Noise Diodes 10 kHz to 100 MHz

Noise Diodes 10 kHz to 100 MHz Specifications RF Frequency 10 kHz to 100 MHz Noise Output 34 dB Min (10 KHz to 1 MHz) ENR 33 dB min (1 MHz to 10 MHz) ENR 31 db min (10 MHz to 100 MHz) ENR Noise Spectral Density (No) -140 dBm/Hz Min (

SM Solenoids

 A range of seven (7) stripped frame solenoids to suit a wide range of push and pull applications.  Wide choice of AC* or DC operating coils.  Two (2) miniature solenoids for light high speed applications.  Five (5) robust general purpose solenoids.  Thrust rod lengths to order.  Suit

RECTIFIER UP YO 10kV, 300mA, 2.5us

1.0 AMP SURFACE MOUNT SILICON RECTIFIERS

VOLTAGE RANGE 50 to 1000 Volts CURRENT 1.0 Ampere FEATURES * Low forward voltage drop * Low leakage current * High reliability MECHANICAL DATA * Case: Molded plastic * Epoxy: UL 94V-0 rate flame retardant * Metallurgically bonded construction * Polarity: Color ban

SURFACE MOUNT GALSS PASSIVATED JUNCTION RECTIFIER

Reverse Voltage - 50 to 1000 Volts Forward Current - 1.0Ampere FEATURES . The plasitc package carries Underwrites Laboratory Flammability Classification 94V-0 . For surface mounted applications . Glass passivated junction . High temperature soldering guaranteed: 250 /10 s

Glass passivated type

Glass passivated type Features Plastic package has Underwriters Laboratory FlammabilityClassification 94V-O Utilizing Flame Retardant Epoxy Molding Compound. For surface mounted applications. Exceeds environmental standards of MIL-S-19500 / 228 Low leakage current. Mechanical

Surface Mount Standard Recovery Glass Passivated Rectifiers

Features: * For Surface Mount Application * Glass Passivated Chip * Low Reverse Leakage Current * Low Forward Voltage Drop And High Current Capability * Plastic Meterial Has UL Flammability Classification 94V-0

CURRENT 1.0 Ampere VOLTAGE 50 to 1000 Volts

CURRENT 1.0 Ampere VOLTAGE 50 to 1000 Volts Features · The plastic package carries Underwrites Laboratory Flammability Classification 94V-0 · For surface mounted applications · Glass passivated junction · High temperature soldering guaranteed: 250℃/10 seconds, at terminal

1.0 AMP SURFACE MOUNT SILICON RECTIFIERS

VOLTAGE RANGE 50 to 1000 Volts CURRENT 1.0 Ampere FEATURES * Low forward voltage drop * Low leakage current * High reliability MECHANICAL DATA * Case: Molded plastic * Epoxy: UL 94V-0 rate flame retardant * Metallurgically bonded construction * Polarity: Color ban

TECHNICAL SPECIFICATIONS OF SURFACE MOUNT SILICON RECTIFIER

VOLTAGE RANGE - 50 to 1000 Volts CURRENT - 1.0 Ampere FEATURES * Ideal for surface mounted applications * Low leakage current * Glass passivated junction MECHANICAL DATA * Case: Molded plastic * Epoxy: UL 94V-0 rate flame retardant * Mounting position: Any * Weight:

Surface Mount Si-Rectifiers

Surface Mount Si-Rectifiers • Nominal current 1 A • Repetitive peak reverse voltage 50 - 2000 V • Plastic case MELF DO-213AB • Weight approx. 0.12 g • Plastic material has UL classification 94V-0

Standard silicon rectifier diodes

Forward Current: 1 A Reverse Voltage: 50 to 1000 V

SURFACE MOUNT SILICON RECTIFIER

FEATURES * Ideal for surface mounted applications * Low leakage current * Glass passivated junction

SURFACE MOUNT RECTIFIER

REVERSE VOLTAGE: 50 - 1000 V CURRENT: 1.0 A FEATURES ◇ Glass passivated device ◇ Ideal for surface mouted applications ◇ Low leakage current ◇ Metallurgically bonded construction MECHANICAL DATA ◇ Case:JEDEC DO-213AB,molded plastic over passivated chip ◇ Terminals:So

SURFACE MOUNT GLASS PASSIVATED SILICON RECTIFIERS

FEATURES • Ldeal for surface mounted applications • Easy pick and place • Low leakage current • Glass passivated chips • Metallurgically bonded construction • High temperature soldering guaranteed : 250°C/10 seconds/.375 , (9.5mm) lead lengths

SURFACE MOUNT GLASS PASSIVATED RECTIFIER

VOLTAGE RANGE 50 to 1000 Volts CURRENT 1.0 Ampere FEATURES · For surface mounted applications · Glass passivated chip junction · Low leakage current · Plastic package has underwrites laboratory flammability Classification 94V-0 · High temperature soldering guaranteed 250℃/10

