丝印代码：SMDA12C；Bidirectional TVS Diode Array

文件：266.25 Kbytes Page：3 Pages

丝印代码：SMDA12C；Transient Voltage Suppressors for ESD Protection

Feature 54~300 Watts Peak Pulse Power per Line (tp=8/20μs) Protects four bidirectional I/O lines Low clamping voltage Working voltages : 3.3V, 5V, 12V, 15V and 24V Low leakage current IEC61000-4-2 (ESD) ±15kV (air), ±8kV (contact) IEC61000-4-4 (EFT) 40A (5/50ηs) Applications RS-232, RS-

丝印代码：SMDA12C；Transient Voltage Suppressors for ESD Protection

Feature Moisture Sensitivity Level (MSL -1) AEC-Q101 qualified 50~300 Watts Peak Pulse Power per Line (tp=8/20μs) Protects four bidirectional I/O lines Low clamping voltage Working voltages : 3.3V, 5V, 12V, 15V and 24V and 36V Low leakage current IEC61000-4-2 (ESD) ±15kV (air), ±8kV (conta

500 WATT MULTI-LINE TVS ARRAY

DESCRIPTIoN The SMDAxx and SMDAxxC Series are mult-line transient voltage suppressor arrays that provides board level protecton for standard TTL and MOS bus line applicatons against the damaging effects of ESD, tertary lightning and switching transients. The SMDA Series has a peak pulse power rat

Bidirectional TVS Array for Protection of Four Lines

Description The SMDAxxC series of TVS arrays are designed to provide bidirectional protection for sensitive electronics from damage or latch-up due to ESD, lightning and other voltage-induced transient events. Each device will protect four data or I/O lines. They are available with operating volt

SO-8

Description The SMDAXXC series of TVS arrays have been designed to provide bidirectional protection for sensitive electronics from damage due to voltage transients caused by electrostatic discharge (ESD), electrical fast transient (EFT), lightning and other voltage-induced transient events. The d

TVSarray Series

DESCRIPTION (300 and 500 watt) This 8 pin 4 line Unidirectional or Bidirectional array is designed for use in applications where protection is required at the board level from voltage transients caused by electrostatic discharge (ESD) as defined by IEC 1000-4-2, electrical fast transients (EFT) p

STANDARD CAPACITANCE TVS ARRAY

DESCRIPTIoN The SMDAxx and SMDAxxC Series are mult-line transient voltage suppressor arrays that provides board level protecton for standard TTL and MOS bus line applicatons against the damaging effects of ESD, tertary lightning and switching transients. The SMDA Series has a peak pulse power rat

Transient Voltage Suppressors

DESCRIPTION (300 and 500 watt) This 8 pin 4 line Unidirectional or Bidirectional array is designed for use in applications where protection is required at the board level from voltage transients caused by electrostatic discharge (ESD) as defined by IEC 1000-4-2, electrical fast transients (EFT) p

TVS ARRAY SERIES

Protects 3.3, 5, 12, 15, 24, 36V Components Bidirectional Provides Electrically Isolated Protection 300 W @ 8/20 us Protects 4 Lines SO-8 Packaging “-A” is an AEC-Q101 qualified device This is a Pb − Free Device All SMC parts are traceable to the wafer lot Additional testing can be offere

4线12 V 300瓦双向TVS阵列保护

The SMDAxxC series of TVS arrays are designed to provide bidirectional protection for sensitive electronics from damage or latch-up due to ESD, lightning and other voltage-induced transient events. ·Protects 4 I/O lines\n·Working voltage: 12 V\n·Transient protection for data lines to·IEC 61000-4-2 (ESD) ± 15 kV (air), ± 8 kV (contact)\n·IEC 61000-4-4 (EFT) 40 A (5/50 ns)\n·IEC 61000-4-5 (Lightning) 12 A (8/20 µs)\n\n·Bidirectional protection\n·Small SO-8 package\n·Low leakage current\n·Low ope;

Bidirectional TVS Array for Protection of Four Lines

文件：167.52 Kbytes Page：7 Pages

TVSarray Series

文件：103.66 Kbytes Page：2 Pages

500 WATT MULTI-LINE TVS ARRAY

文件：510.03 Kbytes Page：6 Pages

500 WATT MULTI-LINE TVS ARRAY

文件：512.169 Kbytes Page：6 Pages

封装/外壳：8-SOIC（0.154"，3.90mm 宽） 包装：卷带（TR）剪切带（CT）Digi-Reel® 得捷定制卷带 描述：TVS DIODE 12VWM 19VC 8-SO 电路保护 TVS - 二极管

