SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSORS

VOLTAGE RANGE 5.0 to 170 Volts 400 Watts Peak Power FEATURES * For surface mount application * Built-in strain relief * Excellent clamping capability * Low profile package * Fast response time: Typically less than 1.0ps from 0 volt to BV min. * Typical IR less than 1mA above 10V * High te

SURFACE MOUNT UNIDIRECTIONAL AND BIDIRECTIONAL TRANSIENT VOLTAGE SUPPRESSORS

REVERSE VOLTAGE - 5.0 to 170 Volts POWER DISSIPATION - 400 Watts FEATURES ● Rating to 200V VBR ● For surface mounted applications ● Reliable low cost construction utilizing molded plastic technique ● Plastic material has UL recognition 94V-0 ● Typical IR less than 1µA above 10V ●

SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSORS

FEATURES * For surface mount application * Built-in strain relief * Excellent clamping capability * Low profile package * Fast response time: Typically less than 1.0ps from 0 volt to BV min. * Typical IR less than 1 A above 10V * High temperature soldering guaranteed: 260 °C / 10 seconds at

400W Peak Power Surface Mount TVS

FEATURES * For surface mount application * Built-in strain relief * Excellent clamping capability * Low profile package * Fast response time: Typically less than 1.0ps from 0 volt to BV min. * Typical IR less than 1mA above 10V * High temperature soldering guaranteed: 260 °C / 10 seconds at

SMD Transient Voltage Suppressor

400W Surface Mount Transient Voltage Suppressors- 5.0V- 440V FEATURES • 400W peak pulse power capability with a 10/1000μs waveform, repetition rate (duty cycle) : 0.01. • Low profile surface mounted applications in order to optimize board space. • Excellent clamping capability • Low increment

Surface Mount Transient Voltage Suppressors (TVS)

Description The SMAJ series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features ✦ For surface mounted applications in order to optimize board space ✦ Low leakage ✦ Uni and Bidirectional un

Excellent clamping capability

Features ● Peak power dissipation 400W @10 x 1000 us Pulse ● Low profile package. ● Excellent clamping capability. ● Glass passivated junction. ● Fast response time: typically less than 1ps from 0 Volts to BV min ● Typical IR less than 1uA when VBR min above 12V. ● IEC 61000-4-2 ESD 30KV(Ai

TRANSIENT VOLTAGE SUPPRESSOR 400 WATT PEAK POWER

DESCRIPTION The SMAJ series support both Uni and Bi direction. FEATURES ⚫ Availabl e in SM A P ackage

Transient Voltage Suppressors

Features Glass passivated chip 400 W peak pulse power capability with a 10/1000 us waveform, repetitive rate (duty cycle):0.01 Low leakage Uni and Bidirectional unit Excellent clamping capability Very fast response time RoHS compliant

3.3 To 440V 400W Surface Mount Transient Voltage Suppressors (TVS)

Features For surface mounted applications in order to optimize board space Low leakage Uni and Bidirectional unit Glass passivated junction Low inductance Excellent clamping capability Typical IR less than 1μA above 10V 400W Peak power capability at 10 × 1000μs waveform Repetition rate (d

SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR DIODE

Features Glass Passivated Die Construction Uni- and Bi-Directional Versions Available Excellent Clamping Capability Fast Response Time Plastic Material: UL Flammability Classification Rating 94V-0

封装/外壳：DO-214AC，SMA 包装：卷带（TR） 描述：TVS DIODE 170VWM 288.75VC DO214 电路保护 TVS - 二极管

5.0 to 440Volts 400Watts SMD TRANSIENT VOLTAGE SUPPRESSORS

文件：298.7 Kbytes Page：5 Pages

瞬态抑制二极管

Surface Mount Transient Voltage Suppressors (TVS)

文件：939.27 Kbytes Page：7 Pages

Surface Mount Transient Voltage Suppressor Diodes

文件：183.23 Kbytes Page：7 Pages

Surface Mount Transient Voltage Suppressors

文件：746.63 Kbytes Page：7 Pages

400Watts Surface Mount Transient Voltage Suppressor

文件：843.59 Kbytes Page：4 Pages

Transient Voltage Suppressor Diodes

文件：191.87 Kbytes Page：5 Pages

Surface Mount Transient Voltage Suppressors (TVS)

