SNx4HCT125 Quadruple Bus Buffer Gates With 3-State Outputs

1 Features • Operating voltage range of 4.5 V to 5.5 V • High-current can drive up to 15 LSTTL loads • Low power consumption, 80-μA max ICC • Typical tpd = 12 ns • ±6-mA output drive at 5 V • Low input current of 1 μA max • Inputs are TTL-voltage compatible • High-current 3-state outputs d

Quad buffer/line driver; 3-state

GENERAL DESCRIPTION The 74HC/HCT125 are high-speed Si-gate CMOS devices and are pin compatible with low power Schottky TTL (LSTTL). They are specified in compliance with JEDEC standard no. 7A. FEATURES • Output capability: bus driver • ICC category: MSI

Quad buffer/line driver; 3-state

1. General description The 74HC125; 74HCT125 is a quad buffer/line driver with 3-state outputs controlled by the output enable inputs (nOE). A HIGH on nOE causes the outputs to assume a high impedance OFF-state. Inputs include clamp diodes. This enables the use of current limiting resistors to

Quad buffer/line driver; 3-state

Quad buffer/line driver; 3-state

GENERAL DESCRIPTION The 74HC/HCT125 are high-speed Si-gate CMOS devices and are pin compatible with low power Schottky TTL (LSTTL). They are specified in compliance with JEDEC standard no. 7A. FEATURES • Output capability: bus driver • ICC category: MSI

QUADRUPLE 3-STATE BUFFERS OE LOW

文件：284.89 Kbytes Page：8 Pages