500 WATT MULTI-LINE TVS ARRAY

文件：512.169 Kbytes Page：6 Pages

丝印代码：SMDA12C-7；Transient Voltage Suppressors for ESD Protection

Feature 250~320 Watts Peak Pulse Power per Line (tp=8/20μs) Protects Seven Data Lines Working Voltage : 5V, 12V, 15V and 24V Monolithic Design RoHS Compliant IEC61000-4-2 (ESD) ±30kV (air), ±30kV (contact):5V~15V IEC61000-4-2 (ESD) ±15V (air), ±8kV (contact):24V IEC61000-4-4 (EFT) 40A (5/5

丝印代码：SMDA12C-8；Transient Voltage Suppressors for ESD Protection

Features 312~400 Watts Peak Pulse Power per Line (tp=8/20μs) Protects Seven Data lines Low Capacitance Working Voltage; 5~24V Low leakage current IEC61000-4-2(ESD) ±20kV (air),±15kV (contact) IEC61000-4-4 (EFT) 40A (5/50ηs) Applications Microprocessor Based Equipment RS-232 and RS-422

丝印代码：SMDA12C-7；Transient Voltage Suppressors for ESD Protection

Feature Moisture Sensitivity Level (MSL -1) AEC-Q101 qualified 250~320 Watts Peak Pulse Power per Line (tp=8/20μs) Protects seven data lines Working Voltage : 5V, 12V, 15V and 24V Monolithic Design RoHS compliant IEC61000-4-2 (ESD) ±30kV (air), ±30kV (contact):5V~15V IEC61000-4-2 (ESD) ±1

丝印代码：SMDA12C-5；TVS DIODE ARRAY FOR FIVE I/O LINES PROTECTION

文件：482.3 Kbytes Page：3 Pages

丝印代码：SMDA12C-7；Bidirectional TVS Array for Protection of Seven Lines

文件：271.31 Kbytes Page：3 Pages

TRANSIENT VOLTAGE SUPPRESSOR

DESCRIPTION (300 watt) This TRANSIENT VOLTAGE SUPPRESSOR (TVS) array is packaged in an SO-8 configuration giving protection to 4 Bidirectional data or interface lines. It is designed for use in applications where protection is required at the board level from voltage transients caused by electr

TVSarray Series

DESCRIPTION (300 watt) This TRANSIENT VOLTAGE SUPPRESSOR (TVS) array is packaged in an SO-8 configuration giving protection to 4 Bidirectional data or interface lines. It is designed for use in applications where protection is required at the board level from voltage transients caused by electr

4 LINE TVSarray

This TRANSIENT VOLTAGE SUPPRESSOR (TVS) array is packaged in an SO-8 configuration giving protection to 4 unidirectional or bi-directional data or interface lines. It is designed for use in applications where protection is required at the board level from voltage transients caused by electrostatic d Protects 3.0/3.3 volt up to 24 volt components Protects 4 unidirectional or bidirectional lines \n Provides electrically-isolated protection \n RoHS Compliant devices available by adding “e3” suffix \n Tape & Reel per EIA Standard 481 \n 13 inch reel; 2,500 pieces;

TVS ARRAY SERIES

Protects 3.3, 5, 12, 15, 24, 36 V Components Bidirectional Provides Electrically Isolated Protection 300 W @ 8/20 us Protects 4 Lines SO-8 Packaging This is a Pb − Free Device All SMC parts are traceable to the wafer lot Additional testing can be offered upon request

TVS ARRAY SERIES

Protects 3.3, 5, 12, 15, 24, 36 V Components Bidirectional Provides Electrically Isolated Protection 300 W @ 8/20 us Protects 4 Lines SO-8 Packaging This is a Pb − Free Device All SMC parts are traceable to the wafer lot Additional testing can be offered upon request

TVSarray Series

DESCRIPTION (300 watt) This TRANSIENT VOLTAGE SUPPRESSOR (TVS) array is packaged in a SO-8 configuration giving protection to 4 Bidirectional data or interface lines. It is designed for use in applications where protection is required at the board level from voltage transients caused by electro

