DUAL 100mW AUDIO POWER AMPLIFIER WITH STANDBY MODE

DESCRIPTION The UTC S486 is a dual power amplifier capable of delivering typically 100mW per channel of continuous average power to an 8Ω load with 0.1 THD+N using a 5V power supply. The UTC S486 features an externally controlled, low-power consumption stand by mode. The UTC S486 exhibit a low q

DUAL 100mW AUDIO POWER AMPLIFIER WITH STANDBY MODE

The UTC S486 is a dual power amplifier capable of delivering typically 100mW per channel of continuous average power to an 8Ω load with 0.1% THD+N using a 5V power supply. The UTC S486 • Operating voltage range VCC=2V ~ 5.5V \n•     - 102mW @5V into 16Ω with 0.1% THD+N max (1kHz) \n• Low current consumption: 2.5mA max \n• Unity-gain stable \n• Short circuit protected;

DUAL 100mW AUDIO POWER AMPLIFIER WITH STANDBY MODE

文件：242.48 Kbytes Page：12 Pages

DUAL 100mW AUDIO POWER AMPLIFIER WITH STANDBY MODE

文件：266.13 Kbytes Page：12 Pages

DUAL 100mW AUDIO POWER AMPLIFIER WITH STANDBY MODE

文件：266.13 Kbytes Page：12 Pages

DUAL 100mW AUDIO POWER AMPLIFIER WITH STANDBY MODE

文件：266.13 Kbytes Page：12 Pages

DUAL 100mW AUDIO POWER AMPLIFIER WITH STANDBY MODE

文件：242.48 Kbytes Page：12 Pages

DUAL 100mW AUDIO POWER AMPLIFIER WITH STANDBY MODE

文件：266.13 Kbytes Page：12 Pages

DUAL 100mW AUDIO POWER AMPLIFIER WITH STANDBY MODE

文件：266.13 Kbytes Page：12 Pages

DUAL 100mW AUDIO POWER AMPLIFIER WITH STANDBY MODE

文件：242.48 Kbytes Page：12 Pages

DUAL 100mW AUDIO POWER AMPLIFIER WITH STANDBY MODE

文件：242.48 Kbytes Page：12 Pages

DUAL 100mW AUDIO POWER AMPLIFIER WITH STANDBY MODE

文件：242.48 Kbytes Page：12 Pages

DUAL 100mW AUDIO POWER AMPLIFIER WITH STANDBY MODE

文件：266.13 Kbytes Page：12 Pages

DUAL 100mW AUDIO POWER AMPLIFIER WITH STANDBY MODE

文件：266.13 Kbytes Page：12 Pages

DUAL 100mW AUDIO POWER AMPLIFIER WITH STANDBY MODE

文件：242.48 Kbytes Page：12 Pages

NPN SILICON RF POWER TRANSISTOR

NPN SILICON RF POWER TRANSISTOR . . designed primarily for application as a high-power linear amplifier from 1.5 to 30 MHz, in single sideband mobile, marine and base station equipment. • Low-Cost, Common-Emitter TO-220AB Package • Specified 28 Volt, 30 MHz Performance — Output Power = 40 W

Silicon NPN Transistor RF High Frequency Amplifier

Description: The NTE486 is a silicon NPN high frequency RF transistor in a TO39 type package designed for use in 12.5V UHF large–signal applications required in industrial equipment. Features: • Specified 12.5V, 470MHz Characteristics: Output Power = 0.75W Minimum Gain = 8dB

PROGRAMMING MANUAL

PRODUCT OVERVIEW The ST 486 DX core is based on the design of the SGS-THOMSON standard 486 DX4 product. The core is capable of operating at the “external” bus speed or at two or three times the bus speed up to a maximum of 120MHz. Since the design is fully static the core can operate at any frequ

100mW STEREO HEADPHONE AMPLIFIER WITH STANDBY MODE

DESCRIPTION The TS486/7 is a dual audio power amplifier capable of driving, in single-ended mode, either a 16 or a 32Ω stereo headset. Capable of descending to low voltages, it delivers up to 90mW per channel (into 16Ω loads) of continuous average power with 0.3 THD+N in the audio bandwitdth fro

NS486TMSXF Optimized 32-Bit 486-Class Controller with On-Chip Peripherals for Embedded Systems

文件：444.26 Kbytes Page：44 Pages