2.5MHz, 2A Synchronous Step-Down Regulator

Features VIN Range: 2.9 – 5.5V VOUT Options: 0.8 - 3.3V Up to 2A Output Current Ultra-Small Footprint,

2.5MHz, 2A Synchronous Step Down Regulator

The SC183CQ is a 2A synchronous step-down regulator designed to operate with an input voltage range of 2.9 to 5.5 volts. The device offers fifteen pre-determined outputs voltages via four control pins programmable from 0.8 to 3.3 volts. The control pins allow for on-the-fly voltage changes, enabling • Input voltage range: 2.9 – 5.5V\n• Output current — up to 2A\n• 2.5MHz switching frequency\n• Low output noise across load range\n• Start up into pre-bias output\n• Shutdown current — <1μA\n• Input under-voltage lockout\n• Current limit protection\n• Adjustable output voltage\n• MLPQ-UT16 package\;

2.5MHz, 2A Synchronous Step-Down Regulator

Features VIN Range: 2.9 – 5.5V VOUT Options: 0.8 - 3.3V Up to 2A Output Current Ultra-Small Footprint,

2.5MHz, 2A Synchronous Step-Down Regulator

Features VIN Range: 2.9 – 5.5V VOUT Options: 0.8 - 3.3V Up to 2A Output Current Ultra-Small Footprint,

Amplifier Transistors(NPN)

Aplifier Transistors NPN Silicon

Silicon NPN Planar RF Transistor

Features ● Low power applications ● Low noise figure ● High transition frequency fT = 8 GHz Applications For low noise and high gain broadband amplifiers at collector currents from 2 mA to 30 mA.

Silicon NPN Planar RF Transistor

Features ● Low power applications ● Low noise figure ● High transition frequency fT = 8 GHz Applications For low noise and high gain broadband amplifiers at collector currents from 2 mA to 30 mA.

LATERAL N-CHANNEL BROADBAND RF POWER MOSFETs

Designed for broadband commercial and industrial applications at frequencies to 1.0 GHz. The high gain and broadband performance of these devices makes ithem ideal for large–signal, common source amplifier applications in 28 volt base station equipment. • Guaranteed Performance at 945 MHz, 28 Vol

Silicon Complementary Transistors General Purpose Amplifier, Switch

Description: The NTE182 (NPN) and NTE183 (PNP) are silicon transistors in a TO127 type case designed for use in general purpose amplifier and switching applications. Features: • DC Current Gain Specified to 10A • High Current Gain–Bandwidth Product: fT = 2MHz (Min) @ IC = 500mA