10-Bit Data Acquisition System for Autonomous Environmental Monitoring

INTRODUCTION The SMD1102, SMD1103 and SMD1113 each contain a 10-Bit data acquisition system (DAS) with dedicated EEPROM alarm limit storage. The three devices communicate with the host µP via a standard two-wire I2C serial interface. After initialization the SMD1102/1103/1113 can automatically

10-Bit Data Acquisition System for Autonomous Environmental Monitoring

INTRODUCTION\nThe SMD1102, SMD1103 and SMD1113 each contain a 10-Bit data acquisition system (DAS) with dedicated EEPROM alarm limit storage. The three devices communicate with the host µP via a standard two-wire I2C serial interface. After initialization the SMD1102/1103/1113 can automatically moni ● Complete Data Acquisition System\n   ♦ 10-Bit A/D Converter Resolution\n   ♦ 75µs Acquisition plus Conversion Time\n   ♦ Alarm Limits for Each Input Channel\n   ♦ Auto-Increment of Input Channels\n   ♦ Two Wire I2C Serial Data Interface\n   ♦ System Management Bus (SMBus) Compatible\n   ♦ Auto-Mon;

10-Bit Data Acquisition System for Autonomous Environmental Monitoring

INTRODUCTION The SMD1102, SMD1103 and SMD1113 each contain a 10-Bit data acquisition system (DAS) with dedicated EEPROM alarm limit storage. The three devices communicate with the host µP via a standard two-wire I2C serial interface. After initialization the SMD1102/1103/1113 can automatically

Universal Serial Bus transceiver

General description The ISP1103 is a single-chip generic Universal Serial Bus (USB) transceiver that is fully compliant with the Universal Serial Bus Specification Rev. 1.1. It allows 3.3 V USB Application Specific ICs (ASICs) and Programmable Logic Devices (PLDs) to interface with the physical l

Universal Serial Bus transceiver

General description The ISP1103 is a single-chip generic Universal Serial Bus (USB) transceiver that is fully compliant with the Universal Serial Bus Specification Rev. 1.1. It allows 3.3 V USB Application Specific ICs (ASICs) and Programmable Logic Devices (PLDs) to interface with the physical l

Universal Serial Bus transceiver

General description The ISP1103 is a single-chip generic Universal Serial Bus (USB) transceiver that is fully compliant with the Universal Serial Bus Specification Rev. 1.1. It allows 3.3 V USB Application Specific ICs (ASICs) and Programmable Logic Devices (PLDs) to interface with the physical l

Integrated Circuit General Purpose, Low Noise Preamplifier

Features: • Low Noise • Wide Operating Supply Voltage Range: VCC = 3V to 12V

DOLBY PRO LOGIC SURROUND DECODER?

文件：146.5 Kbytes Page：4 Pages