GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR(VOLTAGE - 5.0 TO 170 Volts 500 Watt Peak Pulse Power)

FEATURES • Plastic package has Underwriters Laboratory Flammability Classification 94V-O • Glass passivated chip junction in DO-15 package • 500W surge capability at 1ms • Excellent clamping capability • Low zener impedance • Fast response time: typically less than 1.0 ps from 0 volts to BV

500 WATT PEAK POWER TRANSIENT VOLTAGE SUPPRESSORS

FEATURES * 500 Watts Surge Capability at 1ms * Excellent clamping capability * Low zener impedance * Fast response time: Typically less than 1.0ps from 0 volt to BV min. * Typical IR less than 1mA above 10V * High temperature soldering guaranteed: 260 °C / 10 seconds / .375(9.5mm) lead lengt

5.0 thru 170 volts 500 Watts Transient Voltage Suppressors

DESCRIPTION: This Transient Voltage Suppressor is an economical, molded, commercial product used to protect voltage sensitive components from destruction or partial degradation. The response time of their clamping action is virtually instantaneous (1 x 10-12 seconds) and they have a peak pulse po

5.0V to 170V GPP TRANSIENT VOLTAGE SUPPRESSORS

Features ■ 500 WATT PEAK POWER PROTECTION ■ EXCELLENT CLAMPING CAPABILITY ■ FAST RESPONSE TIME ■ TYPICAL IR

GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR

VOLTAGE POWER 5.0 to 220 Volts 500 Watts FEATURES • Plastic package has Underwriters Laboratory Flammability Classification 94V-O • Glass passivated chip junction in DO-15 package • 500W surge capability at 1ms • Excellent clamping capability • Low zener impedance • Fast response time:

POWER 500Watts VOLTAGE 5.0 to 170 Volts

Features • Plastic package has Underwriters Laboratory flammability classification 94V-0 • Glass passivated junction • 500W peak pulse power surge capability with a 10/100μS waveform, repetition rate(duty cycle) : 0.01 • Excellent clamping capability • Low incremental surge resistance

TRANSIENT VOLTAGE SUPPRESSOR

BREAKDOWN VOLTAGE: 5.0 --- 170 V PEAK PULSE POWER: 500 W FEATURES ◇ Plastic package gas Underwriters Laboratory Flammability Classification 94V-0 ◇ Glass passivated junction ◇ 500W peak pulse power capability with a 10/1000µs waveform, repetition rate (duty cycle): 0.01 ◇ Excellent c

SILICON BIDIRECTIONAL DIACS

Features * 500W Peak pulse power capability * Excellent clamping capability * Low incremental surge resistance * Fast response time:Typically less than 1.0ps from 0v to VBR for unidirection and 5.0 ns for bidirectional types.

500 WATT PEAK POWER TRANSIENT VOLTAGE SUPPRESSORS

VOLTAGE RANGE 5.0 to 180 Volts 500 Watts Peak Power 3.0 Watts Steady State FEATURES * 500 Watts Surge Capability at 1ms * Excellent clamping capability * Fast response time: Typically less than 1.0ps from 0 volt to BV min. * Low zener impedance * Typical IR less than 1 A above 10Vz * High t

Transient Voltage Suppressors

Peak Pulse Power 500W Stand Off Voltage 5.0 to 180V Features ◆ Plastic package has Underwriters Laboratory Flammability Classification 94V-0 ◆ Glass passivated junction ◆ Excellent clamping capability ◆ Low incremental surge resistance ◆ Very fast response time ◆ 500W peak pulse power s

TRANSZORB® Transient Voltage Suppressors

FEATURES • Glass passivated chip junction • Available in uni-directional and bi-directional • 500 W peak pulse power capability with a 10/1000 µs waveform, repetitive rate (duty cycle): 0.01 • Excellent clamping capability • Very fast response time • Low incremental surge resistance • Sold

GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR

VOLTAGE 6.8 to 144 VOLTS 400 WATT PEAK POWER 1.0 WATTS STEADY STATE FEATURES • Plastic package has Underwrites Laboratory Flammability Classification 94V-O • Glass passivated chip junction • 500W Peak Pulse Power capability on 10/1000μs waveform • Excellent clamping capability • Repe

TECHNICAL SPECIFICATIONS OF TRANSIENT VOLTAGE SUPPRESSOR

FEATURES * Glass passivated junction * 500 Watts Peak Pulse Power capability on 10/1000 µs waveform * Excellent clamping capability * Low zener impedance * Fast response time

TRANSIENT VOLTAGE SUPPRESSOR

Stand-off Zener Voltage Range 5.0 - 170 Volts PPK : 500 Watts FEATURES : * 500W surge capability at 1ms * Excellent clamping capability * Low zener impedance * Fast response time : typically less then 1.0 ps from 0 volt to VBR(min.) * Typical IR less then 1mA above 10V * Pb / RoHS Free

GLASS PASSIVAED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR

Breakdown Voltage:5.0-170CA Volts Pesk Pulse Power:500 Watts FEATURE ♦ 500w peak pulse power capability ♦ Excellent clamping capability ♦ Low incremental surge resistance ♦ Fast response time:typically less than 1.0ps from 0v to VBR for unidirectional and 5.0ns ror bidirectional types. ♦ Hig

