular industry standards. The SP3490 and SP

3.3V Low Power Full-Duplex RS-485 Transceivers with 10Mbps Data Rate

Description The SP3490 and SP3491 devices are 3.3V low power full-duplex transceivers that meet the specifications of the RS-485 and RS-422 serial protocols. These devices are pin-to-pin compatible with the MaxLinear SP490 and SP491 devices as well as popular industry standards. The SP3490 and SP

3.3V Low Power Full-Duplex RS-485 Transceivers with 10Mbps Data Rate

Description The SP3490 and SP3491 devices are 3.3V low power full-duplex transceivers that meet the specifications of the RS-485 and RS-422 serial protocols. These devices are pin-to-pin compatible with the MaxLinear SP490 and SP491 devices as well as popular industry standards. The SP3490 and SP

3.3V Low Power Full-Duplex RS-485 Transceivers with 10Mbps Data Rate

Description The SP3490 and SP3491 devices are 3.3V low power full-duplex transceivers that meet the specifications of the RS-485 and RS-422 serial protocols. These devices are pin-to-pin compatible with the MaxLinear SP490 and SP491 devices as well as popular industry standards. The SP3490 and SP

3.3V Low Power Full-Duplex RS-485 Transceivers with 10Mbps Data Rate

Description The SP3490 and SP3491 devices are 3.3V low power full-duplex transceivers that meet the specifications of the RS-485 and RS-422 serial protocols. These devices are pin-to-pin compatible with the MaxLinear SP490 and SP491 devices as well as popular industry standards. The SP3490 and SP

3.3V Low Power Full-Duplex RS-485 Transceivers with 10Mbps Data Rate

Description The SP3490 and SP3491 devices are 3.3V low power full-duplex transceivers that meet the specifications of the RS-485 and RS-422 serial protocols. These devices are pin-to-pin compatible with the MaxLinear SP490 and SP491 devices as well as popular industry standards. The SP3490 and SP

3.3V Low Power Full-Duplex RS-485 Transceivers with 10Mbps Data Rate

Description The SP3490 and SP3491 devices are 3.3V low power full-duplex transceivers that meet the specifications of the RS-485 and RS-422 serial protocols. These devices are pin-to-pin compatible with the MaxLinear SP490 and SP491 devices as well as popular industry standards. The SP3490 and SP

3.3V Low Power Full-Duplex RS-485 Transceivers with 10Mbps Data Rate

Description The SP3490 and SP3491 devices are 3.3V low power full-duplex transceivers that meet the specifications of the RS-485 and RS-422 serial protocols. These devices are pin-to-pin compatible with the MaxLinear SP490 and SP491 devices as well as popular industry standards. The SP3490 and SP