TRANSIENT VOLTAGE SUPPRESSORS

Features ● For surface mounted applications in order to optimize board space ● Low profile space ● Glass passivated chip ● Low inductance ● Excellent clamping capability ● Very fast response time ● Typical ID less than 1µA at VWM ● 400 W peak pulse power capability with a 10/1000 µs wavefo

SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR

Stand-off Voltage: 5.0-440 Volts Peak pulse power: 400 Watts FEATURE ♦ For surface mounted applications in order to optimize board space ♦ Low profile package ♦ Built-in strain relief ♦ Glass passivated junction ♦ Low inductance ♦ Excellent clamping capability ♦ 400W peak

Surface Mount TRANSZORB Transient Voltage Suppressors

FEATURES • Low profile package • Ideal for automated placement • Glass passivated chip junction • Available in uni-directional and bi-directional • 400 W peak pulse power capability with a 10/1000 µs waveform, repetitive rate (duty cycle): 0.01 (300 W above 78 V) • Excellent clamping capabi

Transient Voltage Suppressors

FEATURES ✧ For surface mounted applications in order to optimize board space. ✧ Low profile package. ✧ Built-in strain relief. ✧ Glass passivated junction. ✧ Low inductance. ✧ Excellent clamping capability. ✧ Repetition Rate (duty cycle): 0.01. ✧ Fast response time: typically less than 1.0

Surface Mount Transient Voltage Suppressors (TVS)

Description The SMAJ series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features ✦ For surface mounted applications in order to optimize board space ✦ Low leakage ✦ Uni and Bidirectional un

Surface Mount Transient Voltage Suppressors (TVS)

Description The SMAJ series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features ✦ For surface mounted applications in order to optimize board space ✦ Low leakage ✦ Uni and Bidirectional un

SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR

FEATURES  For surface mounted applications in order to optimize board space  Typical maximum temperature coefficient △VBR=0.1xVBR@25°C x△T  Low profile package  Built-in strain relief  Glass passivated junction  Excellent clamping capability  Repetition Rate (duty cycle):0.01  Fast

SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR

Glass Passivated Die Construction 400W Peak Pulse Power Dissipation 5.0V- 300V Standoff Voltage Uni- and Bi-Directional Versions Available Excellent Clamping Capability Fast Response Time Plastic Case Material has UL Flammability Classification Rating 94V-O ROHS Compliant All SMC Parts ar

SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR DIODE

Features Glass Passivated Die Construction Uni- and Bi-Directional Versions Available Excellent Clamping Capability Fast Response Time Plastic Material: UL Flammability Classification Rating 94V-0

400 W Transient Voltage Suppressor

1. General description 400 W uni- and bi-directional Transient Voltage Suppressor (TVS) in a SMA Surface-Mounted Device (SMD) plastic package, designed for transient voltage protection. 2. Features and benefits • Rated peak pulse power at 10/1000 μs waveform: PPPM = 400 W • Reverse standoff

Surface Mount Transient Voltage Suppressors

Features Excellent clamping capability Low leakage current Low capacitance High surge capability Glass passivated chip Epoxy resin package Built-in strain relief Will not fatigue RoHS Compliant Fast response time: typically less than 1.0ps from 0 Volts to VBR min Applications Teleco

Transient Voltage Suppressors (TVS) Data Sheet

Features For surface mounted applications in order to optimize board space Low profile package Glass passivated junction Low inductance Excellent clamping capability 400W peak pulse power capability at 10/1000μs waveform, repetition rate (duty cycle): 0.01% Fast response time Typical

Transient Voltage Suppressors

Features Glass passivated chip 400 W peak pulse power capability with a 10/1000 us waveform, repetitive rate (duty cycle):0.01 % Low leakage Uni and Bidirectional unit Excellent clamping capability Very fast response time RoHS compliant

3.3 To 440V 400W Surface Mount Transient Voltage Suppressors (TVS)

Features For surface mounted applications in order to optimize board space Low leakage Uni and Bidirectional unit Glass passivated junction Low inductance Excellent clamping capability Typical IR less than 1μA above 10V 400W Peak power capability at 10 × 1000μs waveform Repetition rate (d

Surface-Mount TRANSZORB® Transient Voltage Suppressors

FEATURES • Low profile package • Ideal for automated placement • Glass passivated chip junction • Available in unidirectional and bidirectional • 400 W peak pulse power capability with a 10/1000 μs waveform, repetitive rate (duty cycle): 0.01 % (300 W above 78 V) • Excellent clamping c