Axial Lead Transient Voltage Suppressors (TVS)

Description The SA series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features ♦ Glass passivated chip junction in DO-15 Package ♦ Low leakage ♦ Uni and Bidirectional unit ♦ Excellent clam

500W Transient Voltage Suppressor

Features ◇ Constructed with Glass Passivated Die ◇ Excellent Clamping Capability ◇ 500W Peak Pulse Power Dissipation ◇ Fast Response Time 100 Tested at Rated Peak Pulse Power ◇ Voltage Range 5.0 - 170 Volts ◇ Unidirectional and Bi-directional Versions ◇ Available (Note 1)

Axial Lead Transient Voltage Suppressors (TVS)

Description The SA series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features ♦ Glass passivated chip junction in DO-15 Package ♦ Low leakage ♦ Uni and Bidirectional unit ♦ Excellent clam

GLASS PASSIVAED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR

Breakdown Voltage:5.0-170CA Volts Pesk Pulse Power:500 Watts FEATURE ◆ 500w peak pulse power capability ◆ Excellent clamping capability ◆ Low incremental surge resistance ◆ Fast response time:typically less than 1.0ps from 0v to VBR for unidirectional and 5.0ns ror bidirectional types. ◆

FEATURES Voltage Suppressor Diodes

FEATURES Excellent clamping capability Low dynamic impedance Solder dip 275 °C max. 7 s, per JESD 22-B106

5.0 To 190V 500W Axial Lead Transient Voltage Suppressors (TVS)

Features Glass passivated chip junction in DO-15 Package Low leakage Uni and Bidirectional unit Excellent clamping capability 500W Peak power capability at 10 × 1000μs waveform Repetition rate (duty cycle):0.01 Fast response time: typically less than 1.0ps from 0 Volts to VBR min Typical I

500W, 5V - 170V Transient Voltage Suppressor

FEATURES ● AEC-Q101 qualified available ● Excellent clamping capability ● Low impedance surge resistance ● 500W surge capability at 10/1000μs waveform ● Fast response time: Typically less than 1.0ps from 0 volt to VBR for unidirectional and 5.0ns for bidirectional ● Typical IR less than 1μA

GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR VOLTAGE - 5.0 TO 170 Volts

VOLTAGE - 5.0 TO 170 Volts 500Watt Peak Power 3.0 Watt Steady State Feature * Plastic package has Underwriters Laboratory Flammability Classification 94V-O * Glass passivated chip junction in DO-15 package * 500W surge capability at 1ms * Excellent clamping capability * Low zener impedan

Surface Mount Transient Voltage Suppressors (TVS)

文件：3.90527 Mbytes Page：56 Pages

GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR POWER 500 Watts

文件：131.64 Kbytes Page：6 Pages

Axial Lead Transient Voltage Suppressors

文件：646.25 Kbytes Page：6 Pages

500 Watts Transient Voltage Suppressor

文件：320.48 Kbytes Page：7 Pages

Transient Voltage Suppressor

文件：234.89 Kbytes Page：6 Pages

TRANSIENT VOLTAGE SUPPRESSOR

文件：226.13 Kbytes Page：3 Pages

GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR POWER

文件：103.92 Kbytes Page：4 Pages

500 Watts Transient Voltage Suppressor

文件：667.73 Kbytes Page：5 Pages

Transient Voltage Suppressor Diodes

文件：191.44 Kbytes Page：5 Pages

Transient Voltage Suppressor

文件：331.1 Kbytes Page：4 Pages

500W TRANSIENT VOLTAGE SUPPRESSOR

文件：82.58 Kbytes Page：6 Pages

Transient Voltage Suppressor Diodes

文件：105.33 Kbytes Page：5 Pages

500 Watts Transient Voltage Suppressor Diodes

文件：645.66 Kbytes Page：5 Pages

TRANSIENT VOLTAGE SUPPRESSOR

文件：52.06 Kbytes Page：4 Pages

500W TRANSIENT VOLTAGE SUPPRESSORS

文件：68.13 Kbytes Page：5 Pages

封装/外壳：DO-204AC，DO-15，轴向 包装：卷带（TR） 描述：TVS DIODE 58VWM 98.28VC DO204AC 电路保护 TVS - 二极管

500W TRANSIENT VOLTAGE SUPPRESSOR

PRODUCT FEATURES 1. FLAMMABILITY CLASSIFICATION 94V-0 2. GLASS PASSIVATED CHIP JUNCTION 3. 500W PEAK PULSE POWER CAPABILITY WITH A 10/1000 µS WAVEFORM, REPETITION RATE (DUTY CYCLE): 0.01. 4. EXCELLENT CLAMPING CAPABILITY 5. FAST RESPONSE TIME FROM 0V TO VBR, TYPICALLY

