XTR111 Demonstration Fixture Users Guide

2 Hardware Features This section describes the hardware features found on the XTR111EVM. 2.1 XTR111EVM The XTR111EVM is used for the basic functional evaluation of the XTR111. The EVM provides the following features: • Easy handling of the small DFN package. The DFN device is already soldered

Transient Voltage Suppressors(TVS)

Features ■ For surface mounted applications in order to optimize board space ■ Low profile package ■ Glass passivated junction ■ Low inductance ■ Excellent clamping capability ■ 400W peak pulse power capability at 10/1000μs waveform, repetition rate (duty cycle): 0.01% ■ Fast response

400W SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR

Features • 400W Peak Pulse Power Dissipation • 5.0V - 170V Standoff Voltages • Glass Passivated Die Construction • Uni- and Bi-Directional Versions Available • Excellent Clamping Capability • Fast Response Time • Plastic Material: UL Flammability Classification Rating 94V-0

400W SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR

Features • 400W Peak Pulse Power Dissipation • Glass Passivated Die Construction • Unidirectional and Bidirectional Versions Available • Excellent Clamping Capability • Fast Response Time • Lead Free Finish/RoHS Compliant (Note 1) • Green Molding Compound (No Halogen and Antimony) (Note 2)

400W SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR

Features • 400W Peak Pulse Power Dissipation • 5.0V - 170V Standoff Voltages • Glass Passivated Die Construction • Uni- and Bi-Directional Versions Available • Excellent Clamping Capability • Fast Response Time • Plastic Material: UL Flammability Classification Rating 94V-0

400W SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR

Features • 400W Peak Pulse Power Dissipation • 5.0V - 170V Standoff Voltages • Glass Passivated Die Construction • Uni- and Bi-Directional Versions Available • Excellent Clamping Capability • Fast Response Time • Plastic Material: UL Flammability Classification Rating 94V-0

400W SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR

Features • 400W Peak Pulse Power Dissipation • 5.0V - 170V Standoff Voltages • Glass Passivated Die Construction • Uni- and Bi-Directional Versions Available • Excellent Clamping Capability • Fast Response Time • Plastic Material: UL Flammability Classification Rating 94V-0

400W SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR

Features • 400W Peak Pulse Power Dissipation • 5.0V - 170V Standoff Voltages • Glass Passivated Die Construction • Uni- and Bi-Directional Versions Available • Excellent Clamping Capability • Fast Response Time • Plastic Material: UL Flammability Classification Rating 94V-0

400W SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR

Features • 400W Peak Pulse Power Dissipation • 5.0V - 170V Standoff Voltages • Glass Passivated Die Construction • Uni- and Bi-Directional Versions Available • Excellent Clamping Capability • Fast Response Time • Plastic Material: UL Flammability Classification Rating 94V-0

400W Peak Pulse Power Dissipation

Features • 400W Peak Pulse Power Dissipation • 5.0V - 170V Standoff Voltages • Glass Passivated Die Construction • Uni- and Bi-Directional Versions Available • Excellent Clamping Capability • Fast Response Time • Plastic Material: UL Flammability Classification Rating 94V-0

400W SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR

Features • 400W Peak Pulse Power Dissipation • 5.0V - 170V Standoff Voltages • Glass Passivated Die Construction • Uni- and Bi-Directional Versions Available • Excellent Clamping Capability • Fast Response Time • Plastic Material: UL Flammability Classification Rating 94V-0

400W SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR

Features • 400W Peak Pulse Power Dissipation • 5.0V - 170V Standoff Voltages • Glass Passivated Die Construction • Uni- and Bi-Directional Versions Available • Excellent Clamping Capability • Fast Response Time • Plastic Material: UL Flammability Classification Rating 94V-0

丝印代码：YR；Silicon Avalanche Diodes - 400W Surface Mount Transient Voltage Supressors

400W Surface Mount Transient Voltage Supressors FEATURES • RoHScompliant • For surface mounted applications in order to optimize board space • Low profile package • Built-in strain relief • Glass passivated junction • Low inductance • Excellent clamping capability • Repetition Rate (duty

