STEPPER MOTOR DRIVE CIRCUIT

STEPPER MOTOR DRIVE CIRCUIT

UNIVERSAL INDUSTRIAL LOGIC AND INTERFACE CIRCUIT

GENERAL DESCRIPTION The SAA1029 is a universal bipolar logic and interface IC with high noise immunity and operational stability for industrial control applications. The most fundamental industrial control functions can be accomplished with only one SAA1029 IC. MAIN ADVANTAGES • Simple

STEPPER MOTOR DRIVER

Stepper Motor Driver The SAA1042 drives a two–phase stepper motor in the bipolar mode. The device contains three input stages, a logic section and two output stages. The IC is contained in a 16 pin dual–in–line heat tab plastic package for improved heatsinking capability. The center four gr

STEPPER MOTOR DRIVER

Stepper Motor Driver The SAA1042 drives a two–phase stepper motor in the bipolar mode. The device contains three input stages, a logic section and two output stages. The IC is contained in a 16 pin dual–in–line heat tab plastic package for improved heatsinking capability. The center four gr

SUBCARRIER COUPLER

SUBCARRIER COUPLER

Radio tuning PLL frequency synthesizer

GENERAL DESCRIPTION The SAA1057 is a single chip frequency synthesizer IC in I2L technology, which performs all the tuning functions of a PLL radio tuning system. The IC is applicable to all types of radio receivers, e.g. car radios, hi-fi radios and portable radios. Features • On-chip

LED DISPLAY/INTERFACE CIRCUIT

OUTPUT PORT EXPANDER

[Signetics]

OUTPUT PORT EXPANDER

[Signetics]

4-digit LED-driver with I2C-Bus interface

GENERAL DESCRIPTION The LED-driver is a bipolar integrated circuit made in an I2L compatible 18 volts process. The circuit is especially designed to drive four 7-segment LED displays with decimal point by means of multiplexing between two pairs of digits. It features an I2C-Bus slave transceive

4-digit LED-driver with I2C-Bus interface

GENERAL DESCRIPTION The LED-driver is a bipolar integrated circuit made in an I2L compatible 18 volts process. The circuit is especially designed to drive four 7-segment LED displays with decimal point by means of multiplexing between two pairs of digits. It features an I2C-Bus slave transceive

Tone Ringer IC (14-Pin Plastic Package TO-116)

Tone Ringer IC (14-Pin Plastic Package TO-116) etc.

Tone Ringer IC (14-Pin Plastic Package TO-116)

Tone Ringer IC (14-Pin Plastic Package TO-116) etc.

MICROPROCESSOR CONTROLLED STEREO SOUND GENERATOR FOR SOUND EFFECTS AND MUSIC SYNTHESIS

Universal sync generator USG

GENERAL DESCRIPTION The SAA1101 is a Universal Sync Generator (USG) and is designed for application in video sources such as cameras, film scanners, video generators and associated apparatus. The circuit can be considered as a successor to the SAA1043 sync generator and the SAA1044 subcarrier cou

DC and AC Inputs – Solid-State Relay

• 15, 25, 40A @ 50-240 VAC Outputs • 4 to 32 VDC and 85 to 240 VAC Input • LED Operation Indicator (SD Only) • Compatible Heat Sinks HEAT SINK INFORMATION: To achieve the rated output current loads for all ATC solid-state relays, they must be mounted to a heat sink.

DC and AC Inputs – Solid-State Relay

• 15, 25, 40A @ 50-240 VAC Outputs • 4 to 32 VDC and 85 to 240 VAC Input • LED Operation Indicator (SD Only) • Compatible Heat Sinks HEAT SINK INFORMATION: To achieve the rated output current loads for all ATC solid-state relays, they must be mounted to a heat sink.

DC and AC Inputs – Solid-State Relay

• 15, 25, 40A @ 50-240 VAC Outputs • 4 to 32 VDC and 85 to 240 VAC Input • LED Operation Indicator (SD Only) • Compatible Heat Sinks HEAT SINK INFORMATION: To achieve the rated output current loads for all ATC solid-state relays, they must be mounted to a heat sink.

Infrared Remote-Control Transmitter IC

[ITT] Infrared Remote-Control Transmitter IC This integrated CMOS circuit has developed for infrared remote control of color TV receivers, but can also be used for other remote-control applications with advantage. It consumes a minimal current and, due to its large instruction repertoire, is hig

Tuner switching circuit

Introduction There is no soldering method that is ideal for all IC packages. Wave soldering is often preferred when through-hole and surface mounted components are mixed on one printed-circuit board. However, wave soldering is not always suitable for surface mounted ICs, or for printed-circuits w

On/off logic IC

GENERAL DESCRIPTION The SAA1305T is an on/off logic IC, intended for use in car radios to interface between a microcontroller and various input signals such as ignition, low supply detection, on/off key and external control signals. The SAA1305T can replace an existing on/off logic built-up wit

Control interface for VHS video recorders

GENERAL DESCRIPTION The SAA1310 provides an interface between the tape control head in the VHS deck-electronics. The circuit also includes an interface between sensors in the deck mechanics and the microprocessor. FEATURES • Full support of VISS and VASS mode (VHS Index/Address Search System)

