500 WATT PEAK POWER TRANSIENT VOLTAGE SUPPRESSORS

FEATURES * 500 Watts Surge Capability at 1ms * Excellent clamping capability * Low zener impedance * Fast response time: Typically less than 1.0ps from 0 volt to BV min. * Typical IR less than 1mA above 10V * High temperature soldering guaranteed: 260 °C / 10 seconds / .375(9.5mm) lead lengt

TECHNICAL SPECIFICATIONS OF TRANSIENT VOLTAGE SUPPRESSOR

FEATURES * Glass passivated junction * 500 Watts Peak Pulse Power capability on 10/1000 µs waveform * Excellent clamping capability * Low zener impedance * Fast response time

500W TRANSIENT VOLTAGE SUPPRESSOR

Features • Constructed with Glass Passivated Die • Excellent Clamping Capability • 500W Peak Pulse Power Dissipation • Fast Response Time • 100 Tested at Rated Peak Pulse Power • Voltage Range 5.0 - 170 Volts • Unidirectional and Bi-directional Versions Available (Note 1) • Available in Le

5.0 thru 170 volts 500 Watts Transient Voltage Suppressors

DESCRIPTION: This Transient Voltage Suppressor is an economical, molded, commercial product used to protect voltage sensitive components from destruction or partial degradation. The response time of their clamping action is virtually instantaneous (1 x 10-12 seconds) and they have a peak pulse po

Transient Voltage Suppressors

Features • Glass passivated junction. • 500W Peak Pulse Power capability on 10/1000 µs waveform. • Excellent clamping capability. • Low incremental surge resistance. • Fast response time; typically less than 1.0 ps from 0 volts to BV for unidirectional and 5.0 ns for bidirectional. • Typical

MOSORB ZENER OVERVOLTAGE TRANSIENT SUPPRESSORS

The SA5.0A series is designed to protect voltage sensitive components from high voltage, high energy transients. They have excellent clamping capability, high surge capability, low zener impedance and fast response time. The SA5.0A series is supplied in Motorola’s exclusive, cost-effective, highly

GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR(VOLTAGE - 5.0 TO 170 Volts 500 Watt Peak Pulse Power)

FEATURES • Plastic package has Underwriters Laboratory Flammability Classification 94V-O • Glass passivated chip junction in DO-15 package • 500W surge capability at 1ms • Excellent clamping capability • Low zener impedance • Fast response time: typically less than 1.0 ps from 0 volts to BV

DEVICES FOR BIPOLAR APPLICATIONS

Features • Glass passivated junction. • 500W Peak Pulse Power capability on 10/1000 µs waveform. • Excellent clamping capability. • Low incremental surge resistance. • Fast response time; typically less than 1.0 ps from 0 volts to BV for unidirectional and 5.0 ns for bidirectional. • Typical

GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR

VOLTAGE POWER 5.0 to 220 Volts 500 Watts FEATURES • Plastic package has Underwriters Laboratory Flammability Classification 94V-O • Glass passivated chip junction in DO-15 package • 500W surge capability at 1ms • Excellent clamping capability • Low zener impedance • Fast response time:

5.0V to 170V GPP TRANSIENT VOLTAGE SUPPRESSORS

Features ■ 500 WATT PEAK POWER PROTECTION ■ EXCELLENT CLAMPING CAPABILITY ■ FAST RESPONSE TIME ■ TYPICAL IR

TRANSIENT VOLTAGE SUPPRESSOR

BREAKDOWN VOLTAGE: 5.0 --- 170 V PEAK PULSE POWER: 500 W FEATURES ◇ Plastic package gas Underwriters Laboratory Flammability Classification 94V-0 ◇ Glass passivated junction ◇ 500W peak pulse power capability with a 10/1000µs waveform, repetition rate (duty cycle): 0.01 ◇ Excellent c

SILICON BIDIRECTIONAL DIACS

Features * 500W Peak pulse power capability * Excellent clamping capability * Low incremental surge resistance * Fast response time:Typically less than 1.0ps from 0v to VBR for unidirection and 5.0 ns for bidirectional types.

TRANSIENT VOLTAGE SUPPRESSOR

Stand-off Zener Voltage Range 5.0 - 170 Volts PPK : 500 Watts FEATURES : * 500W surge capability at 1ms * Excellent clamping capability * Low zener impedance * Fast response time : typically less then 1.0 ps from 0 volt to VBR(min.) * Typical IR less then 1mA above 10V * Pb / RoHS Free

TRANSZORB® Transient Voltage Suppressors

FEATURES • Glass passivated chip junction • Available in uni-directional and bi-directional • 500 W peak pulse power capability with a 10/1000 µs waveform, repetitive rate (duty cycle): 0.01 • Excellent clamping capability • Very fast response time • Low incremental surge resistance • Sold

Transient Voltage Suppressors

Peak Pulse Power 500W Stand Off Voltage 5.0 to 180V Features ◆ Plastic package has Underwriters Laboratory Flammability Classification 94V-0 ◆ Glass passivated junction ◆ Excellent clamping capability ◆ Low incremental surge resistance ◆ Very fast response time ◆ 500W peak pulse power s