400 Watt Transient Voltage Suppressors 5.0 to 440 Volts

Features • For Surface Mount Applications • Unidirectional And Bidirectional • Low Inductance • High Temp Soldering: 250°C for 10 Seconds At Terminals • For Bidirectional Devices Add “C” To The Suffix Of The Part Number: i.e.SMAJ5.0C or P4SMAJ5.0CA for 5% Tolerance • SMAJ5.0~SMAJ440CA c

SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR

VOLTAGE-5.0 TO 170 Volts 400 Watt Peak Pulse Power FEATURES • For surface mounted applications in order to optimize board space • Low profile package • Built-in strain relief • Glass passivated junction • Low inductance • Excellent clamping capability • Repetition rate (duty cycle):0.01 •

Unidirectional and Bidirectional Surface Mount Transient Voltage Suppressor

Features • Peak power dissipation 400W @10 x 1000μs Pulse • Low profile package. • Excellent clamping capability. • Glass passivated junction. • Fast response time: typically less than 1ps from 0 Volts to BV min • Typical IR less than 1uA when VBR min above 12V. • IEC 61000-4-2 ESD 30KV(Air

400W Surface Mount Transient Voltage Suppressors

Feature: * 400 Watt Peak Power Dissipation * Glass Passivated Die Construction * Excellent Clamping Capability Fast Response Time * Plastic Material Has UL Flammability Classification Rating 94V-O

SURFACE MOUNT TRANSIENT VOLAGE SUPPESSOR DIODE

VOLTAGE RANGE: 5.0 - 440 V POWER: 400Watts Features • Glass Passivated Die Construction • Uni- and Bi-Directional Versions Available • Excellent Clamping Capability • Fast Response Time • Plastic Material: UL Flammability Classification Rating 94V-0

丝印代码：VR；SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR DIODE

Features Glass Passivated Die Construction Uni- and Bi-Directional Versions Available Excellent Clamping Capability Fast Response Time Plastic Material: UL Flammability Classification Rating 94V-0

丝印代码：YR；SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR

FEATURES  For surface mounted applications in order to optimize board space  Typical maximum temperature coefficient △VBR=0.1xVBR@25°C x△T  Low profile package  Built-in strain relief  Glass passivated junction  Excellent clamping capability  Repetition Rate (duty cycle):0.01  Fast

400 Watt Transient Voltage Suppressors 5.0 to 440 Volts

400 Watt Transient Voltage Suppressors 5.0 to 440 Volts Features • For Surface Mount Applications • Unidirectional And Bidirectional • Low Inductance • High Temp Soldering: 260°C for 10 Seconds At Terminals • For Bidirectional Devices Add “C” To The Suffix of The Part Number: i

SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSORS

VOLTAGE RANGE 5.0 to 170 Volts 400 Watts Peak Power FEATURES * For surface mount application * Built-in strain relief * Excellent clamping capability * Low profile package * Fast response time: Typically less than 1.0ps from 0 volt to BV min. * Typical IR less than 1mA above 10V * High te

SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR

Stand - Off Voltage - 5.0 to 170 Volts Peak Pulse Power - 400 Watt FEATURES ● Glass Passivated Die Construction ● Uni- and Bi-Directional Versions Available ● Excellent Clamping Capability ● Fast Response Time ● Plastic Case Material has UL Flammability Classification Rating 94V-O

SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSORS

[Byte] FEATURES * For surface mount application * Built-in strain relief * Excellent clamping capability * Low profile package * Fast response time: Typically less than 1.0ps from 0 volt to BV min. * Typical IR less than 1mA above 10V * High temperature soldering guaranteed: 260 °C / 10 se

SMD Transient Voltage Suppressor

400W Surface Mount Transient Voltage Suppressors- 5.0V- 440V FEATURES • 400W peak pulse power capability with a 10/1000μs waveform, repetition rate (duty cycle) : 0.01. • Low profile surface mounted applications in order to optimize board space. • Excellent clamping capability • Low increment

SURFACE MOUNT UNIDIRECTIONAL AND BIDIRECTIONAL TRANSIENT VOLTAGE SUPPRESSORS

REVERSE VOLTAGE - 5.0 to 170 Volts POWER DISSIPATION - 400 Watts FEATURES ● Rating to 200V VBR ● For surface mounted applications ● Reliable low cost construction utilizing molded plastic technique ● Plastic material has UL recognition 94V-0 ● Typical IR less than 1µA above 10V ●

