Two Channel Direct Drive Speech Controller?

INTRODUCTION SNC583 is a two-channel voice synthesizer IC with PWM direct drive circuit. It built-in a 4-bit tiny controller with one 4-bit input port and two 4-bit I/O ports. By programming through the tiny controller in SNC583, user’s varied applications including voice section combination, key

1 CH Speech, PWM/DAC output

SNC583 is a two-channel voice synthesizer IC with PWM direct drive circuit. It built-ina 4-bit tiny controller with one 4-bit input port and two 4-bit I/O ports. By programmingthrough the tiny controller in SNC583, user’s varied applications including voicesection combination, key trigger arrangemen • Working Voltage :  2.4V - 5.5V\n• 61 seconds @6KHZ sample rate\n• 8 I/O\n• 4 input pin\n• 128*4 bits RAM size\n• Max. 16K*10 program ROM\n• 184K*10 ROM size\n• IR carrier signal is provided\n• Built in a high quality speech synthesizer\n• PWM Direct Drive circuit\n• fixed current D/A output\n• Sys;

CATV amplifier module

DESCRIPTION Hybrid amplifier module for CATV systems operating over a frequency range of 40 to 550 MHz at a voltage supply of 24 V (DC). FEATURES • Excellent linearity • Extremely low noise • Silicon nitride passivation • Rugged construction • Optimal reliability ensured by TiPtAu metallize

128 Channel Serial to Parallel Converter with Push-Pull Outputs

General Description The Supertex HV583 is a 128-channel low voltage serial to high voltage parallel converter with push-pull outputs. This device has been designed for use as a display driver. It can also be used in any application requiring multiple output, high voltage current sourcing and si

128 Channel Serial to Parallel Converter with Push-Pull Outputs

General Description The Supertex HV583 is a 128-channel low voltage serial to high voltage parallel converter with push-pull outputs. This device has been designed for use as a display driver. It can also be used in any application requiring multiple output, high voltage current sourcing and si

Silicon Rectifier Diode Schottky, RF Switch

Description: The NTE583 is a metal to silicon junction diode featuring high breakdown, low turn–on voltage and ultrafast switching. This device is primarly intented for high level UHF/VHF detection and pulse application with broad dynamic range.