Ultra-Low Capacitance Diode Array for ESD Protection

Description The SP3010 integrates 4 channels of ultra-low capacitance rail-to-rail diodes and an additional zener diode to provide protection for electronic equipment that may experience destructive electrostatic discharges (ESD). This robust device can safely absorb repetitive ESD strikes at the

0.45pF Rail Clamp Array

Description\nThe SP3010 integrates 4 channels of ultra-low capacitance rail-to-rail diodes and an additional zener diode to provide protection for electronic equipment that may experience destructive electrostatic discharges (ESD). This robust device can safely absorb repetitive ESD strikes at the m

SP3010 Series 0.45pF Rail Clamp Array

文件：285.52 Kbytes Page：4 Pages

包装：散装 描述：TOOL SOLDERING ESD SAFE 焊接，拆焊，返修产品 配件

低电容ESD保护

SP3010将4通道超低电容轨到轨二极管和附加的齐纳二极管组合在一起，适用于保护可能会遭受静电放电（ESD）破坏的电子设备。 这款功能强大的二极管可以IEC61000-4-2国际标准规定的最高级别（4级，±8KV接触放电）安全地吸收反复性ESD放电，且性能不会下降。 其超低的负载电容也使它成为保护HDMI、USB3.0、USB2.0和IEEE 1394等高速信号引脚的理想之选。 • ESD，IEC61000-4-2，±8kV（触点），±15kV（空气）\n• EFT，IEC61000-4-4，40A （5/50ns）\n• 雷击，IEC61000-4-5，3A (tP=8/20µs）\n• 低电容：每次输入/输出的电容为0.45pF (TYP)\n• 电压5V时的（标准）低泄漏电流为0.1μA\n• 小型μDFN封装节省了电路板空间;

Ultra-Low Capacitance Diode Array for ESD Protection

Description The SP3010 integrates 4 channels of ultra-low capacitance rail-to-rail diodes and an additional zener diode to provide protection for electronic equipment that may experience destructive electrostatic discharges (ESD). This robust device can safely absorb repetitive ESD strikes at the

30.0AMP Schottky Barrier Rectifiers

FEATURES * Low forward voltage drop * High current capability * High reliability * High surge current capability * Epitaxial construction MECHANICAL DATA * Case: Molded plastic * Epoxy: UL 94V-0 rate flame retardant * Lead: Lead solderable per MIL-STD-202, method 208 guaranteed * Pol

SP3010 Series 0.45pF Rail Clamp Array

文件：285.52 Kbytes Page：4 Pages

封装/外壳：10-UFDFN 包装：卷带（TR）剪切带（CT） 描述：TVS DIODE 6VWM 12.3VC 10UDFN 电路保护 TVS - 二极管

Schottky Barrier Rectifiers

SINGLE-PHASE SILICON BRIDGE-P.C. MTG 2A, HEAT-SINK MTG 3A(VOLTAGE - 50 to 1000 Volts CURRENT - 3.0 Amperes)

VOLTAGE - 50 to 1000 Volts CURRENT - 3.0 Amperes FEATURES • Surge overload rating—50 Amperes peak • Low forward voltage drop and reverse leakage • Small size, simple installation • Plastic package has Underwriter Laboratory Flammability Classification 94V-O • Reliable low

IN-LINE GLASS PASSIVATED SINGLE-PHASE BRIDGE RECTIFIER(VOLTAGE - 50 to 1000 Volts CURRENT - 3.0 Amperes)

VOLTAGE 50 to 1000 Volts CURRENT 3.0 Amperes FEATURES • Plastic material has Underwriters Laboratory Flammability Classification 94V-O • Ideal for printed circuit board • Reliable low cost construction utilizing molded plastic technique • Both normal and Pb free product are available : No

6-Pin DIP Random-Phase Optoisolators Triac Driver Output

6-Pin DIP Random-Phase Optoisolators Triac Driver Output (250 Volts Peak) The MOC3010 Series consists of gallium arsenide infrared emitting diodes, optically coupled to silicon bilateral switch and are designed for applications requiring isolated triac triggering, low–current isolated ac switchin

LATERAL N-CHANNEL BROADBAND RF POWER MOSFET

Designed for IMARSAT satellite up link at 1.6 to 1.64 GHz, 28 volts, Class AB, CW amplifier applications. • Guaranteed Performance @ 1.6 GHz, 28 Volts Output Power = 10 Watts Minimum Gain = 9.5 dB @ 10 Watts Minimum Efficiency = 45 @ 10 Watts • High Gain, Rugged Device • Bottom Side

FAST SWITCHING PLASTIC RECTIFIER(VOLTAGE - 50 to 1000 Volts CURRENT - 3.0 Amperes)

VOLTAGE 50 to 1000 Volts CURRENT 3.0 Amperes FEATURES • High current capability. • Plastic package has Underwriters Laboratory Flammability Classification 94V-O utilizing Flame Retardant Epoxy Molding Compound. • Low leakage. • Exceeds environmental standards of MIL-S-19500/228 • Fas