Fabricated in a liquid phase epitaxy process

Features: • Fabricated in a liquid phase epitaxy process • Anode is electrically connected to the case • High reliability • Matches all Si-Photodetectors • Same package as BPX 63, BP 103, LD 242, SFH 464 • DIN humidity caregory in acc. with DIN 40 040 GQG Applications • Photointerrupters

GaAlAs-IR-Lumineszenzdiode GaAlAs Infrared Emitter

Features ● Highly efficient GaAlAs LED ● Anode is electrically connected to the case ● High pulse power ● High reliability ● DIN humidity category in acc. with DIN 40040 GQG ● Same package as BPX 63, BP 103, LD 242, SFH 464 Applications ● IR remote controls and sound transmission ● Photoi

GaAlAs-IR-Lumineszenzdiode GaAlAs Infrared Emitter

GaAlAs-IR-Lumineszenzdiode GaAlAs Infrared Emitter

Features ● Highly efficient GaAlAs LED ● Anode is electrically connected to the case ● High pulse power ● High reliability ● DIN humidity category in acc. with DIN 40040 GQG ● Same package as BPX 63, BP 103, LD 242, SFH 464 Applications ● IR remote controls and sound transmission ● Photoi

NPN high-voltage transistors

DESCRIPTION NPN transistors in a TO-92 plastic package. PNP complement: BF488 FEATURES • Low feedback capacitance. APPLICATIONS • Intended for use in video output stages in black-and-white and in colour television receivers.

Infrared Emitting Diode

■ Features 1. Narrow beam angle (∆θ : TYP. ± 13˚) 2. Radiant flux ( Φ e : MIN. 0.7mW at I F = 20mA) 3. Compact, high reliability by chip coating (GL480Q/GL483Q ) 4. Long lead type (GL483Q) ■ Applications 1. Copiers 2. Floppy disk drives 3. Optoelectronic switches

Silicon NPN Transistor RF Power Output for Mobile Use, PO = 18W @ 866MHz

Description: The NTE483 is a 12.5 Volt epitaxial silicon NPN planer transistor designed for primarily for 800MHz mobile communications. This device utilizes matched input technology (Tuned Q) to increase bandwidth and power gain over the complete range of 806–866MHz. Features: • Designe

Enhanced Low EMI Half-Duplex RS-485 Transceiver

DESCRIPTION The SP483E is a half-duplex transceiver that meets the specifications of RS-485 and RS-422 serial protocols with enhanced ESD performance. ■ +5V Only ■ Low Power BiCMOS ■ Driver/Receiver Enable for Multi-Drop configurations ■ Enhanced ESD Specifications: +15KV Human Body M

Enhanced Low EMI Half-Duplex RS-485 Transceiver

DESCRIPTION The SP483E is a half-duplex transceiver that meets the specifications of RS-485 and RS-422 serial protocols with enhanced ESD performance. ■ +5V Only ■ Low Power BiCMOS ■ Driver/Receiver Enable for Multi-Drop configurations ■ Enhanced ESD Specifications: +15KV Human Body M