GLASS PASSIVAED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR

Breakdown Voltage:5.0-170CA Volts Pesk Pulse Power:500 Watts FEATURE ♦ 500w peak pulse power capability ♦ Excellent clamping capability ♦ Low incremental surge resistance ♦ Fast response time:typically less than 1.0ps from 0v to VBR for unidirectional and 5.0ns ror bidirectional types. ♦ Hig

GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR

VOLTAGE 6.8 to 144 VOLTS 400 WATT PEAK POWER 1.0 WATTS STEADY STATE FEATURES • Plastic package has Underwrites Laboratory Flammability Classification 94V-O • Glass passivated chip junction • 500W Peak Pulse Power capability on 10/1000μs waveform • Excellent clamping capability • Repe

POWER 500Watts VOLTAGE 5.0 to 170 Volts

Features • Plastic package has Underwriters Laboratory flammability classification 94V-0 • Glass passivated junction • 500W peak pulse power surge capability with a 10/100μS waveform, repetition rate(duty cycle) : 0.01 • Excellent clamping capability • Low incremental surge resistance

Silicon Avalanche Diodes - 500 Watt Axial Leaded Transient Voltage Suppressors

Description The SA Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features • 500W peak pulse capability at 10/1000μs waveform, repetition rate (duty cycles):0.01 • VBR @ TJ= VBR@25°C

500 WATT PEAK POWER TRANSIENT VOLTAGE SUPPRESSORS

VOLTAGE RANGE 5.0 to 180 Volts 500 Watts Peak Power 3.0 Watts Steady State FEATURES * 500 Watts Surge Capability at 1ms * Excellent clamping capability * Fast response time: Typically less than 1.0ps from 0 volt to BV min. * Low zener impedance * Typical IR less than 1 A above 10Vz * High t

GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR

VOLTAGE-5.0 TO 180.0 Volts 500 Watt Peak Pulse Power FEATURES • Plastic package has Underwriters Laboratory Flammability Classification 94 V-O • Glass passivated junction • 500W Peak Pulse Power capability on 10/1000 µs waveform • Glass passivated junction • Low incremental surge re

GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR VOLTAGE - 5.0 TO 170 Volts

VOLTAGE - 5.0 TO 170 Volts 500Watt Peak Power 3.0 Watt Steady State Feature * Plastic package has Underwriters Laboratory Flammability Classification 94V-O * Glass passivated chip junction in DO-15 package * 500W surge capability at 1ms * Excellent clamping capability * Low zener impedan

TRANSZORB Transient Voltage Suppressors

FEATURES • Glass passivated chip junction • Available in uni-directional and bi-directional • 500 W peak pulse power capability with a 10/1000 µs waveform, repetitive rate (duty cycle): 0.01 • Excellent clamping capability • Very fast response time • Low incremental surge resistance • Sold

Axial Lead Transient Voltage Suppressors (TVS)

Description The SA series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features ♦ Glass passivated chip junction in DO-15 Package ♦ Low leakage ♦ Uni and Bidirectional unit ♦ Excellent clam

TRANSZORB Transient Voltage Suppressors

FEATURES • Glass passivated chip junction • Available in uni-directional and bi-directional • 500 W peak pulse power capability with a 10/1000 µs waveform, repetitive rate (duty cycle): 0.01 • Excellent clamping capability • Very fast response time • Low incremental surge resistance • Sold

500W Transient Voltage Suppressor

Features ◇ Constructed with Glass Passivated Die ◇ Excellent Clamping Capability ◇ 500W Peak Pulse Power Dissipation ◇ Fast Response Time 100 Tested at Rated Peak Pulse Power ◇ Voltage Range 5.0 - 170 Volts ◇ Unidirectional and Bi-directional Versions ◇ Available (Note 1)

TRANSZORB Transient Voltage Suppressors

FEATURES • Glass passivated chip junction • Available in uni-directional and bi-directional • 500 W peak pulse power capability with a 10/1000 µs waveform, repetitive rate (duty cycle): 0.01 • Excellent clamping capability • Very fast response time • Low incremental surge resistance • Sold

Axial Lead Transient Voltage Suppressors (TVS)

Description The SA series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features ♦ Glass passivated chip junction in DO-15 Package ♦ Low leakage ♦ Uni and Bidirectional unit ♦ Excellent clam

TRANSZORB Transient Voltage Suppressors

FEATURES • Glass passivated chip junction • Available in uni-directional and bi-directional • 500 W peak pulse power capability with a 10/1000 µs waveform, repetitive rate (duty cycle): 0.01 • Excellent clamping capability • Very fast response time • Low incremental surge resistance • Sold

TRANSZORB Transient Voltage Suppressors

FEATURES • Glass passivated chip junction • Available in uni-directional and bi-directional • 500 W peak pulse power capability with a 10/1000 µs waveform, repetitive rate (duty cycle): 0.01 • Excellent clamping capability • Very fast response time • Low incremental surge resistance • Sold

