LOW-VOLTAGE SUPERVISORY CIRCUIT

DESCRIPTION This device was designed to provide all the operational features of the SG1543/2543/3543 devices but with the added advantage of uncommitted inputs to the voltage sensing comparators. This allows monitoring of voltage levels less than 2.5 volts by dividing down the internal reference

LOW-VOLTAGE SUPERVISORY CIRCUIT

文件：149.34 Kbytes Page：4 Pages

LOW-VOLTAGE SUPERVISORY CIRCUIT

DESCRIPTION This device was designed to provide all the operational features of the SG1543/2543/3543 devices but with the added advantage of uncommitted inputs to the voltage sensing comparators. This allows monitoring of voltage levels less than 2.5 volts by dividing down the internal reference

LOW-VOLTAGE SUPERVISORY CIRCUIT

DESCRIPTION This device was designed to provide all the operational features of the SG1543/2543/3543 devices but with the added advantage of uncommitted inputs to the voltage sensing comparators. This allows monitoring of voltage levels less than 2.5 volts by dividing down the internal reference

LOW-VOLTAGE SUPERVISORY CIRCUIT

DESCRIPTION This device was designed to provide all the operational features of the SG1543/2543/3543 devices but with the added advantage of uncommitted inputs to the voltage sensing comparators. This allows monitoring of voltage levels less than 2.5 volts by dividing down the internal reference

LOW-VOLTAGE SUPERVISORY CIRCUIT

文件：149.34 Kbytes Page：4 Pages

High Reliability Supervisory Circuits and Voltage References

High Reliability Supervisory Circuits and Voltage References

LOW-VOLTAGE SUPERVISORY CIRCUIT

文件：149.34 Kbytes Page：4 Pages

LOW-VOLTAGE SUPERVISORY CIRCUIT

文件：149.34 Kbytes Page：4 Pages

High Reliability Supervisory Circuits and Voltage References

QUAD DARLINGTON POWER DRIVER

Combining logic gates and high-current bipolar outputs, the UDN2544B quad Darlington power driver provides an interface be tween low-level logic circuitry and high-power loads. Each of the four outputs can sink up to 1.8 A in the on state with peak inrush currents to 2.5 A. The four power outputs

Bandpass Filter

General Description KR 2544 is a 65 MHz bandpass filter. The filter has a 3 dB bandwidth of 10 MHz and is designed for 50 Ω source and load impedance. Other center frequencies and bandwidths are available. Please consult the factory. Features • 65 MHz Bandpass • 50 Ω • SMA Connectors

Break-Away Bumpers

文件：132.1 Kbytes Page：1 Pages

Break-Away Bumpers

文件：132.09 Kbytes Page：1 Pages

Mounting brackets

文件：1.18215 Mbytes Page：1 Pages