SURFACE MOUNT SILICON RECTIFIER DIODES

Features ● Glass Passivated Junction ● High Current Capability ● Low Forward Voltage Drop ● High Reliability and Low Leakage ● For Surface Mount Application ● Plastic Material - UL Flammability Classification Rating 94V-0

SURFACE MOUNT GLASS PASSIVATED JUNCTION

FEATURES : * Glass Passivated Junction * Hight Current Capability * Low Forward voltage Drop * Hight Reliability and Low Leakage * For Surface Mount Application * Plastic Material - UL Flammability Classification Rating 94 V-0 * Pb / RoHS Free

1A SURFACE MOUNT SILICON RECTIFIERS

FEATURES ● GLASS PASSIVATED JUNCTION ● IDEAL FOR SURFACE MOUNTED APPLICATIONS ● LOW LEAKAGE CURRENT ● UL 94V-0 FLAME RETARDANT EPOXY MOLDING COMPOUND

Surface Mount Rectifiers

Features ◇ Glass passivated device ◇ Ideal for surface mouted applications ◇ Low leakage current ◇ Metallurgically bonded construction

1.0AMP. Surface Mount Glass Passivated Silicon Rectifiers Voltage Range 50 to 1000 Volts Current 1.0 Amperes

FEATURES ◆ Plastic package has carries underwriters Laboratory flammability classification 94V-0 ◆ Surge overload rating to 30 Ampers peak ◆ Ideal for printed circuit board. ◆ Reliable low cost construction utilizing molded plastic technique results in in-expensive product. ◆ High temperature

SURFACE MOUNT GLASS PASSIVATED SILICON RECTIFIER

FEATURES • For surface mounted applications • Glass passivated chip junction • Low leakage current • Plastic package has underwrites laboratory flammability Classification 94V-0 • High temperature soldering guaranteed 250℃/10 second at terminals

SURFACE MOUNT RECTIFIERS

FEATURES ◇ Glass passivated device ◇ Ideal for surface mouted applications ◇ Low leakage current ◇ Metallurgically bonded construction

SURFACE MOUNT GLASS PASSIVATED JUNCTION

FEATURES : * Glass Passivated Junction * Hight Current Capability * Low Forward voltage Drop * Hight Reliability and Low Leakage * For Surface Mount Application * Plastic Material - UL Flammability Classification Rating 94 V-0

1.0 AMP SURFACE MOUNT SILICON RECTIFIERS

VOLTAGE RANGE 50 to 1000 Volts CURRENT 1.0 Ampere FEATURES * Ideal for surface mount applications * Easy pick and place * Built-in strain relief * High surge current capability MECHANICAL DATA * Case: Molded plastic * Epoxy: UL 94V-0 rate flame retardant * Termina

1.0 AMP SURFACE MOUNT SILICON RECTIFIERS

FEATURES * Ideal for surface mount applications * Easy pick and place * Built-in strain relief * High surge current capability

1.0 AMP Surface Mount Silicon Rectifiers

FEATURES  RoHS Compliant Product  Ideal for surface mount applications  Easy pick and place  Built-in strain relief  High surge current capability MECHANICAL DATA  Case: DO-214AC (SMA)  Case Material: Molded Plastic. UL Flammability Classification Rating

SURFACE MOUNT SILICON RECTIFIER DIODES

Features ● Diffused junction ● For surface mounted applications ● Low reverse leakage current ● Low forward voltage drop ● High current capability ● Plastic material has UL flammability classification 94V-0

Voltage 50 ~ 1000 V 1.0Amp Surface Mount Silicon Rectifiers

FEATURES • Low profile package • Glass Passivated Chip Junction • Low reverse current • Lead free in comply with EU RoHS 2011/65/EU directives MECHANICAL DATA • Case : SMAM • Terminals: Solderable per MIL-STD-750, Method 2026 • Weight: 27 mgram (Approximate)

1.0Amp Surface Mount Silicon Rectifiers

FEATURES ● RoHS Compliant Product ● Ideal for surface mount applications ● Easy pick and place ● Built-in strain relief ● High surge current capability

1.0 A Glass Passivated Surface Mount Rectifiers

FEATURES Low forward surge current Ideal for surface mounted applications Low leakage current MECHANICAL DATA Case: JEDEC SOD-123FL, molded plastic over passivated chip Terminals: Solder Plated, solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes cathode end

Glass Passivated Surface Mount Rectifiers

FEATURES Low forward surge current Ideal for surface mounted applications Low leakage current Mechanical Data Case: JEDEC SOD-123FL, molded plastic over passivated chip Terminals: Solder Plated, solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes cathode end