TRANSIENT VOLTAGE SUPPRESSOR 400 WATT PEAK POWER

DESCRIPTION The SMAJ series support both Uni and Bi direction. FEATURES ⚫ Availabl e in SM A P ackage

5.0V-188V 400W

FEATURES • Low profile package • Ideal for automated placement • Glass passivated chip junction • Available in uni-directional and bi-directional • 400 W peak pulse power capability with a 10/1000 μs waveform, repetitive rate (duty cycle): 0.01 % (300 W above 78 V) • Excellent clamping

Transient Voltage Suppressor Diodes

Features For surface mounted applications in order to optimize board space. Low profile package Glass passivated junction Low inductance Plastic package has Underwriters Laboratory Flammability

SMAJ Series 400W Transient Voltage Suppressor

DESCRIPTION: TVS diodes can be used in a wide range of applications which like consumer electronic products, automotive industries, munitions, telecommunications, aerospace industries, and intelligent control systems. iodes FEATURES: Glass passivated or planar Excellent clamping capabili

SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR

FEATURES: * 400W peak pulse power capability with a 10/1000μjs waveform * Optimized for LAN protection applications * Low clamping * Very fast response time * Pb/RoHSFree

Transient Voltage Suppressors(TVS)

Features ■ For surface mounted applications in order to optimize board space ■ Low profile package ■ Glass passivated junction ■ Low inductance ■ Excellent clamping capability ■ 400W peak pulse power capability at 10/1000μs waveform, repetition rate (duty cycle): 0.01% ■ Fast response

400 Watt Transient Voltage Suppressors 5.0 to 440 Volts

Features • For Surface Mount Applications • Unidirectional And Bidirectional • Low Inductance • High Temp Soldering: 250°C for 10 Seconds At Terminals • For Bidirectional Devices Add “C” To The Suffix Of The Part Number: i.e.SMAJ5.0C or P4SMAJ5.0CA for 5% Tolerance • SMAJ5.0~SMAJ440CA c

400W SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR

Features • 400W Peak Pulse Power Dissipation • 5.0V - 170V Standoff Voltages • Glass Passivated Die Construction • Uni- and Bi-Directional Versions Available • Excellent Clamping Capability • Fast Response Time • Plastic Material: UL Flammability Classification Rating 94V-0

SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSORS

[Byte] FEATURES * For surface mount application * Built-in strain relief * Excellent clamping capability * Low profile package * Fast response time: Typically less than 1.0ps from 0 volt to BV min. * Typical IR less than 1mA above 10V * High temperature soldering guaranteed: 260 °C / 10 se

400W SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR

Features • 400W Peak Pulse Power Dissipation • Glass Passivated Die Construction • Unidirectional and Bidirectional Versions Available • Excellent Clamping Capability • Fast Response Time • Lead Free Finish/RoHS Compliant (Note 1) • Green Molding Compound (No Halogen and Antimony) (Note 2)

Silicon Avalanche Diodes - 400W Surface Mount Transient Voltage Supressors

400W Surface Mount Transient Voltage Supressors FEATURES • RoHScompliant • For surface mounted applications in order to optimize board space • Low profile package • Built-in strain relief • Glass passivated junction • Low inductance • Excellent clamping capability • Repetition Rate (duty

POWER 400WATTS VOLTAGE 5.0 TO 188 VOLTS

Features • Plastic package has Underwriters Laboratory flammability classification 94V-0 • Optimized for LAN protection applications • Ideal for ESD protection of data lines in accordance with IEC 1000-4-2 (IEC801-2) • Ideal for EFT protection of data lines in accordance with IEC 1000-4-4

Surface Mount Transient Voltage Suppressor

FEATURES - Low profile package - Ideal for automated placement - Glass passivated junction - Built-in strain relief - Excellent clamping capability - Halogen-free according to IEC 61249-2-21 definition - Fast response time: Typically less than 1.0ps from 0 volt to BV min - Typical IR less

400W Surface Mount Transient Voltage Suppressors

Feature: * 400 Watt Peak Power Dissipation * Glass Passivated Die Construction * Excellent Clamping Capability Fast Response Time * Plastic Material Has UL Flammability Classification Rating 94V-O

SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR

VOLTAGE RANGE 5.0 to 170 Volts CURRENT 300 Watts Peak Power FEATURE * For surface mounted applications * Low profile package * Built-in strain relief * Glass passivated junction * Excellent clamping capability * Fast response time: typically less than 1.0ps from 0 volts to BV min. * Ty

5.0V to 170V SMD TRANSIENT VOLTAGE SUPPRESSORS

Features ■ 400 WATT PEAK POWER PROTECTION ■ EXCELLENT CLAMPING CAPABILITY ■ FAST RESPONSE TIME ■ TYPICAL IR

TRANSIENT VOLTAGE SUPPRESSOR

FEATURES ● Plastic package has underwriters laboratory flammability classification 94V-0 ● Optimized for LAN protection applications ● Low profile package with built-in strain relief for surface mounted applications ● Low incremental surge resistance, excellent clamping capability ● 400W peak

SURFACE MOUNT TRANSIERT VOLTAGE SUPPRESSOR

Features ● Low profile package ● Ideal for automated placement ● Glass passivated chip junction ● High forward surge capability ● Available in uni-directional 400 W peak pulse power capability with a 10/1000 μs waveform ● Meets MSL level 1, per J-STD-020, LF maximum peak of 260 °C

SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSORS

FEATURES * For surface mount application * Built-in strain relief * Excellent clamping capability * Low profile package * Fast response time: Typically less than 1.0ps from 0 volt to BV min. * Typical IR less than 1 A above 10V * High temperature soldering guaranteed: 260 °C / 10 seconds at

SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR

Stand-off Voltage : 5.0 to 188V Peak Pulse Power : 400 W FEATURES : * 400W surge capability at 1ms * Optimized for LAN protection applications * Excellent clamping capability * Low zener impedance * Fast response time : typically less then 1.0 ps from 0 volt to VBR(min.) * Typica

SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR

VOLTAGE-5.0 TO 170 Volts 400 Watt Peak Pulse Power FEATURES • For surface mounted applications in order to optimize board space • Low profile package • Built-in strain relief • Glass passivated junction • Low inductance • Excellent clamping capability • Repetition rate (duty cycle):0.01 •

Surface Mount Transient Voltage Suppressors

Peak Pulse Power 400W Stand Off Voltage 5.0 to 440V Features ♦ Plastic package has Underwriters Laboratory Flammability Classification 94V-0 ♦ Optimized for LAN protection applications ♦ Ideal for ESD protection of data lines in accordance with IEC 1000-4-2 (IEC801-2) ♦ Ideal for

SURFACE MOUNT TVS DIODE Electrical Characteristics, 33 to 170 Volts

SURFACE MOUNT TVS DIODE Electrical Characteristics, 33 to 170 Volts TRANSIENT VOLTAGE SUPPRESSOR DIODE Operating Teperature: -55°c to 150°c

Transient Voltage Suppressors

PRODUCT SUMMARY Stand-off Voltage ratings from 5.0V to 440V Peak pulse power 400W in SMA surface-mount package FEATURES • Plastic package has Underwriters Laboratory Flammability Classification 94V-0 • Optimized for LAN protection applications • Ideal for ESD protection

SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR

Stand-off Voltage: 5.0-170 Volts Peak pulse power: 300 Watts FEATURE ◇ Optimzed for LAN protection applications ◇ Ideal for ESD protection of data lines in accordance with IEC 1000-4-2(IEC801-2) ◇ Ideal for EFT protection of data lines in accordance with IEC1000-4-4(IEC801-2) ◇ Plasti

SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR

Stand - Off Voltage - 5.0 to 170 Volts Peak Pulse Power - 400 Watt FEATURES ● Glass Passivated Die Construction ● Uni- and Bi-Directional Versions Available ● Excellent Clamping Capability ● Fast Response Time ● Plastic Case Material has UL Flammability Classification Rating 94V-O

400 Watt Transient Voltage Suppressors 5.0 to 440 Volts

400 Watt Transient Voltage Suppressors 5.0 to 440 Volts Features • For Surface Mount Applications • Unidirectional And Bidirectional • Low Inductance • High Temp Soldering: 260°C for 10 Seconds At Terminals • For Bidirectional Devices Add “C” To The Suffix of The Part Number: i

Surface Mount Transient Voltage Suppressors (TVS)