TVSarray Series

DESCRIPTION (300 watt) This TRANSIENT VOLTAGE SUPPRESSOR (TVS) array is packaged in a SO-8 configuration giving protection to 4 Bidirectional data or interface lines. It is designed for use in applications where protection is required at the board level from voltage transients caused by electro

SO-8

Description The SMDAXXC series of TVS arrays have been designed to provide bidirectional protection for sensitive electronics from damage due to voltage transients caused by electrostatic discharge (ESD), electrical fast transient (EFT), lightning and other voltage-induced transient events. The d

SO-8

Description The SMDAXXC-5 series of TVS arrays have been designed to provide bidirectional protection for sensitive electronics from damage due to voltage transients caused by electrostatic discharge (ESD), electrical fast transient (EFT), lightning and other voltage-induced transient events. The

TRANSIENT VOLTAGE SUPPRESSOR

DESCRIPTION (300 watt) This TRANSIENT VOLTAGE SUPPRESSOR (TVS) array is packaged in a SO-8 configuration giving protection to 5 Bidirectional data or interface lines. It is designed for use in applications where protection is required at the board level from voltage transients caused by electrost

TVSarray Series

DESCRIPTION (300 watt) This TRANSIENT VOLTAGE SUPPRESSOR (TVS) array is packaged in a SO-8 configuration giving protection to 5 Bidirectional data or interface lines. It is designed for use in applications where protection is required at the board level from voltage transients caused by electrost

Bidirectional TVS Array for Protection of Five Lines???

Description The SMDAxxC-5 series of transient voltage suppressors are designed to protect components which are connected to data and transmission lines from voltage surges caused by electrostatic discharge (ESD), electrical fast transients (EFT), and lightning. Features ◆ Transient protection f

TVS ARRAY SERIES

Protects 3.3, 5, 12, 15, 24, 36 V Components Bidirectional Provides Electrically Isolated Protection 300 W @ 8/20 us Protects 5 Lines SO-8 Packaging This is a Pb − Free Device All SMC parts are traceable to the wafer lot Additional testing can be offered upon request

Bidirectional TVS Array for Protection of Five Lines???

Description The SMDAxxC-5 series of transient voltage suppressors are designed to protect components which are connected to data and transmission lines from voltage surges caused by electrostatic discharge (ESD), electrical fast transients (EFT), and lightning. Features ◆ Transient protection f

Bidirectional TVS Array for Protection of Five Lines???

Description The SMDAxxC-5 series of transient voltage suppressors are designed to protect components which are connected to data and transmission lines from voltage surges caused by electrostatic discharge (ESD), electrical fast transients (EFT), and lightning. Features ◆ Transient protection f

Bidirectional TVS Array for Protection of Seven Lines????

Description The SMDAxxC-7 series of transient voltage suppressors are designed to protect components which are connected to data and transmission lines from voltage surges caused by electrostatic discharge (ESD), electrical fast transients (EFT), and lightning. Features ◆ Transient protection f

TVSarray Series

DESCRIPTION (300 watt) This TRANSIENT VOLTAGE SUPPRESSOR (TVS) array is packaged in an SO-8 configuration giving protection to 7 Bidirectional data or interface lines. It is designed for use in applications where protection is required at the board level from voltage transients caused by electros

TRANSIENT VOLTAGE SUPPRESSOR

DESCRIPTION (300 watt) This TRANSIENT VOLTAGE SUPPRESSOR (TVS) array is packaged in an SO-8 configuration giving protection to 7 Bidirectional data or interface lines. It is designed for use in applications where protection is required at the board level from voltage transients caused by electros

Bidirectional TVS Array for Protection of Seven Lines????

Description The SMDAxxC-7 series of transient voltage suppressors are designed to protect components which are connected to data and transmission lines from voltage surges caused by electrostatic discharge (ESD), electrical fast transients (EFT), and lightning. Features ◆ Transient protection f

Bidirectional TVS Array for Protection of Seven Lines????

Description The SMDAxxC-7 series of transient voltage suppressors are designed to protect components which are connected to data and transmission lines from voltage surges caused by electrostatic discharge (ESD), electrical fast transients (EFT), and lightning. Features ◆ Transient protection f

Bidirectional TVS Array for Protection of Eight Lines????