1A SURFACE MOUNT SILICON RECTIFIERS

FEATURES GLASS PASSIVATED JUNCTION IDEAL FOR SURFACE MOUNTED APPLICATIONS LOW LEAKAGE CURRENT UL 94V-0 FLAME RETARDANT EPOXY MOLDING COMPOUND ROHS MECHANICAL DATA CASE: TRANSFER MOLDED, MELF DIMENSIONS IN INCHES AND (MILLIMETERS) TERMINALS: SOLDERABLE PER MIL-STD-750, MET

1.0 Amp Surface Mount General Purpose Rectifiers

FEATURES • Batch process design, excellent power dissipation offers better reverse leakage current and thermal resistance. • Low profile surface mounted application in order to optimize board space. • Small plastic SMD package. • High surge and high current capability. • Fast switching f

1.0 AMP SURFACE MOUNT SILICON RECTIFIERS

1.0 AMP SURFACE MOUNT SILICON RECTIFIERS VOL T AGE RANGE 50 to 1000 Volts CURRENT 1.0 Ampere FEA TURES * Ideal for surface mount applications * Easy pick and place * Built-in strain relief * High surge current capability

1.0 Amp Surface Mount General Purpose Rectifiers

50 ~ 1000 V 1.0 Amp Surface Mount General Purpose Rectifiers FEATURES Batch process design, excellentpower dissipation offers better reverse leakage current and thermal resistance. Low profile surface mounted application in order to optimize board space. Small plastic SMD package.

1.0 Ampere Silion Rectifier 50 to 1000 Volts

Features • Lead Free Finish/Rohs Compliant (Note1) (PSuffix designates Compliant. See ordering information) • Low Leakage Current • Glass Passivated Junction • Halogen free available upon request by adding suffix -HF • Epoxy meets UL 94 V-0 flammability rating • Moisture Sensitivity Level 1

SURFACE MOUNT GENERAL PURPOSE SILICON RECTIFIER

FEATURES ♦ Glass passivated device ♦ Ideal for surface mouted applications ♦ Low reverse leakage ♦ Metallurgically bonded construction ♦ High temperature soldering guaranteed: 250 °C/10 seconds,0.375”(9.5mm) lead length, 5 lbs. (2.3kg) tension

1.0 Ampere Silion Rectifier 50 to 1000 Volts

Features • Lead Free Finish/Rohs Compliant (Note1) (PSuffix designates Compliant. See ordering information) • Low Leakage Current • Glass Passivated Junction • Halogen free available upon request by adding suffix -HF • Epoxy meets UL 94 V-0 flammability rating • Moisture Sensitivity Level 1

1.0 Ampere Silion Rectifier 50 to 1000 Volts

Features • Lead Free Finish/Rohs Compliant (Note1) (PSuffix designates Compliant. See ordering information) • Low Leakage Current • Glass Passivated Junction • Halogen free available upon request by adding suffix -HF • Epoxy meets UL 94 V-0 flammability rating • Moisture Sensitivity Level 1

1.0 Ampere Silion Rectifier 50 to 1000 Volts

Features • Lead Free Finish/Rohs Compliant (Note1) (PSuffix designates Compliant. See ordering information) • Low Leakage Current • Glass Passivated Junction • Halogen free available upon request by adding suffix -HF • Epoxy meets UL 94 V-0 flammability rating • Moisture Sensitivity Level 1

1.0 AmpereSilion Rectifier

Features • Lead Free Finish/Rohs Compliant (Note1) (PSuffix designates Compliant. See ordering information) • Low Leakage Current • Glass Passivated Junction • Case Material: Molded Plastic. UL Flammability Classification Rating 94V-0 and MSL rating 1

1.0 Ampere Silion Rectifier 50 to 1000 Volts

Features • Lead Free Finish/Rohs Compliant (Note1) (PSuffix designates Compliant. See ordering information) • Low Leakage Current • Glass Passivated Junction • Halogen free available upon request by adding suffix -HF • Epoxy meets UL 94 V-0 flammability rating • Moisture Sensitivity Level 1

GLASS PASSIVATED SILICON RECTIFIER

VOLTAGE RANGE 50 - 1000 Volts CURRENT 1.0 Ampere FEATURES * Low leakage current * Ideal for surface mounted applications * Metallurgically bonded construction * Plastic package has Underwriters Laboratory Flammability Classification 94V-0 * Glass passivated junction * H

Surface Mount Si-Rectifiers

Surface Mount Si-Rectifiers • Nominal current 1 A • Repetitive peak reverse voltage 50...1800 V • Plastic case QuadroMELF ~ DO-213AB • Weight approx. 0.12 g • Plastic material has

1.0AMP. Surface Mount Glass Passivated Silicon Rectifiers Voltage Range 50 to 1000 Volts Current 1.0 Amperes

