500KHz,18關A, Rail-to-Rail I/O CMOS Operational Amplifier

PRODUCT DESCRIPTION The SGM8531 (single), SGM8532 (dual) and SGM8534 (quad) are low cost, rail-to-rail input and output voltage feedback amplifiers. They have a wide input common mode voltage range and output voltage swing, and take the minimum operating supply voltage down to 2.1V. The maximum

500kHz, 18µA, Rail-to-Rail I/O, CMOS Operational Amplifier

The SGM8531 (single), SGM8532 (dual) and SGM8534 (quad) are low cost, voltage feedback amplifiers. These devices can operate from 2.1V to 5.5V single supply, while consuming only 18μA quiescent current per amplifier. They provide rail-to-rail input with a wide input common mode voltage range and rai • Low Cost\n\n• Input Offset Voltage: 3.5mV (MAX)\n\n• Ultra-Low Input Bias Current: 0.5pA\n\n• Unity-Gain Stable\n\n• Gain-Bandwidth Product: 500kHz\n\n• Rail-to-Rail Input and Output\n\n• Supply Voltage Range: 2.1V to 5.5V\n\n• Input Voltage Range: -0.1V to 5.6V with VS = 5.5V\n\n• Low Supply Curr;

CMOS Operational Amplifiers

文件：406.11 Kbytes Page：15 Pages

500KHz,18關A, Rail-to-Rail I/O CMOS Operational Amplifier

PRODUCT DESCRIPTION The SGM8531 (single), SGM8532 (dual) and SGM8534 (quad) are low cost, rail-to-rail input and output voltage feedback amplifiers. They have a wide input common mode voltage range and output voltage swing, and take the minimum operating supply voltage down to 2.1V. The maximum

500KHz,18關A, Rail-to-Rail I/O CMOS Operational Amplifier

PRODUCT DESCRIPTION The SGM8531 (single), SGM8532 (dual) and SGM8534 (quad) are low cost, rail-to-rail input and output voltage feedback amplifiers. They have a wide input common mode voltage range and output voltage swing, and take the minimum operating supply voltage down to 2.1V. The maximum

500KHz,18關A, Rail-to-Rail I/O CMOS Operational Amplifier

PRODUCT DESCRIPTION The SGM8531 (single), SGM8532 (dual) and SGM8534 (quad) are low cost, rail-to-rail input and output voltage feedback amplifiers. They have a wide input common mode voltage range and output voltage swing, and take the minimum operating supply voltage down to 2.1V. The maximum

500KHz,18關A, Rail-to-Rail I/O CMOS Operational Amplifier

PRODUCT DESCRIPTION The SGM8531 (single), SGM8532 (dual) and SGM8534 (quad) are low cost, rail-to-rail input and output voltage feedback amplifiers. They have a wide input common mode voltage range and output voltage swing, and take the minimum operating supply voltage down to 2.1V. The maximum

500KHz,18關A, Rail-to-Rail I/O CMOS Operational Amplifier

PRODUCT DESCRIPTION The SGM8531 (single), SGM8532 (dual) and SGM8534 (quad) are low cost, rail-to-rail input and output voltage feedback amplifiers. They have a wide input common mode voltage range and output voltage swing, and take the minimum operating supply voltage down to 2.1V. The maximum

CMOS Operational Amplifiers

文件：406.11 Kbytes Page：15 Pages

Low Cost, 250 mA Output Single-Supply Amplifiers

GENERAL DESCRIPTION The AD8531, AD8532, and AD8534 are single, dual, and quad rail-to-rail input/output single-supply amplifiers featuring 250 mA output drive current. This high output current makes these amplifiers excellent for driving either resistive or capacitive loads. AC performance is ver

Low Cost, 250 mA Output Single-Supply Amplifiers

GENERAL DESCRIPTION The AD8531, AD8532, and AD8534 are single, dual, and quad rail-to-rail input/output single-supply amplifiers featuring 250 mA output drive current. This high output current makes these amplifiers excellent for driving either resistive or capacitive loads. AC performance is ver

Low Cost, 250 mA Output Single-Supply Amplifiers

GENERAL DESCRIPTION The AD8531, AD8532, and AD8534 are single, dual, and quad rail-to-rail input/output single-supply amplifiers featuring 250 mA output drive current. This high output current makes these amplifiers excellent for driving either resistive or capacitive loads. AC performance is ver

34 x 128 pixel matrix driver

GENERAL DESCRIPTION The PCF8531 is a low power CMOS LCD row/column driver, designed to drive dot matrix graphic displays at multiplex rates of 1 : 17, 1 : 26 and 1 : 34. Furthermore, it can drive up to 128 icons. All necessary functions for the display are provided in a single chip, including on-

T8502 and T8503 Dual PCM Codecs with Filters

General Description The Multichannel Programmable Codec Chip Set is comprised of the T8531 16-channel line card signal processor and one or two custom T8532 octal A/D and D/A converters. A ROM-coded tone plant is included on the signal processor. Together these devices achieve a highly integrated