SNx4HCT574 Octal Edge-Triggered D-Type Flip-Flips With 3-State Outputs

1 Features • Operating voltage range of 4.5V to 5.5V • High-current 3-state noninverting outputs drive bus lines directly or up to 15 LSTTL loads • Low power consumption, 80μA max ICC • Typical tpd = 22ns • ±6mA output drive at 5V • Low input current of 1μA max • Inputs are TTL-voltage com

OCTAL EDGE-TRIGGERED D-TYPE FLIP-FLOPS WITH 3-STATE OUTPUTS

文件：439.38 Kbytes Page：16 Pages

OCTAL EDGE-TRIGGERED D-TYPE FLIP-FLOPS WITH 3-STATE OUTPUTS

文件：1.24237 Mbytes Page：18 Pages

封装/外壳：20-TSSOP（0.173"，4.40mm 宽） 功能：标准 包装：卷带（TR）剪切带（CT）Digi-Reel® 得捷定制卷带 描述：IC FF D-TYPE SNGL 8BIT 20TSSOP 集成电路（IC） 触发器

OCTAL EDGE-TRIGGERED D-TYPE FLIP-FLOPS WITH 3-STATE OUTPUTS

文件：439.38 Kbytes Page：16 Pages

OCTAL EDGE-TRIGGERED D-TYPE FLIP-FLOPS WITH 3-STATE OUTPUTS

文件：1.24237 Mbytes Page：18 Pages

封装/外壳：20-TSSOP（0.173"，4.40mm 宽） 功能：标准 包装：卷带（TR） 描述：IC FF D-TYPE SNGL 8BIT 20TSSOP 集成电路（IC） 触发器

Octal D-type flip-flop; positive edge-trigger; 3-state

1. General description The 74HC574; 74HCT574 is an 8-bit positive-edge triggered D-type flip-flop with 3-state outputs. The device features a clock (CP) and output enable (OE) inputs. The flip-flops will store the state of their individual D-inputs that meet the set-up and hold time requirement

Octal D-type flip-flop; positive edge-trigger; 3-state

GENERAL DESCRIPTION The 74HC/HCT574 are high-speed Si-gate CMOS devices and are pin compatible with low power Schottky TTL (LSTTL). They are specified in compliance with JEDEC standard no. 7A. FEATURES • 3-state non-inverting outputs for bus oriented applications • 8-bit positive edge-triggere

Octal D-type flip-flop; positive edge-trigger; 3-state

GENERAL DESCRIPTION The 74HC/HCT574 are high-speed Si-gate CMOS devices and are pin compatible with low power Schottky TTL (LSTTL). They are specified in compliance with JEDEC standard no. 7A. FEATURES • 3-state non-inverting outputs for bus oriented applications • 8-bit positive edge-triggere

Octal D-type flip-flop; positive edge-trigger; 3-state

1. General description The 74HC574; 74HCT574 is an 8-bit positive-edge triggered D-type flip-flop with 3-state outputs. The device features a clock (CP) and output enable (OE) inputs. The flip-flops will store the state of their individual D-inputs that meet the set-up and hold time requirement

Octal D-type flip-flop; positive edge-trigger; 3-state

GENERAL DESCRIPTION The 74HC/HCT574 are high-speed Si-gate CMOS devices and are pin compatible with low power Schottky TTL (LSTTL). They are specified in compliance with JEDEC standard no. 7A. FEATURES • 3-state non-inverting outputs for bus oriented applications • 8-bit positive edge-triggere