Direct Drive Speech Controller

INTRODUCTION SNC202 is a single channel voice synthesizer IC with PWM direct drive circuit. It built-in a 4-bit tiny controller with one 4-bit I/O port. By programming through the tiny controller in SNC202, user’s varied applications including voice section combination, key trigger arrangement, o

Direct Drive Speech Controller

1 CH Speech, PWM/DAC output

SNC202S is a single channel voice synthesizer IC with PWM direct drive circuit. Itbuilt-in a 4-bit tiny controller with one 4-bit I/O port. By programming through thetiny controller in SNC202S, user’s varied applications including voice section combination,key trigger arrangement, output control, an • Working Voltage : 2.4V - 5.5V.\n• 6 seconds @6KHZ sample rate\n• I/O Port :\n  - 4 I/O : P3\n  - High driving/sink current : P3.2, P3.3\n• 32*4 bits RAM\n• Max. 16K program ROM\n• 20K*10 ROM size\n• Event Mark function\n• PWM Direct Drive circuit output\n• D/A output\n• Low Power Reset\n• System c;

Direct Drive Speech Controller

INTRODUCTION SNC202S is a single channel voice synthesizer IC with PWM direct drive circuit. It built-in a 4-bit tiny controller with one 4-bit I/O port. By programming through the tiny controller in SNC202S, user’s varied applications including voice section combination, key trigger arrangement,

SUPERFAST RECOVERY RECTIFIERS(VOLTAGE - 50 to 600 Volts CURRENT - 2.0 Amperes)

FEATURES ● Superfast recovery times-epitaxial construction ● Low forward voltage, high current capability ● Exceeds environmental standards of MIL-S-19500/228 ● Hermetically sealed ● Low leakage ● High surge capability ● Plastic package has Underwriters Laboratories Flammability Classificat

IN-LINE GLASS PASSIVATED SINGLE-PHASE BRIDGE RECTIFIER(VOLTAGE - 50 to 1000 Volts CURRENT - 2.0 Amperes)

FEATURES • Plastic material has Underwriters Laboratory Flammability Classification 94V-O • Ideal for printed circuit board • Reliable low cost construction utilizing molded plastic technique • Surge overload rating : 60 Amperes peak

FAST SWITCHING PLASTIC RECTIFIER(VOLTAGE - 50 to 1000 Volts CURRENT - 2.0 Amperes)

VOLTAGE - 50 to 1000 Volts CURRENT - 2.0 Amperes FEATURES High current capability Plastic package has Underwriters Laboratory Flammability Classification 94V-O utilizing Flame Retardant Epoxy Molding Compound 2.0 ampere operation at TA =55 ¢J with no thermal runaway

SCHOTTKY BARRIER RECTIFIERS(2.0A,20-60V)

Using the Schottky Barrier principle with a Molybdenum barrier metal. These state-of-the-art geometry features epitaxial construction with oxide passivation and metal overly contact. Ideally suited for low voltage, high frequency rectification, or as free wheeling and polarity protection diodes.

ULTRAFAST SWITCHING RECTIFIER(VOLTAGE - 50 to 1000 Volts CURRENT - 2.0 Amperes)

VOLTAGE 50 to 1000 Volts CURRENT 2.0 Amperes FEATURES • Plastic package has Underwriters Laboratory Flammability Classification 94V-O utilizing Flame Retardant Epoxy Molding Compound • Exceeds environmental standards of MIL-S-19500/228. • Ultra Fast switching for high efficiency. • In