Pin-Controlled 1_710 MHz Jitter Cleaning Clock

Description The Si5317 is a flexible 1:1 jitter cleaning clock for high-performance applications that require jitter attenuation without clock multiplication. The Si5317 accepts a single clock input ranging from 1 to 710 MHz and generates two low jitter clock outputs at the same frequency. The cl

ANY-FREQUENCY PRECISION CLOCK MULTIPLIER/JITTER ATTENUATOR

Features  Generates any frequency from 2 kHz to 945 MHz and select frequencies to 1.4 GHz from an input frequency of 2 kHz to 710 MHz  Ultra-low jitter clock outputs with jitter generation as low as 300 fs rms (12 kHz–20 MHz)  Integrated loop filter with selectable loop bandwidth (60

ANY-FREQUENCY PRECISION CLOCK MULTIPLIER/ JITTER ATTENUATOR

Features  Generates any frequency from 2 kHz to 945 MHz and select frequencies to 1.4 GHz from an input frequency of 2 kHz to 710 MHz  Ultra-low jitter clock outputs as low as 290 fs rms (12 kHz–20 MHz), 320 fs rms (50 kHz–80 MHz)  Integrated loop filter with selectable loop bandwidth

ANY-RATE PRECISION CLOCK MULTIPLIER/JITTER ATTENUATOR

ANY-RATE PRECISION CLOCK MULTIPLIER/JITTER ATTENUATOR

文件：713.76 Kbytes Page：18 Pages

ANY-FREQUENCY PRECISION CLOCK MULTIPLIER/JITTER ATTENUATOR

Features  Generates any frequency from 2 kHz to 945 MHz and select frequencies to 1.4 GHz from an input frequency of 2 kHz to 710 MHz  Ultra-low jitter clock outputs with jitter generation as low as 300 fs rms (12 kHz–20 MHz)  Integrated loop filter with selectable loop bandwidth (60

ANY-FREQUENCY PRECISION CLOCK MULTIPLIER/JITTER ATTENUATOR

Features  Generates any frequency from 2 kHz to 945 MHz and select frequencies to 1.4 GHz from an input frequency of 2 kHz to 710 MHz  Ultra-low jitter clock outputs with jitter generation as low as 300 fs rms (12 kHz–20 MHz)  Integrated loop filter with selectable loop bandwidth (60

ANY-FREQUENCY PRECISION CLOCK MULTIPLIER/JITTER ATTENUATOR

Features  Generates any frequency from 2 kHz to 945 MHz and select frequencies to 1.4 GHz from an input frequency of 2 kHz to 710 MHz  Ultra-low jitter clock outputs with jitter generation as low as 300 fs rms (12 kHz–20 MHz)  Integrated loop filter with selectable loop bandwidth (60

Jitter Attenuator Clock Multiplier

ANY-RATE PRECISION CLOCK MULTIPLIER/JITTER ATTENUATOR

文件：713.76 Kbytes Page：18 Pages

封装/外壳：100-TQFP 包装：托盘 描述：IC CLK MULTIPLIER ATTEN 100TQFP 集成电路（IC） 时钟发生器，PLL，频率合成器

封装/外壳：100-TQFP 包装：托盘 描述：IC CLK MULTIPLIER ATTEN 100TQFP 集成电路（IC） 时钟发生器，PLL，频率合成器

Jitter Attenuator Clock Multiplier

ANY-RATE PRECISION CLOCK MULTIPLIER/JITTER ATTENUATOR

文件：713.76 Kbytes Page：18 Pages

ANY-RATE PRECISION CLOCK MULTIPLIER/JITTER ATTENUATOR

文件：713.76 Kbytes Page：18 Pages

ZENER DIODE CHIPS

• ZENER DIODE CHIPS • ALL JUNCTIONS COMPLETELY PROTECTED WITH SILICON DIOXIDE • ELECTRICALLY EQUIVALENT TO 1N5333B THRU 1N5379B • 5 WATT CAPABILITY WITH PROPER HEAT SINKING • COMPATIBLE WITH ALL WIRE BONDING AND DIE ATTACH TECHNIQUES, WITH THE EXCEPTION OF SOLDER REFLOW

HIGH POWER ZENER DIODE 6.8 VOLTS THRU 200 VOLTS 5.0W, 5 TOLERANCE

DESCRIPTION: The CENTRAL SEMICONDUCTOR CMZ5334B series silicon Zener diodes are voltage regulators, manufactured in an epoxy molded surface mount package, and designed for use in industrial, commercial, entertainment and computer applications. MARKING: SEE MARKING CODE ON ELECTRICAL CHARACTERIST

Silicon Controlled Rectifier (SCR) 125 Amp

Silicon Controlled Rectifier (SCR) 125 Amp

5 Watt Surface Mount Silicon Zener Diodes

Features • Low profile package for surface mounting (flat handling surface for accurate placement) • Zener Voltage 3.3V to 200V • High Surge Current Capability • For available tolerances - see note 1 • Available on Tape and Reel (see EIA std RS-481)

5 Watt Surface Mount Silicon Zener Diodes

Features • Low profile package for surface mounting (flat handling surface for accurate placement) • Zener Voltage 3.3V to 200V • High Surge Current Capability • For available tolerances - see note 1 • Available on Tape and Reel (see EIA std RS-481)