Simple Boost PWM Controller with Input Disconnect FET Drive

The SC2604 is a versatile, low-cost, voltage-mode PWM controller designed for boost DC/DC power supply applications. ·Input Voltage Range: 4.5V to 13.5V\n·1% Voltage Reference Accuracy\n·Up to 95% Efficiency\n·Input Disconnect FET Drive\n·In-rush Current Control\n·Internal Compensation\n·Programmable Current Limit\n·Programmable Soft Start\n·800mA Typical PWM Gate Drive\n·400kHz Switching Frequency\n·Under;

Simple PWM Boost Controller with Input Disconnect FET Drive

文件：379.14 Kbytes Page：14 Pages

Simple PWM Boost Controller with Input Disconnect FET Drive

文件：379.14 Kbytes Page：14 Pages

Simple PWM Boost Controller with Input Disconnect FET Drive

文件：379.14 Kbytes Page：14 Pages

封装/外壳：8-TSSOP，8-MSOP（0.118"，3.00mm 宽） 功能：升压 包装：卷带（TR） 描述：IC REG CTRLR BOOST 8MSOP 集成电路（IC） PMIC - 稳压器 - DC DC 开关式控制器

封装/外壳：8-UFDFN 裸露焊盘 功能：升压 包装：管件 描述：IC REG CTRLR BOOST SMD 集成电路（IC） DC-DC 开关控制器

Remote Control Decoder IC

DESCRIPTION PT2604 is a tri-state remote control decoder IC utilizing CMOS Technology. It provides 10 address pins and 4 data pins. Code Format Compatible with HT604L, PT2604 is housed in 20 pins, DIP or SOP Package and supports the Latch Data Output Type. It may be paired with PT2607 to provid

Quad 10-Bit Serial Input Voltage Output DAC

DESCRIPTION The WM2604 is a quadruple 10-bit voltage output, resistor string, digital-to-analogue converter. Each DAC can be individually powered down under software control. A hardware controlled mode is provided that powers down all DACs. Power down reduces current consumption to 10nA. The dev

Quad 10-Bit Serial Input Voltage Output DAC

DESCRIPTION The WM2604 is a quadruple 10-bit voltage output, resistor string, digital-to-analogue converter. Each DAC can be individually powered down under software control. A hardware controlled mode is provided that powers down all DACs. Power down reduces current consumption to 10nA. The dev

Quad 10-Bit Serial Input Voltage Output DAC

DESCRIPTION The WM2604 is a quadruple 10-bit voltage output, resistor string, digital-to-analogue converter. Each DAC can be individually powered down under software control. A hardware controlled mode is provided that powers down all DACs. Power down reduces current consumption to 10nA. The dev

RF POWER AMPLIFIER

文件：286.36 Kbytes Page：8 Pages