Control interface for VHS video recorders

GENERAL DESCRIPTION The SAA1310 provides an interface between the tape control head in the VHS deck-electronics. The circuit also includes an interface between sensors in the deck mechanics and the microprocessor. FEATURES • Full support of VISS and VASS mode (VHS Index/Address Search System)

Battery charge level indicator

GENERAL DESCRIPTION The SAA1501T is intended to be used as a battery monitor and charge current control circuit in rechargeable battery systems. FEATURES • High level of integration to allow assembly in intelligent battery packs • Accurate charge and discharge account • Large dynamic range of

Battery charge level indicator

GENERAL DESCRIPTION The SAA1501T is intended to be used as a battery monitor and charge current control circuit in rechargeable battery systems. FEATURES • High level of integration to allow assembly in intelligent battery packs • Accurate charge and discharge account • Large dynamic range of

Safety IC for Li-ion

GENERAL DESCRIPTION The SAA1502ATS is manufactured in a Bipolar, CMOS and DMOS (BCD) Power Logic 70 process and is intended to be used as a protection circuit for single cell Li-ion battery packs. The current and voltage ratings are especially designed for use in battery packs for portable teleph

Safety IC

GENERAL DESCRIPTION The SAA1504T is manufactured in a BCD Power Logic 70 process and is intended to be used as a protection circuit for single cell Li-ion battery packs. The current and voltage ratings are especially designed for use in battery packs for portable telephones such as GSM. FEATURES

Fast Avalanche Diodes

Surface mount diode Forward Current: 1 A Reverse Voltage: 50 to 1000 V Features • Max. solder temperature: 260°C • Plastic meaterial has UL classification 94V-0

Fast Avalanche Diodes

Surface mount diode Forward Current: 1 A Reverse Voltage: 50 to 1000 V Features • Max. solder temperature: 260°C • Plastic meaterial has UL classification 94V-0

Fast Avalanche Diodes

Surface mount diode Forward Current: 1 A Reverse Voltage: 50 to 1000 V Features • Max. solder temperature: 260°C • Plastic meaterial has UL classification 94V-0

Fast Avalanche Diodes

Surface mount diode Forward Current: 1 A Reverse Voltage: 50 to 1000 V Features • Max. solder temperature: 260°C • Plastic meaterial has UL classification 94V-0

Global Positioning System GPS baseband processor

GENERAL DESCRIPTION The SAA1575HL is an integrated circuit which implements a complete baseband function for Global Positioning System (GPS) receivers. It combines a 16-bit Philips 80C51XA microcontroller, 8 GPS channel correlators and related peripherals in a single IC. Users can implement a com

Fast Avalanche Diodes

Surface mount diode Forward Current: 1 A Reverse Voltage: 50 to 1000 V Features • Max. solder temperature: 260°C • Plastic meaterial has UL classification 94V-0

Fast Avalanche Diodes

Surface mount diode Forward Current: 1 A Reverse Voltage: 50 to 1000 V Features • Max. solder temperature: 260°C • Plastic meaterial has UL classification 94V-0

Fast Avalanche Diodes

Surface mount diode Forward Current: 1 A Reverse Voltage: 50 to 1000 V Features • Max. solder temperature: 260°C • Plastic meaterial has UL classification 94V-0

Universal Industrial Logic And Interface Circuit

UNIVERSAL INDUSTRIAL LOGIC AND INTERFACE CIRCUIT

文件：160.99 Kbytes Page：3 Pages

STEPPER MOTOR DRIVER

Radio tuning PLL frequency synthesizer

Smart, simple solutions for the 12 most common design concerns

4-digit LED-driver with I2C-Bus interface

封装/外壳：24-SOIC（0.295"，7.50mm 宽） 包装：管件 描述：IC DRVR 7 SEGMENT 4 DIGIT 24SO 集成电路（IC） 显示驱动器

封装/外壳：24-SOIC（0.295"，7.50mm 宽） 包装：管件 描述：IC DRVR 7 SEGMENT 4 DIGIT 24SO 集成电路（IC） 显示驱动器

4-digit LED-driver with I2C-Bus interface

Precision Metal Film Resistors

文件：159.69 Kbytes Page：1 Pages

Fast Avalanche Diodes

文件：188.18 Kbytes Page：2 Pages

Fast Avalanche Diodes

文件：188.18 Kbytes Page：2 Pages

Fast Avalanche Diodes

文件：188.18 Kbytes Page：2 Pages

Fast Avalanche Diodes

文件：188.18 Kbytes Page：2 Pages

Fast Avalanche Diodes

文件：188.18 Kbytes Page：2 Pages

Fast Avalanche Diodes

文件：188.18 Kbytes Page：2 Pages

Fast Avalanche Diodes

文件：188.18 Kbytes Page：2 Pages

Fast Avalanche Diodes

文件：188.18 Kbytes Page：2 Pages

DOUBLE DATA RATE (DDR) SDRAM

文件：256.24 Kbytes Page：13 Pages

DOUBLE DATA RATE (DDR) SDRAM

文件：256.24 Kbytes Page：13 Pages