文件：3.90527 Mbytes Page：56 Pages

Excellent clamping capability

文件：530.74 Kbytes Page：5 Pages

SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSORS

文件：244.38 Kbytes Page：3 Pages

400Watts Surface Mount Transient Voltage Suppressor

文件：844.78 Kbytes Page：4 Pages

Surface Mount Transient Voltage Suppressors

文件：735.55 Kbytes Page：7 Pages

Transient Voltage Suppressors

文件：2.63765 Mbytes Page：4 Pages

400W SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR

Features • 400W Peak Pulse Power Dissipation • 5.0V - 170V Standoff Voltages • Glass Passivated Die Construction • Uni- and Bi-Directional Versions Available • Excellent Clamping Capability • Fast Response Time • Plastic Material: UL Flammability Classification Rating 94V-0

400W SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR

Features • 400W Peak Pulse Power Dissipation • 5.0V - 170V Standoff Voltages • Glass Passivated Die Construction • Uni- and Bi-Directional Versions Available • Excellent Clamping Capability • Fast Response Time • Plastic Material: UL Flammability Classification Rating 94V-0

400W Peak Pulse Power Dissipation

Features • 400W Peak Pulse Power Dissipation • 5.0V - 170V Standoff Voltages • Glass Passivated Die Construction • Uni- and Bi-Directional Versions Available • Excellent Clamping Capability • Fast Response Time • Plastic Material: UL Flammability Classification Rating 94V-0

Surface Mount Transient Voltage Suppressors (TVS)

Description The SMAJ series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features ✦ For surface mounted applications in order to optimize board space ✦ Low leakage ✦ Uni and Bidirectional un

400W SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR

Features • 400W Peak Pulse Power Dissipation • 5.0V - 170V Standoff Voltages • Glass Passivated Die Construction • Uni- and Bi-Directional Versions Available • Excellent Clamping Capability • Fast Response Time • Plastic Material: UL Flammability Classification Rating 94V-0

400W Surface Mount Transient Voltage Suppressor

Features ● Stand-off voltage from 5.0 to 170 volts ● 400W Peak Pulse Power capability on 10/1000 µs waveform repetition rate(duty cycle): 0.01 ● Ideal for ESD protection of data lines in accordance with IEC 1000-4-2 (IEC801-2) ● Ideal for EFT protection of data lines in accordance wi

400W SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR

Features • 400W Peak Pulse Power Dissipation • 5.0V - 170V Standoff Voltages • Glass Passivated Die Construction • Uni- and Bi-Directional Versions Available • Excellent Clamping Capability • Fast Response Time • Plastic Material: UL Flammability Classification Rating 94V-0

400W SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR

Features • 400W Peak Pulse Power Dissipation • 5.0V - 170V Standoff Voltages • Glass Passivated Die Construction • Uni- and Bi-Directional Versions Available • Excellent Clamping Capability • Fast Response Time • Plastic Material: UL Flammability Classification Rating 94V-0

Excellent clamping capability

Features ● Peak power dissipation 400W @10 x 1000 us Pulse ● Low profile package. ● Excellent clamping capability. ● Glass passivated junction. ● Fast response time: typically less than 1ps from 0 Volts to BV min ● Typical IR less than 1uA when VBR min above 12V. ● IEC 61000-4-2 ESD 30KV(Ai

SMD Transient Voltage Suppressor

400W Surface Mount Transient Voltage Suppressors- 5.0V- 440V FEATURES • 400W peak pulse power capability with a 10/1000μs waveform, repetition rate (duty cycle) : 0.01. • Low profile surface mounted applications in order to optimize board space. • Excellent clamping capability • Low increment

