SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSORS

FEATURES * For surface mount application * Built-in strain relief * Excellent clamping capability * Low profile package * Fast response time: Typically less than 1.0ps from 0 volt to BV min. * Typical IR less than 1mA above 10V * High temperature soldering guaranteed: 260 °C / 10 seconds at

SURFACE MOUNT 1500 Watt Transient Voltage Suppressor

UNIDIRECTIONAL AND BIDIRECTIONAL SURFACE MOUNT This series of TAZ (transient absorption zeners), available in small outline surface mountable packages, is designed to optimize board space. Packaged for use with surface mount technology automated assembly equipment, these parts can be placed on pr

1500W SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR

Features • 1500W Peak Pulse Power Dissipation • 5.0V - 170V Standoff Voltages • Glass Passivated Die Construction • Uni- and Bi-Directional Versions Available • Excellent Clamping Capability • Fast Response Time • Lead Free Finish/RoHS Compliant (Note 4) Mechanical Data • Case: SMC • Cas

Surface Mount TRANSZORB Transient Voltage Suppressors

Features • Underwriters Laboratory Recognition under UL standard    for safety 497B: Isolated Loop Circuit Protection • Low profile package with built-in strain relief for    surface mounted applications • Glass passivated junction • Low incremental surge resistance, excellent clamping    c

POWER 1500Watts VOLTAGE 5.0 to 188 Volts

Features · Underwriters Laboratory recognition under UL standard for safety 497B : Isolated loop curcuit protection · Low profile package with built-in strain relief for surface mounted applications · Glass passivated junction · Low incremental surge resistance, excellent clamping capability

SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR

1500 Watt Peak Pulse Power VOLTAGE-5.0 TO 440 Volts FEATURES • For surface mounted applications in order to optimize board space • Low profile package • Built-in strain relief • Glass passivated junction • Low inductance • Excellent clamping capability • Repetition rate (duty cycle):0.01

SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR

Stand-off Voltage : 5.0 to 188V Peak Pulse Power : 1500 W FEATURES : * 1500W surge capability at 1ms * Excellent clamping capability * Low zener impedance * Fast response time : typically less then 1.0 ps from 0 volt to VBR(min.) * Typical IR less then 1mA above 10V

SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR

Stand - Off Voltage - 5.0 to 170 Volts Peak Pulse Power - 3000 Watt FEATURES ● Glass Passivated Die Construction ● Uni- and Bi-Directional Versions Available ● Excellent Clamping Capability ● Fast Response Time ● Plastic Case Material has UL Flammability Classification Rating 94V-O

SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR

Stand - Off Voltage - 5.0 to 440 Volts Peak Pulse Power - 1500 Watt FEATURES ● Glass Passivated Die Construction ● Uni- and Bi-Directional Versions Available ● Excellent Clamping Capability ● Fast Response Time ● Plastic Case Material has UL Flammability Classification Rating 9

SURFACE MOUNT BI-DIRECTIONAL TRANSIENT VOLTAGE SUPPRESSOR

FEATURES : * 1500W peak pulse power capability with a 10/1000µs waveform * Excellent clamping capability * Very fast response time * Pb / RoHS Free

Silicon Avalanche Diodes - 1500W Surface Mount Transient Voltage Supressors

FEATURES • RoHS compliant • For surface mounted applications in order to optimize board space • Low profile package • Built-in strain relief • Glass passivated junction • Low inductance • Excellent clamping capability • Repetition Rate(duty cycle): 0.05 • Fast response t

SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR

FEATURES • Glass passivated chip • 1500W peak pulse power capability with a 10/1000μs waveform, repetitive rate (duty cycle):0.01 • Low leakage • Uni and Bidirectional unit • Excellent clamping capability • Very fast response time

Transient Voltage Suppression Diodes

Transient Voltage Suppression Diodes Surface Mount – 1500W > SMCJ series

Low profile package

Features • Working peak reverse voltage range – 5.0V to 440V. • Peak power dissipation 1500W @10 x 1000 us Pulse • Low profile package. • Excellent clamping capability. • Glass passivated junction. • Fast response time: typically less than 1 ns for Uni-direction. Less than