Description The SMAJ series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features ✦ For surface mounted applications in order to optimize board space ✦ Low leakage ✦ Uni and Bidirectional un

Surface Mount Transient Voltage Suppressors (TVS)

Description The SMAJ series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features ♦ For surface mounted applications in order to optimize board space ♦ Low leakage ♦ Uni and Bidi

Surface Mount Transient Voltage Suppressors (TVS)

Description The SMAJ series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features ♦ For surface mounted applications in order to optimize board space ♦ Low leakage ♦ Uni and Bidi

Surface Mount Transient Voltage Suppressors (TVS)

Description The SMAJ series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features ♦ For surface mounted applications in order to optimize board space ♦ Low leakage ♦ Uni and Bidi

Surface Mount Transient Voltage Suppressors (TVS)

Description The SMAJ series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features ♦ For surface mounted applications in order to optimize board space ♦ Low leakage ♦ Uni and Bidi

Surface Mount Transient Voltage Suppressors (TVS)

Description The SMAJ series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features ♦ For surface mounted applications in order to optimize board space ♦ Low leakage ♦ Uni and Bidi

Surface Mount Transient Voltage Suppressors (TVS)

Description The SMAJ series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features ♦ For surface mounted applications in order to optimize board space ♦ Low leakage ♦ Uni and Bidi

Surface Mount Transient Voltage Suppressors (TVS)

Description The SMAJ series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features ♦ For surface mounted applications in order to optimize board space ♦ Low leakage ♦ Uni and Bidi

Surface Mount Transient Voltage Suppressors (TVS)

Description The SMAJ series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features ♦ For surface mounted applications in order to optimize board space ♦ Low leakage ♦ Uni and Bidi

Surface Mount Transient Voltage Suppressors (TVS)

Description The SMAJ series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features ✦ For surface mounted applications in order to optimize board space ✦ Low leakage ✦ Uni and Bidirectional un

Surface Mount Transient Voltage Suppressors (TVS)

Description The SMAJ series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features ✦ For surface mounted applications in order to optimize board space ✦ Low leakage ✦ Uni and Bidirectional un

Surface Mount Transient Voltage Suppressors (TVS)

Description The SMAJ series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features ♦ For surface mounted applications in order to optimize board space ♦ Low leakage ♦ Uni and Bidi

Surface Mount TRANSZORB Transient Voltage Suppressors

FEATURES • Low profile package • Ideal for automated placement • Glass passivated chip junction • Available in uni-directional and bi-directional • 400 W peak pulse power capability with a 10/1000 µs waveform, repetitive rate (duty cycle): 0.01 (300 W above 78 V) • Excellent clamping capabi

400W Surface Mount Transient Voltage Suppressor

Features ● Stand-off voltage from 5.0 to 170 volts ● 400W Peak Pulse Power capability on 10/1000 µs waveform repetition rate(duty cycle): 0.01 ● Ideal for ESD protection of data lines in accordance with IEC 1000-4-2 (IEC801-2) ● Ideal for EFT protection of data lines in accordance wi

Surface Mount TRANSZORB® Transient Voltage Suppressors

FEATURES • Low profile package • Ideal for automated placement • Glass passivated chip junction • Available in uni-directional and bi-directional • 400 W peak pulse power capability with a 10/1000 µs waveform, repetitive rate (duty cycle): 0.01 (300 W above 78 V) • Excellent clamping capabi

SURFACE MOUNT UNIDIRECTIONAL AND BIDIRECTIONAL TRANSIENT VOLTAGE SUPPRESSORS

REVERSE VOLTAGE - 5.0 to 170 Volts POWER DISSIPATION - 400 Watts FEATURES ● Rating to 200V VBR ● For surface mounted applications ● Reliable low cost construction utilizing molded plastic technique ● Plastic material has UL recognition 94V-0 ● Typical IR less than 1µA above 10V ●

SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR

WORKING VOLTAGE:5.0 to 440V PEAK PULSE POWER:400W FEATURES • Glass passivated chip • 400W peak pulse power capability woth a 10/1000μ s waveform, repetitive rate (duty cycle):0.01 • Low leakage • Uni and Bidirectional unit • Excellent clamping capability • Very fast response time

Surface Mount Transient Voltage Suppressors (TVS)

Description The SMAJ series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features ✦ For surface mounted applications in order to optimize board space ✦ Low leakage ✦ Uni and Bidirectional un