Dual-Tone Receiver IC

OVERVIEW The SM8224B is a receiver and decoder that supports the Bellcore TR-NWT-000030 and SR-TSV-002476 standards calling number identification (caller ID) and call waiting dual-tone signals. It has separate caller ID signal and call waiting signal inputs, which allows the gain for each input t

Dual-Tone Receiver IC

OVERVIEW The SM8224B is a receiver and decoder that supports the Bellcore TR-NWT-000030 and SR-TSV-002476 standards calling number identification (caller ID) and call waiting dual-tone signals. It has separate caller ID signal and call waiting signal inputs, which allows the gain for each input t

Dual-Tone Receiver IC

OVERVIEW The SM8224B is a receiver and decoder that supports the Bellcore TR-NWT-000030 and SR-TSV-002476 standards calling number identification (caller ID) and call waiting dual-tone signals. It has separate caller ID signal and call waiting signal inputs, which allows the gain for each input t

CLOCK GENERATOR AND DRIVER FOR 8080A CPU

CLOCK GENERATOR AND DRIVER FOR 8080A CPU The Intel 8224 is a single chip clock generator/driver for the 8080A CPU. It is controlled by a crystal, selected by the designer to meet a variety of system speed requirements. Also included are circuit to provide power-up reset, advance status strobe, a

MSD Blaster GM Dual Tower Coil Pack

Parts Included: 1 - Blaster GM Dual Tower Coil Pack This MSD GM Dual Tower Coil is designed as a replacement coil and produces a high voltage spark. To get even more ignition performance, install an MSD DIS Series Ignition Control. To ease installation of a DIS Ignition use MSD’s Coil Interface

Precision, Dual-Channel, JFET Input Rail-to-Rail Instrumentation Amplifier

GENERAL DESCRIPTION The AD8253 is an instrumentation amplifier with digitally programmable gains that has GΩ input impedance, low output noise, and low distortion making it suitable for interfacing with sensors and driving high sample rate analog-to-digital converters (ADCs). It has high bandwidt

Wide Supply Range, Rail-to-Rail Output Instrumentation Amplifier

GENERAL DESCRIPTION The AD8426 is a dual-channel, low cost, wide supply range instrumentation amplifier that requires only one external resistor to set any gain from 1 to 1000. The AD8426 is designed to work with a variety of signal voltages. A wide input range and rail-to-rail output allow the

Precision, Dual-Channel, JFET Input Rail-to-Rail Instrumentation Amplifier

文件：864.6 Kbytes Page：28 Pages