Soldering of the frame realizes higher solder strength

Side Push Type with 1.55mm Height (Surface Mount Type) Soldering of the frame realizes higher solder strength

高度为1.55mm的Side Push型（表面贴装） SKTD系列

·型 Surface mount \n·动作力 1.6N \n·操作方向 Side push \n·行程 0.15mm \n·操作寿命 (5mA 5V DC) 200,000 cycles \n·初期接触电阻 500mΩ max. \n·保护結构 相当于IP67 \n·系列 Sharp feeling type \n·使用温度范围 -30℃ to +85℃ \n·最大额定 50mA 12V DC \n·最小额定 10μA 1V DC \n·电性能 绝缘电阻 100MΩ min. 100V DC f;

4.0A GLASS PASSIVATED BRIDGE RECTIFIER

Features ● Glass Passivated Die Construction ● Low Forward Voltage Drop ● High Current Capability ● High Reliability ● High Surge Current Capability ● Ideal for Printed Circuit Boards

SCRs

General Description The Teccor line of thyristor SCR semi-conductors are half-wave, unidirectional, gate-controlled rectifiers which complement Teccors line of sensitive SCRs. Teccor offers devices with ratings of 1 A to 70 A and 200 V to 1000 V, with gate sensitivities from 10 mA to 50 mA. If ga

SCRs

General Description The Teccor line of thyristor SCR semi-conductors are half-wave, unidirectional, gate-controlled rectifiers which complement Teccors line of sensitive SCRs. Teccor offers devices with ratings of 1 A to 70 A and 200 V to 1000 V, with gate sensitivities from 10 mA to 50 mA. If ga

SCRs

General Description The Teccor line of thyristor SCR semi-conductors are half-wave, unidirectional, gate-controlled rectifiers which complement Teccors line of sensitive SCRs. Teccor offers devices with ratings of 1 A to 70 A and 200 V to 1000 V, with gate sensitivities from 10 mA to 50 mA. If ga

SCRs

General Description The Teccor line of thyristor SCR semi-conductors are half-wave, unidirectional, gate-controlled rectifiers which complement Teccors line of sensitive SCRs. Teccor offers devices with ratings of 1 A to 70 A and 200 V to 1000 V, with gate sensitivities from 10 mA to 50 mA. If ga