OCTAL BUFFERS AND LINE DRIVERS WITH 3-STATE OUTPUTS

Operating Voltage Range of 4.5 V to 5.5 V Low Power Consumption, 80-μA Max ICC Typical tpd = 12 ns ±6-mA Output Drive at 5 V Low Input Current of 1 μA Max Inputs Are TTL-Voltage Compatible High-Current 3-State Outputs Interface Directly With System Bus or Can Drive Up To 15 LSTTL Loads Da

Octal buffer/line driver; 3-state; inverting

GENERAL DESCRIPTION The 74HC/HCT540 are high-speed Si-gate CMOS devices and are pin compatible with low power Schottky TTL (LSTTL). They are specified in compliance with JEDEC standard no. 7A. FEATURES • Inverting outputs • Output capability: bus driver • ICC category: MSI

Octal buffer/line driver; 3-state; inverting

1. General description The 74HC540; 74HCT540 is an 8-bit inverting buffer/line driver with 3-state outputs. The device features two output enables (OE1 and OE2). A HIGH on OEn causes the outputs to assume a high-impedance OFF-state. Inputs include clamp diodes. This enables the use of current l

CMOS Digital Integrated Circuits Silicon Monolithic

Functional Description • Octal Bus Buffer 74HCT540D: INVERTING, 3-STATE OUTPUTS 74HCT541D: NON-INVERTING, 3-STATE OUTPUTS General The 74HCT540D/74HCT541D are high speed CMOS OCTAL BUS BUFFERs fabricated with silicon gate C2MOS technology. These devices may be used as a level converter for

Octal buffer/line driver; 3-state; inverting

GENERAL DESCRIPTION The 74HC/HCT540 are high-speed Si-gate CMOS devices and are pin compatible with low power Schottky TTL (LSTTL). They are specified in compliance with JEDEC standard no. 7A. FEATURES • Inverting outputs • Output capability: bus driver • ICC category: MSI

Octal buffer/line driver; 3-state inverting