SN74LV244A Octal Buffers and Drivers With 3-State Outputs

1 Features • VCC operation of 2 V to 5.5 V • Maximum tpd of 6.5 ns at 5 V • Typical VOLP (output ground bounce) 2.3 V at VCC = 3.3 V, TA = 25°C • Support mixed-mode voltage operation on all ports • Ioff supports parti

Octal buffer/line driver; 3-state

1. General description The 74LV244 is an 8-bit buffer/line driver with 3-state outputs. The device can be used as two 4-bit buffers or one 8-bit buffer. The device features two output enables (1OE and 2OE), each controlling four of the 3-state outputs. A HIGH on nOE causes the outputs to assume

Octal buffer/line driver 3-State

DESCRIPTION The 74LV244 is a low-voltage Si-gate CMOS device and is pin and function compatible with 74HC/HCT244. The 74LV244 is an octal non-inverting buffer/line driver with 3-State outputs. The 3-State outputs are controlled by the output enable inputs 1OEand 2OE. A HIGH on nOEcauses the out

Octal buffer/line driver; 3-state

1. General description The 74LV244A is an 8-bit buffer/line driver with 3-state outputs. The device features two output enables (1OE and 2OE). A HIGH on nOE causes the associated outputs to assume a high-impedance OFF-state. Inputs are overvoltage tolerant. This feature allows the use of these

Octal buffer/line driver; 3-state

1. General description The 74LV244A is an 8-bit buffer/line driver with 3-state outputs. The device features two output enables (1OE and 2OE). A HIGH on nOE causes the associated outputs to assume a high-impedance OFF-state. Inputs are overvoltage tolerant. This feature allows the use of these

OCTAL BUFFERS/DRIVERS WITH 3-STATE OUTPUTS

文件：697.61 Kbytes Page：18 Pages