400W SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR

Features • 400W Peak Pulse Power Dissipation • 5.0V - 170V Standoff Voltages • Glass Passivated Die Construction • Uni- and Bi-Directional Versions Available • Excellent Clamping Capability • Fast Response Time • Plastic Material: UL Flammability Classification Rating 94V-0

400W Peak Power Surface Mount TVS

FEATURES * For surface mount application * Built-in strain relief * Excellent clamping capability * Low profile package * Fast response time: Typically less than 1.0ps from 0 volt to BV min. * Typical IR less than 1mA above 10V * High temperature soldering guaranteed: 260 °C / 10 seconds at

SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR

Stand-off Voltage : 5.0 to 188V Peak Pulse Power : 400 W FEATURES : * 400W surge capability at 1ms * Optimized for LAN protection applications * Excellent clamping capability * Low zener impedance * Fast response time : typically less then 1.0 ps from 0 volt to VBR(min.) * Typica

SURFACE MOUNT TRANSIENT VOLAGE SUPPESSOR DIODE

VOLTAGE RANGE: 5.0 - 440 V POWER: 400Watts Features • Glass Passivated Die Construction • Uni- and Bi-Directional Versions Available • Excellent Clamping Capability • Fast Response Time • Plastic Material: UL Flammability Classification Rating 94V-0

Transient Voltage Suppressors

FEATURES ✧ For surface mounted applications in order to optimize board space. ✧ Low profile package. ✧ Built-in strain relief. ✧ Glass passivated junction. ✧ Low inductance. ✧ Excellent clamping capability. ✧ Repetition Rate (duty cycle): 0.01. ✧ Fast response time: typically less than 1.0

SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR

WORKING VOLTAGE:5.0 to 440V PEAK PULSE POWER:400W FEATURES • Glass passivated chip • 400W peak pulse power capability woth a 10/1000μ s waveform, repetitive rate (duty cycle):0.01 • Low leakage • Uni and Bidirectional unit • Excellent clamping capability • Very fast response time

SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR

Stand - Off Voltage - 5.0 to 170 Volts Peak Pulse Power - 400 Watt FEATURES ● Glass Passivated Die Construction ● Uni- and Bi-Directional Versions Available ● Excellent Clamping Capability ● Fast Response Time ● Plastic Case Material has UL Flammability Classification Rating 94V-O

400 Watt Transient Voltage Suppressors 5.0 to 440 Volts

400 Watt Transient Voltage Suppressors 5.0 to 440 Volts Features • For Surface Mount Applications • Unidirectional And Bidirectional • Low Inductance • High Temp Soldering: 260°C for 10 Seconds At Terminals • For Bidirectional Devices Add “C” To The Suffix of The Part Number: i

SURFACE MOUNT UNIDIRECTIONAL AND BIDIRECTIONAL TRANSIENT VOLTAGE SUPPRESSORS

REVERSE VOLTAGE - 5.0 to 170 Volts POWER DISSIPATION - 400 Watts FEATURES ● Rating to 200V VBR ● For surface mounted applications ● Reliable low cost construction utilizing molded plastic technique ● Plastic material has UL recognition 94V-0 ● Typical IR less than 1µA above 10V ●

SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR

VOLTAGE-5.0 TO 170 Volts 400 Watt Peak Pulse Power FEATURES • For surface mounted applications in order to optimize board space • Low profile package • Built-in strain relief • Glass passivated junction • Low inductance • Excellent clamping capability • Repetition rate (duty cycle):0.01 •

SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSORS

VOLTAGE RANGE 5.0 to 170 Volts 400 Watts Peak Power FEATURES * For surface mount application * Built-in strain relief * Excellent clamping capability * Low profile package * Fast response time: Typically less than 1.0ps from 0 volt to BV min. * Typical IR less than 1mA above 10V * High te

400W SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR

Features • 400W Peak Pulse Power Dissipation • 5.0V - 170V Standoff Voltages • Glass Passivated Die Construction • Uni- and Bi-Directional Versions Available • Excellent Clamping Capability • Fast Response Time • Plastic Material: UL Flammability Classification Rating 94V-0