1500Watts Surface Mount Transient Voltage Suppressor

Surface Mount TVS ■ 1500 Watt Peak Power ■ Dimension

Surface Mount TVS

Surface Mount TVS ■ 1500 Watt Peak Power ■ Dimension

1500Watts Surface Mount Transient Voltage Suppressor

Surface Mount TVS ■ 1500 Watt Peak Power ■ Dimension

SMD Transient Voltage Suppressor

1500W Surface Mount Transient Voltage Suppressors - 5.0 -440 V Features • 1500Wpeak pulse power capability at 10/1000μs waveform, repetition rate (duty cycle): 0.01 • Excellent clamping capability • low incremental surge resistance. • Fast response time from 0V to VBR, typically less than 1 p

1500Watts Surface Mount Transient Voltage Suppressor

Surface Mount TVS ■ 1500 Watt Peak Power ■ Dimension

Excellent clamping capability

Features • Working peak reverse voltage range – 5.0V to 440V. • Peak power dissipation 1500W @10 x 1000 us Pulse • Low profile package. • Excellent clamping capability. • Glass passivated junction. • Fast response time: typically less than 1 ns for Uni-direction. Less than

Surface Mount Transient Voltage Suppressors (TVS)

Description The SMCJ series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features ✦ For surface mounted applications in order to optimize board space ✦ Low leakage ✦ Uni and Bidirectional un

Transient Voltage Suppressors

FEATURES ■ For surface mounted applications in order to optimize board space. ■ Low profile package. ■ Built-in strain relief. ■ Glass passivated junction. ■ Low inductance. ■ Excellent clamping capability. ■ Repetition Rate (duty cycle): 0.05. ■ Fast response time: typical

Surface Mount Transient Voltage Suppressors (TVS)

SMCJ Series 5.0 To 440 V 1500W Description The SMCJ series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features ♦ For surface mounted applications in order to optimize board spac

1500Watts Surface Mount Transient Voltage Suppressor

Surface Mount TVS ■ 1500 Watt Peak Power ■ Dimension

SURFACE MOUNT BI-DIRECTIONAL TRANSIENT VOLTAGE SUPPRESSOR

Stand-off Voltage : 5.0 to 188V Peak Pulse Power : 1500 W FEATURES : * 1500W peak pulse power capability with a 10/1000µs waveform * Excellent clamping capability * Very fast response time * Pb / RoHS Free

Transient Voltage Suppressor 5.0 to 440 Volts 1500 Watt

Features • Lead Free Finish/Rohs Compliant (Note1) (PSuffix designates Compliant. See ordering information) • For surface mount application in order to optimize board space • Built-in strain relief • Glass passivated junction • Typical ID less than 1uA above 10V • High temperatur

1500W Transient Voltage Suppressor

DESCRIPTION TVS diodes can be used in a wide range of applications which like consumer electronic products, automotive industries, munitions, telecommunications, aerospace industries, and intelligent control systems. FEATURES ◇ Low profile package. ◇ Low inductance. ◇ Excellent clamping capab

Transient Voltage Suppressors

Features 1. Halogen-free 2. Rohs compliant 3. Typical maximum temperature coefficient 4. ΔVBR = 0.1 x VBR@25°C x ΔT 5. Glass passivated Chip junction in DO-214AB package 6. 1500W peak pulse capadility at 10×1000μs waveform, repetition rate (duty cycles):0.01 7. Fast response time:typically

5.0 To 440V 1500W Surface Mount Transient Voltage Suppressors (TVS)

Features For surface mounted applications in order to optimize board space Low leakage Uni and Bidirectional unit Glass passivated junction Low inductance Excellent clamping capability Typical IR less than 1μA above 11V 1500W Peak power capability at 10 × 1000μs waveform Repetition rate (

SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR DIODE

Features Glass Passivated Die Construction Uni- and Bi-Directional Versions Available Excellent Clamping Capability Fast Response Time Classification Rating 94V-O Plastic Case Material has UL Flammability

SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR

Glass Passivated Die Construction 1500W Peak Pulse Power Dissipation Uni- and Bi-Directional Versions Available Excellent Clamping Capability Fast Response Time Plastic Case Material has UL Flammability Classification Rating 94V-O “-A” is an AEC-Q101 qualified device This is a Pb − Free De

The SMCJ series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.

