8.0A SURFACE MOUNT SCHOTTKY BARRIER DIODE

Low Forward Voltage Epitaxial Construction with Oxide Passivation Guard Ring for Transient and ESD Protection Surge Overload Rating to 150A Peak Low Power Loss Fast Switching Ideally Suited for Use in High Frequency SMPS, Inverters and As Free Wheeling Diodes

丝印代码：S810B；Surface Mount Schottky Barrier Rectifier

文件：924.35 Kbytes Page：3 Pages

LED驱动及闪灯IC

\n

8.0A SURFACE MOUNT SCHOTTKY BARRIER DIODE

Low Forward Voltage Epitaxial Construction with Oxide Passivation Guard Ring for Transient and ESD Protection Surge Overload Rating to 150A Peak Low Power Loss Fast Switching Ideally Suited for Use in High Frequency SMPS, Inverters and As Free Wheeling Diodes

SMT CABLE CLIP 01.0mm IN TAPE & REEL

文件：116.01 Kbytes Page：1 Pages

包装：散装 描述：CBL CLIP C-TYPE SILVER SOLDER 电缆，电线 - 管理 电缆支撑与紧固件

SKY

Standard Laser Diodes

Flat window cap

文件：1.16126 Mbytes Page：5 Pages

包装：散装 描述：CUTTER OVAL BEVELED EDGE SHARP 工具 钢丝钳

3-Pin Microprocessor Reset Monitors

The MAX809 and MAX810 are cost–effective system supervisor circuits designed to monitor VCC in digital systems and provide a reset signal to the host processor when necessary. No external components are required. Features • Precision VCC Monitor for 2.5 V, 3.0 V, 3.3 V, and 5.0 V Supplies • Pre

3-Pin Microprocessor Reset Monitors

The MAX809 and MAX810 are cost–effective system supervisor circuits designed to monitor VCC in digital systems and provide a reset signal to the host processor when necessary. No external components are required. Features • Precision VCC Monitor for 2.5 V, 3.0 V, 3.3 V, and 5.0 V Supplies • Pre

3-Pin Microprocessor Reset Monitors

The MAX809 and MAX810 are cost–effective system supervisor circuits designed to monitor VCC in digital systems and provide a reset signal to the host processor when necessary. No external components are required. Features • Precision VCC Monitor for 2.5 V, 3.0 V, 3.3 V, and 5.0 V Supplies • Pre

NPN SILICON EPITAXIAL TRANSISTOR WITH BUILT-IN 2 x 2SC5006 FLAT-LEAD 6-PIN THIN-TYPE ULTRA SUPER MINIMOLD

DESCRIPTION The µPA810TC has built-in low-voltage two transistors which are designed to amplify low noise in the VHF band to the UHF band. FEATURES • Low noise: NF = 1.2 dB TYP. @ f = 1 GHz, VCE= 3 V, IC= 7 mA • High gain: |S21e|2= 9.0 dB TYP. @ f = 1 GHz, VCE= 3 V, IC= 7 mA • Fla

NPN SILICON EPITAXIAL TRANSISTOR WITH BUILT-IN 2 x 2SC5006 FLAT-LEAD 6-PIN THIN-TYPE ULTRA SUPER MINIMOLD

DESCRIPTION The µPA810TC has built-in low-voltage two transistors which are designed to amplify low noise in the VHF band to the UHF band. FEATURES • Low noise: NF = 1.2 dB TYP. @ f = 1 GHz, VCE= 3 V, IC= 7 mA • High gain: |S21e|2= 9.0 dB TYP. @ f = 1 GHz, VCE= 3 V, IC= 7 mA • Fla