GLASS PASSIVAED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR

Breakdown Voltage:5.0-170CA Volts Pesk Pulse Power:500 Watts FEATURE ◆ 500w peak pulse power capability ◆ Excellent clamping capability ◆ Low incremental surge resistance ◆ Fast response time:typically less than 1.0ps from 0v to VBR for unidirectional and 5.0ns ror bidirectional types. ◆

Transient Voltage Suppressors

FEATURES ◇ Plastic Sackage. ◇ Glass passivated chip junction. ◇ 500W Peak Pulse Power capability on 10/1000µs waveform. ◇ Excellent clamping capability. ◇ Repetition rate (duty cycle): 0.01. ◇ Low incremental surge resistance. ◇ Fast response time: typically less than 1.0ps from 0 volt to B

500W, 5V - 170V Transient Voltage Suppressor

FEATURES ● AEC-Q101 qualified available ● Excellent clamping capability ● Low impedance surge resistance ● 500W surge capability at 10/1000μs waveform ● Fast response time: Typically less than 1.0ps from 0 volt to VBR for unidirectional and 5.0ns for bidirectional ● Typical IR less than 1μA

FEATURES Voltage Suppressor Diodes

FEATURES Excellent clamping capability Low dynamic impedance Solder dip 275 °C max. 7 s, per JESD 22-B106

5.0 To 190V 500W Axial Lead Transient Voltage Suppressors (TVS)

Features Glass passivated chip junction in DO-15 Package Low leakage Uni and Bidirectional unit Excellent clamping capability 500W Peak power capability at 10 × 1000μs waveform Repetition rate (duty cycle):0.01% Fast response time: typically less than 1.0ps from 0 Volts to VBR min Typi

TRANSIENT VOLTAGE SUPPRESSOR

Glass Passivated Die Construction 500W Peak Pulse Power Dissipation 5V- 170V Standoff Voltage Uni- and Bi-Directional Versions Available Excellent Clamping Capability Fast Response Time Plastic Case Material has UL Flammability Classification Rating 94V-O This is a Pb − Free Device All SM

500W Transient Voltage Suppressor

Features ♦ Constructed with Glass Passivated Die ♦ Excellent Clamping Capability ♦ 500W Peak Pulse Power Dissipation ♦ Fast Response Time 100% Tested at Rated Peak Pulse Power ♦ Voltage Range 5.0 - 170 Volts ♦ Unidirectional and Bi-directional Versions ♦ Available (Note 1)

Transient Voltage Suppressors (TVS)

Features ■ Glass passivated junction ■ Low inductance ■ Excellent clamping capability ■ 500W peak pulse power capability at 10/1000μs waveform, repetition rate (duty cycle): 0.01% ■ Fast response time ■ Typical IR less than 1μA above 10V ■ High Temperature soldering guaranteed: 265℃/10

Transient Voltage Suppressors

Features • Glass passivated junction. • 500W Peak Pulse Power capability on 10/1000 μs waveform. • Excellent clamping capability. • Low incremental surge resistance. • Fast response time; typically less than 1.0 ps from 0 volts to BV for unidirectional and 5.0 ns for bidirectional. • Typical

500W 58V TVS transient suppressor diode

文件：573.51 Kbytes Page：5 Pages

AXIAL LEADED TRANSIENT VOLTAGE SUPPRESSOR

文件：573.807 Kbytes Page：5 Pages

Transient Voltage Suppressor

文件：234.89 Kbytes Page：6 Pages

TRANSZORB® Transient Voltage Suppressors

文件：96.34 Kbytes Page：6 Pages

500 Watts Axial Leaded Transient Voltage Suppressors

文件：223.48 Kbytes Page：4 Pages

GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR POWER 500 Watts

文件：131.64 Kbytes Page：6 Pages

500 Watts Transient Voltage Suppressor

文件：320.48 Kbytes Page：7 Pages

Glass Passivated Junction Transient Voltage Suppressor Stand-Off Voltage - 5.0 to 180 Volts 500 Watt Peak Pulse Power

文件：323.93 Kbytes Page：6 Pages

TVS Diode Products

文件：3.3173 Mbytes Page：146 Pages

Transient Voltage Suppressor

文件：331.1 Kbytes Page：4 Pages

Transient Voltage Suppressors

文件：848.1 Kbytes Page：7 Pages

GLASS PASSIVAED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR

文件：479.9 Kbytes Page：3 Pages

Transient Voltage Suppressors Diodes

文件：689.56 Kbytes Page：5 Pages

SA Transient Voltage Suppressor Diode Series

文件：843.02 Kbytes Page：5 Pages

Axial Lead Transient Voltage Suppressors

文件：646.25 Kbytes Page：6 Pages

Surface Mount Transient Voltage Suppressors (TVS)

文件：3.90527 Mbytes Page：56 Pages

GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR STAND-OFF VOLTAGE - 5.0 TO 180 Volts

文件：918.5 Kbytes Page：3 Pages

Transient Voltage Suppressor Diodes

文件：191.44 Kbytes Page：5 Pages

Low zener impedance

文件：216.05 Kbytes Page：5 Pages

500 Watts Transient Voltage Suppressor Diodes

文件：645.66 Kbytes Page：5 Pages

Transient Voltage Suppressor Diodes

文件：105.33 Kbytes Page：5 Pages