SN74LVC2T45-Q1 Automotive Dual-Bit Dual-Supply Bus Transceiver With Configurable Voltage Translation

1 Features • AEC-Q100 qualified for automotive applications • Fully configurable dual-rail design allows each port to operate over the full 1.65V to 5.5V power-supply range • VCC isolation feature – if either VCC input is at GND, both ports are in the high-impedance state • DIR input circui

具有可配置电压转换和三态输出的增强型产品双位双电源收发器

DUAL-BIT DUAL-SUPPLY BUS TRANSCEIVER

文件：187.84 Kbytes Page：25 Pages

Dual supply translating transceiver; 3-state

1. General description The 74LVC2T45; 74LVCH2T45 are dual bit, dual supply translating transceivers with 3-state outputs that enable bidirectional level translation. They feature two 2-bits input-output ports (nA and nB), a direction control input (DIR) and dual supply pins (VCC(A) and VCC(B)).

DUAL BIT DUAL POWER SUPPLY TRANSLATING TRANSCEIVER WITH 3 STATE OUTPUTS

Features  Wide Supply Voltage Range:  VCC(A): from 1.2V to 5.5V  VCC(B): from 1.2V to 5.5V  ± 24mA Output Drive at 3.3V  CMOS Low Power Consumption 16µA Maximum ICC  High Noise Immunity  IOFF Supports Partial-Power-Down Mode Operation  IOFF Controlled by Either VCC Being at 0V  I

2-Bit Dual-Supply Bus Transceiver with Configurable Voltage Translation

GENERAL DESCRIPTION The 74LVC2T45 is a 2-bit, dual-supply bus transceiver with configurable voltage translation. The device has two separate configurable power-supply rails. The A and B ports track the VCCA supply and VCCB supply respectively. The supply voltage pins accept voltage range fro

Dual supply translating transceiver; 3-state

Dual supply translating transceiver; 3-state

文件：1.30801 Mbytes Page：36 Pages