4BIT MICROCONTROLLER

Description SD6830 is a remote control transmitter, consists of the optimized 4-bit CPU with ROM and RAM. It contains power-on reset, watchdog timer and carrier frequency generator. The SD6830 provide a various carrier frequency for encoding output of key matrix and has built-in transistor to dri

4BIT MICROCONTROLLER

Description\nSD6830 is a remote control transmitter, consists of the optimized 4-bit CPU with ROM and RAM. It contains power-on reset, watchdog timer and carrier frequency generator. The SD6830 provide a various carrier frequency for encoding output of key matrix and has built-in transistor to drive • Number of basic instructions ------------------------------------- 45\n• Instruction cycle time (one word instruction)\n   At Fsys=480KHz ---------------------------------------- 16.67uS\n   At Fsys=455kHz ---------------------------------------- 17.58uS\n· Memory size\n   ROM --------------------;

4BIT MICROCONTROLLER

Description SD6830 is a remote control transmitter, consists of the optimized 4-bit CPU with ROM and RAM. It contains power-on reset, watchdog timer and carrier frequency generator. The SD6830 provide a various carrier frequency for encoding output of key matrix and has built-in transistor to dri

DMC6830 Is A REMOTE CONTROL TRANSMITTER, CONSISTS OF THE OPTIMIZED 4-BIT CPU WITH ROM AND RAM

DMC6830 Is A REMOTE CONTROL TRANSMITTER, CONSISTS OF THE OPTIMIZED 4-BIT CPU WITH ROM AND RAM

Dual Ultra-Low-Voltage SOT23 關P Supervisors with Manual Reset and Watchdog Timer

General Description The MAX6826–MAX6831 are ultra-low-voltage microprocessor (µP) supervisory circuits designed to monitor two power supplies and have manual reset and watchdog input functions. These devices assert a system reset if any of the monitored supplies fall below the preprogrammed thres

Low Power Voltage Inverters With Shutdown

DESCRIPTION The SP6830/6831 devices are CMOS Charge Pump Voltage Inverters that can be implemented into designs which require a negative voltage from a battery voltage source as low as +1.15V or a power supply rail voltage as high as +5.3V. The SP6830/6831 devices are ideal for both battery-pow

Low Power Voltage Inverters With Shutdown

DESCRIPTION The SP6830/6831 devices are CMOS Charge Pump Voltage Inverters that can be implemented into designs which require a negative voltage from a battery voltage source as low as +1.15V or a power supply rail voltage as high as +5.3V. The SP6830/6831 devices are ideal for both battery-pow