FEATURES • 1500W peak pulse power capability at 10/1000μs waveform • For surface mounted applications to optimize board space • Glass passivated chip junction • Halogen free and RoHS compliant

1500 W Transient Voltage Suppressor

1. General description 1500 W uni- and bi-directional Transient Voltage Suppressor (TVS) in a SMC Surface-Mounted Device (SMD) plastic package, designed for transient voltage protection. 2. Features and benefits • Rated peak pulse power at 10/1000 μs waveform: PPPM = 1500 W • Reverse stando

Transient Voltage Suppressors

Surface Mount TVS ■ 1500 Watt Peak Power ■ Dimension

Surface Mount Transient Voltage Suppressors

Features Excellent clamping capability Low leakage current Low capacitance High surge capability Glass passivated chip Epoxy resin package Built-in strain relief Will not fatigue RoHS Compliant Fast response time: typically less than 1.0ps from 0 Volts to VBR min Applications Teleco

Surface Mount Transient Voltage Suppressor Power 1500W

FEATURES • 1500W peak pulse power capability at 10/1000μs waveform, repetition rate (duty cycles):0.01% • Excellent clamping capability • Low incremental surge resistance • Typical IR less than 1μA when VBR min>12V • For surface mounted applications to optimize board space • Low profle p

Transient Voltage Suppressors (TVS) Data Sheet

Features For surface mounted applications in order to optimize board space Low profile package Built-in strain relief Glass passivated junction Low inductance Excellent clamping capability 1500W peak pulse power capability at 10/1000μs waveform, repetition rate (duty cycle): 0.01% Fast

TRANSIENT VOLTAGE SUPPRESSOR

Features · For surface mounted applications in order to optimize board space · Low profile space · Very fast response time · Low inductance · Excellent clamping capability · 1500W peak pulse power capability with a 10/1000 μs waveform · Meets MSL level 1, per J-STD-020 · Component in acc

5V-188V 1500W

FEATURES * 1500W surge capability at 1ms * Excellent clamping capability * Low zener impedance * Fast response time : typically less then 1.0 ps from 0 volt to VBR(min.) * Typical IR less then 1mA above 10V

5V-188V 1500W

FEATURES * 1500W surge capability at 1ms * Excellent clamping capability * Low zener impedance * Fast response time : typically less then 1.0 ps from 0 volt to VBR(min.) * Typical IR less then 1mA above 10V

Transient Voltage Suppressors (TVS)

Features ■ For surface mounted applications in order to optimize board space ■ Low profile package ■ Built-in strain relief ■ Glass passivated junction ■ Low inductance ■ Excellent clamping capability ■ 1500W peak pulse power capability at 10/1000μs waveform, repetition rate (duty cycle): 0

SURFACE MOUNT TRANSIENT VOLTAGE SUPPESSOR DIODE

文件：1.589137 Mbytes Page：5 Pages

1500W 7V TVS transient suppressor diode

文件：840.061 Kbytes Page：5 Pages

1500W Surface Mount Transient Voltage Suppressor

文件：190.42 Kbytes Page：4 Pages

SMCJ Transient Voltage Suppressor Diode Series

文件：359.53 Kbytes Page：5 Pages

DEVICES FOR BIPOLAR APPLICATIONS

文件：127.34 Kbytes Page：5 Pages

SURFACE MOUNT UNIDIRECTIONAL AND BIDIRECTIONAL TRANSIENT VOLTAGE SUPPRESSORS

文件：115.95 Kbytes Page：4 Pages

Transient Voltage Suppressors

文件：431.95 Kbytes Page：5 Pages

Surface Mount Transient Voltage Suppressors

文件：1.59199 Mbytes Page：5 Pages

Transient Voltage Suppressors

文件：541.13 Kbytes Page：3 Pages

SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR STAND-OFF VOLTAGE - 5.0 TO 440 Volts

文件：710.96 Kbytes Page：3 Pages

GLASS PASSIVATED SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR

文件：143.6 Kbytes Page：3 Pages

1500W Surface Mount Transient Voltage Suppressor

文件：219.31 Kbytes Page：6 Pages

1500W Peak Power Surface Mount TVS

文件：430.5 Kbytes Page：4 Pages

Surface Mount Transient Voltage Suppressors (TVS)

文件：3.90527 Mbytes Page：56 Pages

TRANSIENT VOLTAGE SUPPRESSOR

文件：139.86 Kbytes Page：4 Pages

Surface Mount Unidirectional and Bidirectional Transient Voltage Suppressors

文件：589.74 Kbytes Page：5 Pages

1500W Transient Voltage Suppressors

文件：420.59 Kbytes Page：5 Pages

SMCJ Transient Voltage Suppressor Diode Series

文件：1.12322 Mbytes Page：5 Pages

1500W Transient Voltage Suppressor

文件：598.9 Kbytes Page：7 Pages