FEATURES ◆ Plastic package has carries underwriters Laboratory flammability classification 94V-0 ◆ Surge overload rating to 30 Ampers peak ◆ Ideal for printed circuit board. ◆ Reliable low cost construction utilizing molded plastic technique results in in-expensive product. ◆ High temperature

GLASS PASSIVATED SILICON RECTIFIER

VOLTAGE RANGE 50 - 1000 Volts CURRENT 1.0 Ampere FEATURES * Low leakage current * Ideal for surface mounted applications * Metallurgically bonded construction * Plastic package has Underwriters Laboratory Flammability Classification 94V-0 * Glass passivated junction * High temperature s

SURFACE MOUNT GALSS PASSIVATED JUNCTION RECTIFIER

Reverse Voltage - 50 to 1000 Volts Forward Current - 1.0Ampere FEATURES . The plasitc package carries Underwrites Laboratory Flammability Classification 94V-0 . For surface mounted applications . Glass passivated junction . High temperature soldering guaranteed: 250 /10 s

Glass passivated type

Glass passivated type Features Plastic package has Underwriters Laboratory FlammabilityClassification 94V-O Utilizing Flame Retardant Epoxy Molding Compound. For surface mounted applications. Exceeds environmental standards of MIL-S-19500 / 228 Low leakage current. Mechanical

TECHNICAL SPECIFICATIONS OF SURFACE MOUNT SILICON RECTIFIER

VOLTAGE RANGE - 50 to 1000 Volts CURRENT - 1.0 Ampere FEATURES * Ideal for surface mounted applications * Low leakage current * Glass passivated junction MECHANICAL DATA * Case: Molded plastic * Epoxy: UL 94V-0 rate flame retardant * Mounting position: Any * Weight:

Surface Mount Si-Rectifiers

Surface Mount Si-Rectifiers • Nominal current 1 A • Repetitive peak reverse voltage 50 - 2000 V • Plastic case MELF DO-213AB • Weight approx. 0.12 g • Plastic material has UL classification 94V-0

SURFACE MOUNT SILICON RECTIFIER

FEATURES * Ideal for surface mounted applications * Low leakage current * Glass passivated junction

Standard silicon rectifier diodes

Forward Current: 1 A Reverse Voltage: 50 to 1000 V

Surface Mount Standard Recovery Glass Passivated Rectifiers

Features: * For Surface Mount Application * Glass Passivated Chip * Low Reverse Leakage Current * Low Forward Voltage Drop And High Current Capability * Plastic Meterial Has UL Flammability Classification 94V-0

SURFACE MOUNT GLASS PASSIVATED SILICON RECTIFIERS

FEATURES • Ldeal for surface mounted applications • Easy pick and place • Low leakage current • Glass passivated chips • Metallurgically bonded construction • High temperature soldering guaranteed : 250°C/10 seconds/.375 , (9.5mm) lead lengths

CURRENT 1.0 Ampere VOLTAGE 50 to 1000 Volts

CURRENT 1.0 Ampere VOLTAGE 50 to 1000 Volts Features · The plastic package carries Underwrites Laboratory Flammability Classification 94V-0 · For surface mounted applications · Glass passivated junction · High temperature soldering guaranteed: 250℃/10 seconds, at terminal

1.0 AMP SURFACE MOUNT SILICON RECTIFIERS

VOLTAGE RANGE 50 to 1000 Volts CURRENT 1.0 Ampere FEATURES * Low forward voltage drop * Low leakage current * High reliability MECHANICAL DATA * Case: Molded plastic * Epoxy: UL 94V-0 rate flame retardant * Metallurgically bonded construction * Polarity: Color ban

1.0 AMP SURFACE MOUNT SILICON RECTIFIERS

VOLTAGE RANGE 50 to 1000 Volts CURRENT 1.0 Ampere FEATURES * Low forward voltage drop * Low leakage current * High reliability MECHANICAL DATA * Case: Molded plastic * Epoxy: UL 94V-0 rate flame retardant * Metallurgically bonded construction * Polarity: Color ban

SURFACE MOUNT RECTIFIER

REVERSE VOLTAGE: 50 - 1000 V CURRENT: 1.0 A FEATURES ◇ Glass passivated device ◇ Ideal for surface mouted applications ◇ Low leakage current ◇ Metallurgically bonded construction MECHANICAL DATA ◇ Case:JEDEC DO-213AB,molded plastic over passivated chip ◇ Terminals:So

SURFACE MOUNT GLASS PASSIVATED RECTIFIER

VOLTAGE RANGE 50 to 1000 Volts CURRENT 1.0 Ampere FEATURES · For surface mounted applications · Glass passivated chip junction · Low leakage current · Plastic package has underwrites laboratory flammability Classification 94V-0 · High temperature soldering guaranteed 250℃/10