OCTAL BUS TRANSCEIVERS AND REGISTERS WITH 3-STATE OUTPUTS

FEATURES · Operate From 1.65 V to 3.6 V · Inputs Accept Voltages to 5.5 V · Max t pd of 7.4 ns at 3.3 V · Typical V OLP (Output Ground Bounce) 2 V at V CC = 3.3 V, TA = 25°C · Support Mixed-Mode Signal Operation on

OCTAL BUS TRANSCEIVERS AND REGISTERS WITH 3-STATE OUTPUTS

文件：632.14 Kbytes Page：19 Pages

封装/外壳：24-TSSOP（0.173"，4.40mm 宽） 包装：管件 描述：IC TXRX NON-INVERT 3.6V 24TSSOP 集成电路（IC） 缓冲器，驱动器，接收器，收发器

OCTAL BUS TRANSCEIVERS AND REGISTERS WITH 3-STATE OUTPUTS

FEATURES · Operate From 1.65 V to 3.6 V · Inputs Accept Voltages to 5.5 V · Max t pd of 7.4 ns at 3.3 V · Typical V OLP (Output Ground Bounce) 2 V at V CC = 3.3 V, TA = 25°C · Support Mixed-Mode Signal Operation on

OCTAL BUS TRANSCEIVERS AND REGISTERS WITH 3-STATE OUTPUTS

文件：196.57 Kbytes Page：13 Pages

Octal transceiver/register with dual enable 3-State

DESCRIPTION The 74LVC652 is a high performance, low-power, low-voltage Si-gate CMOS device, superior to most advanced CMOS compatible TTL families. Inputs can be driven from either 3.3V or 5.0V devices. In 3-State operation, outputs can handle 5V. This feature allows the use of these devices as

Octal transceiver/register with dual enable 3-State

DESCRIPTION The 74LVC652 is a high performance, low-power, low-voltage Si-gate CMOS device, superior to most advanced CMOS compatible TTL families. Inputs can be driven from either 3.3V or 5.0V devices. In 3-State operation, outputs can handle 5V. This feature allows the use of these devices as

Octal transceiver/register with dual enable 3-State

DESCRIPTION The 74LVC652 is a high performance, low-power, low-voltage Si-gate CMOS device, superior to most advanced CMOS compatible TTL families. Inputs can be driven from either 3.3V or 5.0V devices. In 3-State operation, outputs can handle 5V. This feature allows the use of these devices as

Octal transceiver/register with dual enable 3-State

DESCRIPTION The 74LVC652 is a high performance, low-power, low-voltage Si-gate CMOS device, superior to most advanced CMOS compatible TTL families. Inputs can be driven from either 3.3V or 5.0V devices. In 3-State operation, outputs can handle 5V. This feature allows the use of these devices as