500W TRANSIENT VOLTAGE SUPPRESSOR

PRODUCT FEATURES 1. FLAMMABILITY CLASSIFICATION 94V-0 2. GLASS PASSIVATED CHIP JUNCTION 3. 500W PEAK PULSE POWER CAPABILITY WITH A 10/1000 µS WAVEFORM, REPETITION RATE (DUTY CYCLE): 0.01. 4. EXCELLENT CLAMPING CAPABILITY 5. FAST RESPONSE TIME FROM 0V TO VBR, TYPICALLY

500W TRANSIENT VOLTAGE SUPPRESSOR

FEATURES ● PLASTIC PACKAGE HAS UNDERWRITERS LABORATORY FLAMMABILITY CLASSIFICATION 94V-0 ● 500W PEAK PULSE POWER CAPABILITY ON 10/1000μs WAVEFORM ● EXCELLENT CLAMPING CAPABILITY ● REPETITION RATE (DUTY CYCLE):0.01 ● LOW INCREMENTAL SURGE RESISTANCE ● FAST RESPONSE TIME: TYPICALLY LESS THAN 1

500W TRANSIENT VOLTAGE SUPPRESSOR

FEATURES ● PLASTIC PACKAGE HAS UNDERWRITERS LABORATORY FLAMMABILITY CLASSIFICATION 94V-0 ● 500W PEAK PULSE POWER CAPABILITY ON 10/1000μs WAVEFORM ● EXCELLENT CLAMPING CAPABILITY ● REPETITION RATE (DUTY CYCLE):0.01 ● LOW INCREMENTAL SURGE RESISTANCE ● FAST RESPONSE TIME: TYPICALLY LESS THAN 1

5CHANNAL CD/DVD MOTOR DRIVER WITH POWER DOWN CONTROL

DESCRIPTION The SA5810 is a 5-channel motor driver for CD/CD-ROM/VCD/DVD system. It is composed of 2-CH BTL driver with 2-input OPAMP, 2-CH BTL driver and 1-CH forward/reverse controlled DC motor driver. Built-in power save controller can reduce the power consumption. FEATURES * Built-i

High precision operational amplifier, comparator, and voltage reference

GENERAL DESCRIPTION The SA58603 is comprised of a low voltage, high precision dual operational amplifier, a comparator, and a reference voltage source. The input offset voltage is typically 100 µV with a very low temperature drift of ±1 µV/°C. The SA58603 supply current is typically 100 µA per am

High precision operational amplifier, comparator, and voltage reference

GENERAL DESCRIPTION The SA58603 is comprised of a low voltage, high precision dual operational amplifier, a comparator, and a reference voltage source. The input offset voltage is typically 100 µV with a very low temperature drift of ±1 µV/°C. The SA58603 supply current is typically 100 µA per am

3 W BTL audio amplifier

General description The SA58631 is a one channel audio amplifier in a HVSON8 package. It provides power output of 3 W with a 8Ωload at 9 V supply. The internal circuit is comprised of a BTL (Bridge Tied Load) amplifier with a complementary PNP-NPN output stage and standby/mute logic. The SA5863

3 W BTL audio amplifier

3 W BTL audio amplifier

General description The SA58631 is a one channel audio amplifier in a HVSON8 package. It provides power output of 3 W with a 8Ωload at 9 V supply. The internal circuit is comprised of a BTL (Bridge Tied Load) amplifier with a complementary PNP-NPN output stage and standby/mute logic. The SA5863

3 W BTL audio amplifier

2 x 2.2 W BTL audio amplifier

General description The SA58632 is a two-channel audio amplifier in an HVQFN20 package. It provides power output of 2.2 W per channel with an 8 Ω load at 9 V supply. The internal circuit is comprised of two BTL (Bridge-Tied Load) amplifiers with a complementary PNP-NPN output stage and standby/mu

2 x 2.2 W BTL audio amplifier

General description The SA58632 is a two-channel audio amplifier in an HVQFN20 package. It provides power output of 2.2 W per channel with an 8 Ω load at 9 V supply. The internal circuit is comprised of two BTL (Bridge-Tied Load) amplifiers with a complementary PNP-NPN output stage and standby/mu

2 X 2.2 W BTL audio amplifier

2 X 2.2 W BTL audio amplifier

High performance mixer FM IF system with high-speed RSSI

DESCRIPTION The SA58641 is a high performance monolithic FM IF system with high-speed RSSI incorporating a mixer/oscillator, two limiting intermediate frequency amplifiers, quadrature detector, logarithmic received signal strength indicator (RSSI), voltage regulator, wideband data output and fast

High performance mixer FM IF system with high-speed RSSI

DESCRIPTION The SA58641 is a high performance monolithic FM IF system with high-speed RSSI incorporating a mixer/oscillator, two limiting intermediate frequency amplifiers, quadrature detector, logarithmic received signal strength indicator (RSSI), voltage regulator, wideband data output and fast

Excellent overload capability

General description The SA58643 is a wideband RF switch fabricated in BiCMOS technology and incorporating on-chip CMOS/TTL compatible drivers. Its primary function is to switch signals in the frequency range DC to 1 GHz from one 50 Ω channel to another. The switch is activated by a CMOS/TTL com

UHF 900 MHz transceiver IC

UHF 900 MHz transceiver IC

2.1 W/channel stereo class-D audio amplifier