SMAJ Series 400W Transient Voltage Suppressor

DESCRIPTION: TVS diodes can be used in a wide range of applications which like consumer electronic products, automotive industries, munitions, telecommunications, aerospace industries, and intelligent control systems. iodes FEATURES: Glass passivated or planar Excellent clamping capabili

SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR

WORKING VOLTAGE:5.0 to 440V PEAK PULSE POWER:400W FEATURES • Glass passivated chip • 400W peak pulse power capability woth a 10/1000μ s waveform, repetitive rate (duty cycle):0.01 • Low leakage • Uni and Bidirectional unit • Excellent clamping capability • Very fast response time

400W Peak Power Surface Mount TVS

FEATURES * For surface mount application * Built-in strain relief * Excellent clamping capability * Low profile package * Fast response time: Typically less than 1.0ps from 0 volt to BV min. * Typical IR less than 1mA above 10V * High temperature soldering guaranteed: 260 °C / 10 seconds at

丝印代码：26CA；Transient Voltage Suppressors (TVS) Data Sheet

Features For surface mounted applications in order to optimize board space Low profile package Glass passivated junction Low inductance Excellent clamping capability 400W peak pulse power capability at 10/1000μs waveform, repetition rate (duty cycle): 0.01% Fast response time Typical

SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR

Stand-off Voltage : 5.0 to 188V Peak Pulse Power : 400 W FEATURES : * 400W surge capability at 1ms * Optimized for LAN protection applications * Excellent clamping capability * Low zener impedance * Fast response time : typically less then 1.0 ps from 0 volt to VBR(min.) * Typica

400W Surface Mount Transient Voltage Suppressor

Features ● Stand-off voltage from 5.0 to 170 volts ● 400W Peak Pulse Power capability on 10/1000 µs waveform repetition rate(duty cycle): 0.01 ● Ideal for ESD protection of data lines in accordance with IEC 1000-4-2 (IEC801-2) ● Ideal for EFT protection of data lines in accordance wi

丝印代码：YQ；Transient Voltage Suppressors

Features Glass passivated chip 400 W peak pulse power capability with a 10/1000 us waveform, repetitive rate (duty cycle):0.01 Low leakage Uni and Bidirectional unit Excellent clamping capability Very fast response time RoHS compliant

大功率TVS

大功率浪涌TVS产品旨在保护电子电路免受EOS（10/1000µs）的影响，如雷击和电感负载开关。该设计还可用于防止电子设备因EOS（电气过度应力）和雷击而发生故障或损坏。其工业标准测试条件为 IEC61000-4-5 (8/20µs)。

Excellent clamping capability

Features ● Peak power dissipation 400W @10 x 1000 us Pulse ● Low profile package. ● Excellent clamping capability. ● Glass passivated junction. ● Fast response time: typically less than 1ps from 0 Volts to BV min ● Typical IR less than 1uA when VBR min above 12V. ● IEC 61000-4-2 ESD 30KV(Ai

Transient Voltage Suppressors (TVS) Data Sheet

Features ■ For surface mounted applications in order to optimize board space ■ Low profile package ■ Glass passivated junction ■ Low inductance ■ Excellent clamping capability ■ 400W peak pulse power capability at 10/1000μs waveform, repetition rate (duty cycle): 0.01% ■ Fast response

丝印代码：BH6；400 W Transient Voltage Suppressor

1. General description 400 W uni- and bi-directional Transient Voltage Suppressor (TVS) in a SMA Surface-Mounted Device (SMD) plastic package, designed for transient voltage protection. 2. Features and benefits • Rated peak pulse power at 10/1000 μs waveform: PPPM = 400 W • Reverse standoff

Surface Mount Transient Voltage Suppressors (TVS)

Description The SMAJ series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features ✦ For surface mounted applications in order to optimize board space ✦ Low leakage ✦ Uni and Bidirectional un

丝印代码：YR；3.3 To 440V 400W Surface Mount Transient Voltage Suppressors (TVS)

Features For surface mounted applications in order to optimize board space Low leakage Uni and Bidirectional unit Glass passivated junction Low inductance Excellent clamping capability Typical IR less than 1μA above 10V 400W Peak power capability at 10 × 1000μs waveform Repetition rate (d

