QUADRUPLE 2-LINE TO 1-LINE DATA SELECTORS/MULTIPLEXERS

Operating Voltage Range of 4.5 V to 5.5 V High-Current Outputs Drive Up To 15 LSTTL Loads Typical tpd = 15 ns Low Power Consumption, 80-μA Max ICC ±6-mA Output Drive at 5 V Low Input Current of 1 μA Max Inputs Are TTL-Voltage Compatible Buffered Inputs and Outputs description/ordering i

QUADRUPLE 2-LINE TO 1-LINE DATA SELECTORS/MULTIPLEXERS |

Operating Voltage Range of 4.5 V to 5.5 V High-Current Outputs Drive Up To 15 LSTTL Loads Typical tpd = 15 ns Low Power Consumption, 80-μA Max ICC ±6-mA Output Drive at 5 V Low Input Current of 1 μA Max Inputs Are TTL-Voltage Compatible Buffered Inputs and Outputs description/ordering i

Quad 2?묲nput Data Selectors / Multiplexers High?뭁erformance Silicon?묰ate CMOS

The 74HCT157 is identical in pinout to the LS157. The device inputs are compatible with standard CMOS outputs; with pullup resistors, they are compatible with LSTTL outputs. This device routes 2 nibbles (A or B) to a single port (Y) as determined by the Select input. The data is presented at the

Quad 2-input multiplexer

GENERAL DESCRIPTION The 74HC/HCT157 are high-speed Si-gate CMOS devices and are pin compatible with low power Schottky TTL (LSTTL). They are specified in compliance with JEDEC standard no. 7A. FEATURES • Non-inverting data path • Output capability: standard • ICC category: MSI

Quad 2-input multiplexer

1. General description The 74HC157; 74HCT157 is a quad 2-input multiplexer. The device features select (S) and enable E inputs. A HIGH on S selects data source 1, a LOW data source 0. A HIGH on E forces all the outputs (1Y to 4Y) LOW. Inputs include clamp diodes. This enables the use of current

Quad 2-input multiplexer

Quad 2-input multiplexer