400W SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR

Features • 400W Peak Pulse Power Dissipation • Glass Passivated Die Construction • Unidirectional and Bidirectional Versions Available • Excellent Clamping Capability • Fast Response Time • Lead Free Finish/RoHS Compliant (Note 1) • Green Molding Compound (No Halogen and Antimony) (Note 2)

Silicon Avalanche Diodes - 400W Surface Mount Transient Voltage Supressors

400W Surface Mount Transient Voltage Supressors FEATURES • RoHScompliant • For surface mounted applications in order to optimize board space • Low profile package • Built-in strain relief • Glass passivated junction • Low inductance • Excellent clamping capability • Repetition Rate (duty

400W Surface Mount Transient Voltage Suppressors

Feature: * 400 Watt Peak Power Dissipation * Glass Passivated Die Construction * Excellent Clamping Capability Fast Response Time * Plastic Material Has UL Flammability Classification Rating 94V-O

Transient Voltage Suppressors(TVS)

Features ■ For surface mounted applications in order to optimize board space ■ Low profile package ■ Glass passivated junction ■ Low inductance ■ Excellent clamping capability ■ 400W peak pulse power capability at 10/1000μs waveform, repetition rate (duty cycle): 0.01% ■ Fast response

400 Watt Transient Voltage Suppressors 5.0 to 440 Volts

Features • For Surface Mount Applications • Unidirectional And Bidirectional • Low Inductance • High Temp Soldering: 250°C for 10 Seconds At Terminals • For Bidirectional Devices Add “C” To The Suffix Of The Part Number: i.e.SMAJ5.0C or P4SMAJ5.0CA for 5% Tolerance • SMAJ5.0~SMAJ440CA c

400W SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR

Features • 400W Peak Pulse Power Dissipation • 5.0V - 170V Standoff Voltages • Glass Passivated Die Construction • Uni- and Bi-Directional Versions Available • Excellent Clamping Capability • Fast Response Time • Plastic Material: UL Flammability Classification Rating 94V-0

400W SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR

Features • 400W Peak Pulse Power Dissipation • 5.0V - 170V Standoff Voltages • Glass Passivated Die Construction • Uni- and Bi-Directional Versions Available • Excellent Clamping Capability • Fast Response Time • Plastic Material: UL Flammability Classification Rating 94V-0

SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR

FEATURES  For surface mounted applications in order to optimize board space  Typical maximum temperature coefficient △VBR=0.1xVBR@25°C x△T  Low profile package  Built-in strain relief  Glass passivated junction  Excellent clamping capability  Repetition Rate (duty cycle):0.01  Fast

3.3 To 440V 400W Surface Mount Transient Voltage Suppressors (TVS)

Features For surface mounted applications in order to optimize board space Low leakage Uni and Bidirectional unit Glass passivated junction Low inductance Excellent clamping capability Typical IR less than 1μA above 10V 400W Peak power capability at 10 × 1000μs waveform Repetition rate (d

5.0V-188V 400W

FEATURES • Low profile package • Ideal for automated placement • Glass passivated chip junction • Available in uni-directional and bi-directional • 400 W peak pulse power capability with a 10/1000 μs waveform, repetitive rate (duty cycle): 0.01 (300 W above 78 V) • Excellent clamping capa

TRANSIENT VOLTAGE SUPPRESSOR 400 WATT PEAK POWER

DESCRIPTION The SMAJ series support both Uni and Bi direction. FEATURES ⚫ Availabl e in SM A P ackage

Surface Mount Transient Voltage Suppressors

Features Excellent clamping capability Low leakage current Low capacitance High surge capability Glass passivated chip Epoxy resin package Built-in strain relief Will not fatigue RoHS Compliant Fast response time: typically less than 1.0ps from 0 Volts to VBR min Applications Teleco

SMAJ Series 400W Transient Voltage Suppressor

DESCRIPTION: TVS diodes can be used in a wide range of applications which like consumer electronic products, automotive industries, munitions, telecommunications, aerospace industries, and intelligent control systems. iodes FEATURES: Glass passivated or planar Excellent clamping capabili