Transient Voltage Suppressors

FEATURES ✧ For surface mounted applications in order to optimize board space. ✧ Low profile package. ✧ Built-in strain relief. ✧ Glass passivated junction. ✧ Low inductance. ✧ Excellent clamping capability. ✧ Repetition Rate (duty cycle): 0.01. ✧ Fast response time: typically less than 1.0

丝印代码：VR；SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR

Glass Passivated Die Construction 400W Peak Pulse Power Dissipation 5.0V- 300V Standoff Voltage Uni- and Bi-Directional Versions Available Excellent Clamping Capability Fast Response Time Plastic Case Material has UL Flammability Classification Rating 94V-O ROHS Compliant All SMC Parts ar

5.0V-188V 400W

FEATURES • Low profile package • Ideal for automated placement • Glass passivated chip junction • Available in uni-directional and bi-directional • 400 W peak pulse power capability with a 10/1000 μs waveform, repetitive rate (duty cycle): 0.01 (300 W above 78 V) • Excellent clamping capa

TRANSIENT VOLTAGE SUPPRESSOR 400 WATT PEAK POWER

DESCRIPTION The SMAJ series support both Uni and Bi-direction. FEATURES  Available in SMA Package

TRANSIENT VOLTAGE SUPPRESSOR 400 WATT PEAK POWER

DESCRIPTION The SMAJ series support both Uni and Bi-direction. FEATURES  Available in SMA Package

丝印代码：YR；Surface Mount Transient Voltage Suppressors

Features Excellent clamping capability Low leakage current Low capacitance High surge capability Glass passivated chip Epoxy resin package Built-in strain relief Will not fatigue RoHS Compliant Fast response time: typically less than 1.0ps from 0 Volts to VBR min Applications Teleco

Transient Voltage Suppressor Diodes

Features For surface mounted applications in order to optimize board space. Low profile package Glass passivated junction Low inductance Plastic package has Underwriters Laboratory Flammability

400 W, 40 V TVS in SMA

The SMAJ series is designed to protect sensitive equipment against electrostatic discharges according to IEC 61000-4-2 and MIL STD 883, method 3015, and electrical overstress according to IEC 61000-4-4 and 5. This device is more generally used against surges below 600 W (10/1000 μs).\n\n The Planar • Peak pulse power: \n •400 W (10/1000 μs) \n •2.3 kW (8/20 μs) \n• Stand-off voltage range from 5 V to 188 V \n• Unidirectional and bidirectional types \n• Low leakage current: \n •0.2 µA at 25 °C \n •1 μA at 85 °C \n• Operating Tj max: 150 °C \n• JEDEC registered package outline;

400W 40V TVS transient suppression diodes

文件：309.328 Kbytes Page：5 Pages

丝印代码：YR；Transient Voltage Suppression Diodes

文件：141.57 Kbytes Page：5 Pages

封装/外壳：DO-214AC，SMA 包装：卷带（TR） 描述：TVS DIODE 40VWM 64.5VC SMA 电路保护 TVS - 二极管

400W SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR

文件：146.59 Kbytes Page：5 Pages

SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSORS

文件：244.38 Kbytes Page：3 Pages

封装/外壳：DO-214AC，SMA 包装：卷带（TR）剪切带（CT）Digi-Reel® 得捷定制卷带 描述：TVS DIODE 40VWM 64.5VC SMA 电路保护 TVS - 二极管

400W SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR

文件：81.88 Kbytes Page：4 Pages

SMAJ Transient Voltage Suppressor Diode Series

文件：174.09 Kbytes Page：5 Pages

丝印代码：YR；TRANSIENT VTAGE SUPPRESSOR

文件：1.20838 Mbytes Page：5 Pages

Low profile package

文件：495.04 Kbytes Page：5 Pages

Surface Mount Transient Voltage Suppressors (TVS)

文件：3.90527 Mbytes Page：56 Pages

丝印代码：YR；Surface Mount Transient Voltage Suppressors (TVS)

文件：1.70492 Mbytes Page：7 Pages

Transient Voltage Suppressors

文件：923.81 Kbytes Page：8 Pages