1.5 Watt Surface Mount Silicon Zener Diodes

Features ● Surface Mount Application ● 3.3 thru 51 Volt Voltage Range ● Low Inductance, Low Profile Mounting ● Glass Passivated Junction ● Lead Free Finish/Rohs Compliant (Note1) (PSuffix designates Compliant. See ordering information)

1.5 Watt Surface Mount Silicon Zener Diodes

Features • Halogen free available upon request by adding suffix -HF • Surface Mount Application • 3.3 thru 200 Volt Voltage Range • Low Inductance,Low Profile Mounting • Glass Passivated Junction • Lead Free Finish/Rohs Compliant (Note1) (PSuffix designates Compliant. See ordering info

Surface mount zener diode

FEATURES ● Complete voltage range 3.3 to 200 V ● Withstands large surge stresses ● Available on tape and reel ● High surge current rating

Zener Diodes

VZ : 3.3 -- 200 V POWER DISSIPATION: 3.0 W Features ◇ Complete voltage range 3.3 to 200 V ◇ Withstands large surge stresses ◇ Available on tape and reel ◇ High surge current rating

Zener Diode Single 2-Pin 3.9V, 5% Tolerance , 7.5Ohm, 2000mW SMB T/R

The SMBJ5913-5956B or SMBG5913-5956B series of surface mount 2.0 watt Zeners provides voltage regulation in a selection from 3.3 to 200 volts with different tolerances as identified by suffix letter on the part number. This series is equivalent to the JEDEC registered 1N5913 thru 1N5956B with identi Surface mount equivalent to 1N5913 to 1N5956B\n Ideal for high-density and low-profile mounting\n Zener voltage available 3.3V to 200V\n Standard voltage tolerances are plus/minus 5% with B suffix and 10 % with A suffix identification\n Tight tolerances available in plus or minus 2% or 1;

1.5W SILICON SURFACE MOUNT ZENER DIODES

文件：184.1 Kbytes Page：2 Pages

Zener Diode Single 2-Pin 3.9V, 5% Tolerance , 7.5Ohm, 2000mW SMB T/R

The SMBJ5913-5956B or SMBG5913-5956B series of surface mount 2.0 watt Zeners provides voltage regulation in a selection from 3.3 to 200 volts with different tolerances as identified by suffix letter on the part number. This series is equivalent to the JEDEC registered 1N5913 thru 1N5956B with identi Surface mount equivalent to 1N5913 to 1N5956B\n Ideal for high-density and low-profile mounting\n Zener voltage available 3.3V to 200V\n Standard voltage tolerances are plus/minus 5% with B suffix and 10 % with A suffix identification\n Tight tolerances available in plus or minus 2% or 1;

稳压二极管 Zener Voltage Regulator Diode

封装/外壳：DO-214AA，SMB 包装：散装 描述：DIODE ZENER 3.9V 2W SMBJ 分立半导体产品 二极管 - 齐纳 - 单

封装/外壳：DO-214AA，SMB 包装：卷带（TR） 描述：DIODE ZENER 3.9V 2W SMBJ 分立半导体产品 二极管 - 齐纳 - 单

1.5W SILICON SURFACE MOUNT ZENER DIODES

文件：184.1 Kbytes Page：2 Pages

Dual PCI 2.2 Hot-Swap Controllers

General Description The MAX5915/MAX5915A/MAX5916/MAX5916A dual PCI 2.2 hot-swap controllers allow for safe insertion and removal of two PCI cards into live PCI slots or backplanes by limiting the inrush current at startup. After startup, these devices provide protection against short-circuit, ove

Silicon Power Rectifier Diode, 20 Amp

Description and Features: The NTE5844, NTE5845, and NTE5912 through NTE5933 are low power general purpose rectifier diodes in a DO4 type package designed for battery chargers, converters, power supplies, and machine tool controls. Features: • High Surge Current Capability • High Volt

.5-1.0 WATT DUAL-IN-LINE REGULATED DC/DC CONVERTER

DESCRIPTION The PWR59XX Series offers an extensive selection of input and output voltage combinations to choose from, including a 9V output for Cheapernet local area networking. Both single and dual output voltages are available. These miniature, regulated DC/DC converters come in a 24-pin dual-i

4-channel BTL driver for CD players

文件：148.06 Kbytes Page：9 Pages