Programmable -48V Hot-Swap Controller with Forced Shut Down

INTRODUCTION The SMH4802 is designed to control in-rush current during hot swapping of plug-in cards operating in a distributed power environment. The device drives an external power MOSFET switch that connects the supply to the load and protects against over-current conditions that might disrupt

Programmable -48V Hot-Swap Controller with Forced Shut Down

Programmable -48V Hot-Swap Controller with Forced Shut Down

文件：631.75 Kbytes Page：19 Pages

Headphone Stereo Power Amplifier

Overview The LA4802T is a headphone stereo power amplifier for portable CD and MD players. It features a high signal-to noise ratio, a high ripple rejection ratio, low distortion, and low current drain. Features • High signal-to-noise ratio (100 dB typical at 7.5 µV) • High ripple re

Headphone Stereo Power Amplifier

Overview The LA4802T is a headphone stereo power amplifier for portable CD and MD players. It features a high signal-to noise ratio, a high ripple rejection ratio, low distortion, and low current drain. Features • High signal-to-noise ratio (100 dB typical at 7.5 µV) • High ripple re

Low-Voltage PECL Differential Clock

General Description The LCK4802 is a low-voltage, 3.3 V PECL differential clock synthesizer. The LCK4802 supports two differential PECL output pairs with frequencies from 336 MHz to 1 GHz. The clock is designed to support single and multiple processor systems that require PECL differential inputs

PFC/PWM Controller Combo with Green Mode

GENERAL DESCRIPTION The ML 4802 is a controller for power factor corrected, switched mode power supplies that offers Green Mode operation and reduced start-up and operating currents. Green Mode is an efficiency improving circuit feature which operates automatically in low power situations. This f

PFC/PWM Controller Combo with Green Mode

GENERAL DESCRIPTION The ML 4802 is a controller for power factor corrected, switched mode power supplies that offers Green Mode operation and reduced start-up and operating currents. Green Mode is an efficiency improving circuit feature which operates automatically in low power situations. This f