16-BIT BUFFER/DRIVER WITH 3-STATE OUTPUTS

FEATURES · Member of the Texas Instruments Widebus™ Family · DOC™ (Dynamic Output Control) Circuit Dynamically Changes Output Impedance, Resulting in Noise Reduction Without Speed Degradation · Less Than 2-ns Maximum Propagation Delay at 2.5-V and 3.3-V VCC · Dynamic Drive Capability Is E

16-BIT BUFFER/DRIVER WITH 3-STATE OUTPUTS

FEATURES · Member of the Texas Instruments Widebus™ Family · DOC™ (Dynamic Output Control) Circuit Dynamically Changes Output Impedance, Resulting in Noise Reduction Without Speed Degradation · Less Than 2-ns Maximum Propagation Delay at 2.5-V and 3.3-V VCC · Dynamic Drive Capability Is E

封装/外壳：48-TFSOP（0.240"，6.10mm 宽） 包装：管件 描述：IC BUF NON-INVERT 3.6V 48TSSOP 集成电路（IC） 缓冲器，驱动器，接收器，收发器

16-BIT BUFFER/DRIVER WITH 3-STATE OUTPUTS

文件：303.7 Kbytes Page：13 Pages

16-BIT BUFFER/DRIVER WITH 3-STATE OUTPUTS

文件：829.02 Kbytes Page：16 Pages

16-bit buffer/line driver; 3-state 3.6 V tolerant

DESCRIPTION The 74AVC16244 is a 16-bit non-inverting buffer/line driver with 3-state outputs. This device can be used as four 4-bit buffers, two 8-bit buffers or one 16-bit buffer. FEATURES • Wide supply voltage range from 1.2 to 3.6 V • Complies with JEDEC standard no. 8-1A/5/7 • CMOS low po

16-bit buffer/line driver; 3.6 V tolerant; 3-state

1 General description The 74AVC16244 is a 16-bit non-inverting buffer/line driver with 3-state outputs. This device can be used as four 4-bit buffers, two 8-bit buffers or one 16-bit buffer. The 3‑state outputs are controlled by the output enable inputs nOE. A HIGH level on input nOE causes th

16-bit buffer/line driver; 3.6 V tolerant; 3-state

1 General description The 74AVC16244 is a 16-bit non-inverting buffer/line driver with 3-state outputs. This device can be used as four 4-bit buffers, two 8-bit buffers or one 16-bit buffer. The 3‑state outputs are controlled by the output enable inputs nOE. A HIGH level on input nOE causes th

16-bit buffer/line driver; 3-state 3.6 V tolerant

DESCRIPTION The 74AVC16244 is a 16-bit non-inverting buffer/line driver with 3-state outputs. This device can be used as four 4-bit buffers, two 8-bit buffers or one 16-bit buffer. FEATURES • Wide supply voltage range from 1.2 to 3.6 V • Complies with JEDEC standard no. 8-1A/5/7 • CMOS low po

2.5V 16-Bit Buffer Driver with 3-State Outputs

Product Description PI74AVC+16244 is a non-inverting 16-bit buffer/driver designed for low-voltage 1.65V to 3.6V VCC operation. The buffer/driver is designed specifically to improve both the performance and density of 3-state memory address drivers, clock drivers, and bus-oriented receivers and