Description The SMDAxxC-8 series of transient voltage suppressors are designed to protect components which are connected to data and transmission lines from voltage surges caused by electrostatic discharge (ESD), electrical fast transients (EFT), and lightning. Features ◆ Transient protect

SURFACE MOUNT DIODE ARRAY TRANSIENT VOLTAGE SUPPRESSOR

Stand-off Voltage - 5.0 to 24 Volts Peak Pulse Power - 300 Watts FEATURES ♦ Plastic package has Underwriters Laboratory Flammability Classification 94V-0 ♦ Offers ESD protection in accordance with IEC1000-4-2 (IEC801-2) ♦ Monolithic TVS junctions ♦ 300W peak pulse power surge c

TVSarray Series

DESCRIPTION (300 watt) This 14 pin 8 line Bi-directional array is designed for use in applications where protection is required at the board level from voltage transients caused by electrostatic discharge (ESD) as defined in IEC 1000-4-2, electrical fast transients (EFT) per IEC 1000-4-4 and effe

Transient Voltage Suppressors Array for ESD Protection

Description The SMDAxxC-8 series of transient voltage suppressors are designed to protect components which are connected to data and transmission lines from voltage surges caused by electrostatic discharge (ESD), electrical fast transients (EFT), and lightning. Feature ◆ 300 Watts Peak Pul

Transient Voltage Suppressors Array for ESD Protection

Description The SMDAxxC-8 series of transient voltage suppressors are designed to protect components which are connected to data and transmission lines from voltage surges caused by electrostatic discharge (ESD), electrical fast transients (EFT), and lightning. Feature ◆ 300 Watts Peak Pul

Bidirectional TVS Array for Protection of Eight Lines????

Description The SMDAxxC-8 series of transient voltage suppressors are designed to protect components which are connected to data and transmission lines from voltage surges caused by electrostatic discharge (ESD), electrical fast transients (EFT), and lightning. Features ◆ Transient protect

丝印代码：AAC；Bi-directional TVS Array for High-Speed Data Line Protection

Bi-directional TVS Array for High-Speed Data Line Protection The SMDA05C transient voltage suppressor series is designed to protect equipment attached to up to four high speed communication lines from ESD, EFT, and lightning. Features: • SO−8 Package • Peak Power − 300 W 8 x 20 μS • ESD Rat

TVS ARRAY SERIES

DESCRIPTION The SMDAXXC-G series of TVS array have been designed to provide bidirectional protection for sensitive electronics from damage due to voltage transients caused by electrostatic discharge (ESD), electrical fast transients (EFT), lightning and other voltage-induced transient events. The

STANDARD CAPACITANCE TVS ARRAY

DESCRIPTION The SMDAxxCM Series are monolithic transient voltage suppressor arrays that provides board level protecton for standard TTL and MOS bus line applicatons against the damaging effects of ESD, tertary lightning and switching transients. The SMDAxxCM Series has a peak pulse power ratng of

STANDARD CAPACITANCE TVS ARRAY

FEATURES ✔ 500 Watts Peak Pulse Power per Line (tp=8/20µs) ✔ Bidirectional Configurations ✔ Monolithic Design ✔ Available in Voltage Types Ranging From: 5V to 24V ✔ Protects 5 Lines ✔ ESD Protection > 40 kilovolts APPLICATIONS ✔ RS-232, RS-422 & RS-423 Data Lines ✔ Microprocessor Base

Bidirectional TVS Array for Protection of Four Lines

Description The SMDAxxC series of TVS arrays are designed to provide bidirectional protection for sensitive electronics from damage or latch-up due to ESD, lightning and other voltage-induced transient events. Each device will protect four data or I/O lines. They are available with operating volt

Bidirectional TVS Array for Protection of Four Lines

文件：167.52 Kbytes Page：7 Pages

Bidirectional TVS Array for Protection of Four Lines

文件：167.52 Kbytes Page：7 Pages

封装/外壳：8-SOIC（0.154"，3.90mm 宽） 包装：卷带（TR）剪切带（CT） 描述：TVS DIODE 12VWM 24VC 8-SO 电路保护 TVS - 二极管

Bidirectional TVS Array for Protection of Four Lines

文件：167.52 Kbytes Page：7 Pages

TVS Array

SO-8

文件：130.12 Kbytes Page：4 Pages

Bidirectional TVS Array for Protection of Five Lines

文件：159.25 Kbytes Page：7 Pages